Question about HP Office Equipment & Supplies

1 Answer

Printer hp 2055 fuser error 50.3 - HP Office Equipment & Supplies

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Re: hp laserjet 4100tn - 50.3 fuser error


A 50.3 error means that the temperature of the fuser got to high.
Just try switching it of for 20 minutes and try again.
If it happens during a large print job, this may help, if the error returns when powering up the machine, the fuser is faulty, but if so, that means it would have to be replaced.

If you are printing narrow media (A5, envelopes) etc. try printing them in small batches,, and allow the printer to cool of in between batches.

Posted on May 21, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp color laserjet 5500 error 59 ck printer error


list of error codes

http://www.printertechs.com/printer-troubleshooting/hp-error-codes/195-numeric-error-codes-50-59-hp-laserjet

HP COLOR LASER PRINTERS 4600, 5500 ERROR 59.3, 59.4 1. A fuser motor error. 2. Replace the fuser drive assembly. 3. Replace the D.C. controller board.

Jan 04, 2017 | HP Office Equipment & Supplies

1 Answer

Hp 1007 problem fuser error 50


The error 50 code on HP printers usually means a bad fuser unit.

Jul 08, 2015 | HP Office Equipment & Supplies

1 Answer

50.0 fuser error


Hi,
SOLUTION: Follow the steps listed below:
  1. Turn the printer off and unplug it for 30 minutes; then turn the power back on.
  2. Try a different power cord. DO NOT use extension cords to plug the printer in.
  3. Remove the surge protector or UPS/CVT device and connect the printer directly to a power source.
  4. Try a different electrical circuit. There could be an issue with the line voltage going into the printer from the power source.
  5. Turn the printer off and unplug it. Let it sit for 30 minutes to let the fuser cool off. Carefully remove the fuser; IT MAY STILL BE HOT USE CAUTION. Examine the fuser, if any damage is apparent the fuser may need to be replaced. If no damage is noted reinstall the fuser, plug the printer back in and power it up.
For More info Source... Hp Error Code 50 Service Errors 50 Fuser Printer Repair

Thanks,
HP Printer Support

Jun 26, 2014 | HP LaserJet Pro P1102

1 Answer

50 fuser error in hp laserjet 3015 all-in-one


Error 50.xx indicates Fuser faulty, replace it..

Sep 14, 2011 | HP LaserJet 3015 All-In-One Printer

1 Answer

Hp 4m shows service error 50


Hello,

The service 50 error indicates a bad fuser assembly. You can get one on Ebay for less than $50. To replace the fuser just open the door on the back of the printer, inside you will see the fuser, unscrew the 2 screws and pull the old one out. Insert the new fuser and screw it down, power on the printer and you should be good to go.

I hope this helps, If so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com
tech@ccl-la.com

Nov 13, 2009 | HP : HP4 Laserjet Printer

1 Answer

HP Laserjet 5m, appear error code 50...please help.


Error 50 will be a faulty fuser unit or DC controller board. Try replacing the fuser unit.

May 20, 2009 | HP LaserJet 4m plus Printer

1 Answer

Fuser 50.1 error on HP 3500 printer


From HP Website:
50.X FUSER ERROR Description A fuser error has occurred. Action
  1. Turn the printer off.
  2. Verify the fuser is properly installed and fully seated.
  3. Turn on the printer.
  4. If the message persists, contact HP Support.

Mar 23, 2009 | HP Color LaserJet 3500 Printer

1 Answer

HPLaserjet4P - printer service 50 -


Hi,

A 50 Service error is a fuser error. Turn the printer off for 5 to 10 minutes, then turn it back on. If the error is still there, I think your going to need to make a service call you can try reseating the fuser, but be sure to let the fuser cool completely before touching it.
Good Luck the HP Laserjet 4p is a great printer.

Jan 28, 2009 | HP LaserJet 4 plus Printer

1 Answer

My HP Color Laserjet 2840 and is saying "50.1 Fuser Error"


HP error message 50.X is usually a fuser error. replace fuser

Jan 13, 2009 | HP LaserJet 2840 All-In-One Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...