Question about Linksys SPA942 IP Phone

2 Answers

Button is yellow. Error msg Failed/No Response

Button is yellow. Error msg Failed/No Response

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

I don't know about linksys but in Cisco you can use a TFTP Server Program, put the firmware that server, and boot up the phone. In Cisco it goest to the server and it uploads the new firmware.

Posted on Jun 19, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

A yellow or orange on the line keys means that the phone is not registered or not configured to work with your voip.. For me to help you more, you will need the following:

1. your network segment or network address (usually same as pc)
2. your voip provider.

Posted on Oct 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Internal error 2 how do i reset this problem


you can try doing a a soft-test reset but if that doesn't work then you'll need to repalce the handset.

Power off the phone.
Press and HOLD the volume key (VOL) and the power key at the same time,
(the phone will chirp and display the serial number.)
Now...release ONLY the power key,
(phone will vibrate and make a long tone.)
Now release the volume key,
(the display will have a lot of black boxes and ZZZZ's - you will also see the bottom of the display showing "msg", "bat", etc.)
Count to three and then power off the phone.

May 18, 2011 | Spectralink (PTB400)

1 Answer

Display screen reads dhcp bad conflict


There is a dhcp error. Reboot the phone.
When It says, DHCP * to program, press the STAR button.

when the IP address is displayed, change it by press 0.0.0.0. Where the dots are would be the star button. then press the #(pound) button until you see save new values, press star for yes.

Hopefully that will force it to grab another IP from teh DHCP server.

If not contact your admin.

Jan 12, 2011 | Avaya 5610 IP Phone

2 Answers

The message light on my Avaya 9620 won't go out even though i don't have new messages. Any ideas on this?


This is what fixed this issue to me:

1. I added the buttons "next", "msg-retr" and "delete-msg"
2. On the IP Phone, press "msg-retr", "next" and then "delete-msg"
3. Do it for every single message to turn off the light
4. Smile!

Cheers from Brasil! =)

Dec 21, 2010 | Avaya 9620 IP Phone

1 Answer

Spectralink PTB400 internal error


Correcting Spectralink Errors Below are instructions on performing a “soft test” which will correct any internal error 8 and 4444-444C messages on your Spectralink phone. To aid you in educating your staff you may view the following Word document showing the step-by-step instructions. Please feel free to print and post this document where the Spectralink phones are kept on your floor. Soft Test Instructions
  1. Power off the phone.
  2. Press and HOLD the volume key (VOL) and the power key at the same time (the phone will chirp and display the serial number.)
  3. Now…release ONLY the power key (phone will vibrate and make a long tone.)
  4. Now release the volume key (the display will have a lot of black boxes and ZZZZ’s – you will also see the bottom of the display showing “msg”, “bat”, etc.)
  5. Count to three and then power off the phone.
This “soft test” is to correct only certain internal error messages. When the phone is experiencing a correctable error the display will read “internal error 8” or “internal error 4444-444C”. For all other internal errors the phone will need to be taken to Teleservices, NE-165 to be replaced.

As per : http://depts.washington.edu/uwmcdir/spectralink.html

Mar 16, 2010 | Spectralink (PTB400)

1 Answer

The msg button on 3COM nbx business pnone is not working


There isn't any configuration needed on the Phone system or the phone to make this work. The light must simply have burned out. This would require a new phone to work (unless you know how to solder). f it's under warranty then you can get it replaced for free (1yr). you can also map a button on the right to light up/access the same mail box as a work around.

Feb 10, 2010 | 3Com NBX 3102 IP Phone

1 Answer

Need owners manual or instructions for pic msg and songs


brand and type for the manual only then i can searts for it

Aug 15, 2009 | Computers & Internet

1 Answer

Nortel IP phone 1220 - LED indicator not switching off


keep pressing either the exit button on the center button

Jul 15, 2009 | Nortel 1210

1 Answer

As soon I turn on it shows internal error 8 & 4444-444c


http://depts.washington.edu/uwmcdir/spectralink.html Correcting Spectralink Errors Below are instructions on performing a “soft test” which will correct any internal error 8 and 4444-444C messages on your Spectralink phone. To aid you in educating your staff you may view the following Word document showing the step-by-step instructions. Please feel free to print and post this document where the Spectralink phones are kept on your floor. Soft Test Instructions
  1. Power off the phone.
  2. Press and HOLD the volume key (VOL) and the power key at the same time (the phone will chirp and display the serial number.)
  3. Now…release ONLY the power key (phone will vibrate and make a long tone.)
  4. Now release the volume key (the display will have a lot of black boxes and ZZZZ’s – you will also see the bottom of the display showing “msg”, “bat”, etc.)
  5. Count to three and then power off the phone.
This “soft test” is to correct only certain internal error messages. When the phone is experiencing a correctable error the display will read “internal error 8” or “internal error 4444-444C”. For all other internal errors the phone will need to be taken to Teleservices, NE-165 to be replaced.

May 16, 2009 | Spectralink (PTB400)

1 Answer

Unregistered, registering a new base, faillure....


IF YOUR HANDSET WAS WORKING AND THEN STOPPED WITH "UNREGISTERED":
If lowercase unregistered is in main display and a reg. appears under the left soft key:
Press the left soft key below REG. and then press and HOLD the button on the top of the base station until the two indicator lights on top of the base station turn off. Wait until handset signals with beeps and registered. You are done

THIS IS FOR FRESH OUT OF THE BOX REGISTRATION OF UNREGISTERED HANDSET
Press REG Register shall be highlighted.
Scroll to Register. Press Select.
Enter the system PIN (Default: 0000). Use
CLEAR to correct typing errors.
Press ENTER to confirm.
• Your handset starts searching for the base.
Press and HOLD the round button on top of the base unit until the two
indications turn off.
• If registration is successful, the signal icon

Jun 22, 2008 | Philips VOIP8411B/37 IP Phone

2 Answers

1140E phone upgrade


C1B is ancient UNIStim firmware. You cannot downgrade to it. Try converting to a more recent UNIStim version. You can download firmware from www.nortel.com/support.

Mar 17, 2008 | Nortel 1140E

Not finding what you are looking for?
Linksys SPA942 IP Phone Logo

Related Topics:

1,564 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...