Question about Canon Office Equipment & Supplies
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Odds are is that the finishers exit bins got stuck while looking for it's HP. Most of the time it is a garbage can.... Move the object blocking the path of the exit trays first. Then turn the power switch for the finisher off first then turn the main power switch on the right side of the copier. Once it is all off > turn the finisher back ON first then the copier and then remove the paper jams.... Good Luck
Posted on Apr 25, 2010
SOURCE: error code for canon ir
This error is caused due to faulty thermister however; you can check the fuser unit for any jammed paper around the upper fixing roller and try to clean that area. After this is done try to clear the error by entering the service mode, to enter press Additional functions, #. Then go to #7 Printer and press OK, then go to #4 printer reset and press OK, yes= *. If the issue returns then replace the thermistor. Hope this helps...please post back for further assistance.
Posted on Feb 09, 2011
Tips for a great answer:
Oct 17, 2015 | Canon Office Equipment & Supplies
Oct 06, 2014 | Canon gpr-6 ir 2200/2800 drum...
Feb 14, 2011 | Canon iR5000-6000-L1 PS Ver 1.0
Apr 24, 2010 | Office Equipment & Supplies
165 people viewed this question
Usually answered in minutes!