Question about Lutron Electrical Supplies

Open Question

Some moisture got into my rania dimmer and it's not coming on now. Do i need to replace the whole thing?

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Lutron rania dimmer how does

The question is unclear.
Switches are single-pole or 3-way.
Single pole switches have 2 screws plus green ground screw.
3-way have 3 screws plus green ground screw.
I don't see Lutron rania dimmer
http://www.lutron.com/Products/StandAloneControls/Dimmers-Switches/Pages/DimmersSwitches.aspx

Identify your switch and your dimmer and add a comment.
I will look up the information.

Posted on Nov 13, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2001 Expedition Eddie Bauer. One of the AC lines has failed and I lost the freon. How hard is it to replace just the line? What needs to come apart? Thanks


Depending on what line it is, that varies on how hard it is to replace. Being at home, unless you have a vacuum pump to remove moisture from the a/c system, the whole repair will be next to impossible. If you can replace the line, you will need to find a professional shop to evacuate and recharge your a/c system. If you recharge the system without removing moisture it will not cool well.

Mar 27, 2011 | 2001 Ford Expedition

1 Answer

I bought a Hunter fan Model 21778 that uses 2 incandescent candelabra lights. Before installing it I called Hunter support to see if it was okay to use a dimmer switch for these lights (I had already...


They're right, you don't want to control the whole thing with a single incandescent dimmer. First of all, the fan-speed and the lights will all be controlled by the same dimmer setting (dim low, low fan-speed - dim high, high fan-speed) - and the dimmer's not rated to control fans anyway which can result in exactly what they said.

There is a Skylark control, the S2-LFSQ- where half the knob controls the light, the other half controls the fan. The only problem you may (and most likely) have is that in order for that to work, between the electrical box for the dimmer and the fan, there needs to be seaparate wire run for the fan, and a separate wire run for the light so that the dimmer can individual control both.

If that's a problem, I recommend the MA-LFQM-, which includes a module that you install in the ceiling with the fan. The wall switch it comes with speaks to that module, and gives you independent control of the fan and light without having to install new wiring. I have one of those myself, I've installed one in one of my friend's houses, and they work pretty well and then you don't have to worry about what wires you've got in your wall.

Jan 19, 2011 | Lutron Skylark Incanhalogen Dimmer 600w ...

1 Answer

I bought a MAW-603 with an accessory dimmer to be placed in a 4 way circuit. I followed the instruction on how to connect the accessory dimmer in the 4 way switch location but doesn't work. When I leave...


You are saying that you have a "4-way circuit". That means that you originally had two 3-way switches and at least one 4-way switch. ALL existing mechanical switches _must_ to be replaced with electronic dimmers in order for things to work correctly. You must have only _one_ master dimmer (MA-600) located wherever you desire. All of the other switch locations must be companion dimmers (MA-R)., NOT mechanical switches.

The MAW-603-RH comes with a master dimmer and one companion dimmer, so I suspect that you need to install one more companion dimmer.

Jan 16, 2011 | Maestro Lutron MAW-603-RH 3-way 600 Watt...

1 Answer

96 Honda Civic. In cold weather, headlights won't come on unless high/low dimmer switch is pulled towards driver. As long as the switch is held in that position, the headlights work. After a couple of...


the "dimmer switch" is part of the combination switch. They wear down, internally - I've taken apart a used one, so I know. Also, the headlamp connectors like to corrode on that model year ( I also have 96 civic, and had to replace a headlamp connector). https://www.hondapartsnow.com/parts-list/1996-honda-civic-4dr_ex-ka-4at/combination-switch.html (parts 8 and 9)

Apr 10, 2017 | 1996 Honda Civic

1 Answer

Lutron rania dimmer how does this connect to an existing 2 way system and what connections are required


The question is unclear.
Switches are single-pole or 3-way.
Single pole switches have 2 screws plus green ground screw.
3-way have 3 screws plus green ground screw.
I don't see Lutron rania dimmer
http://www.lutron.com/Products/StandAloneControls/Dimmers-Switches/Pages/DimmersSwitches.aspx

Identify your switch and your dimmer and add a comment.
I will look up the information.

Nov 12, 2010 | Electrical Supplies

1 Answer

LUTRON SINGLE POLE DIMMER WHEN YOU SLIDE TO THE BRIGHTEST LIGHT AFTER A 15 SECONDS IT DIMS ITSELF BACK TO HALF BRIGHT


Unfortunately, there really isn't a whole lot you can do here to fix it, any attempt you make to strengthen the grip on the slider may gum up something else in the process. Usually they test for this sort of thing before it leaves the factory so I'm actually quite surprised. The best suggestion I can offer is to call their technical support line (they're available 24/7) and they will probably replace the unit for you.

Aug 20, 2010 | Slider Lutron: Dual Fan Control / Light...

2 Answers

Replacing high brake light bulb 2003 blazer


It's mounted up on the roof and held on with a screw on each end. There's a sticky gasket under it to keep the moisture out. Remove the two screws (usually phillips head, but sometimes torx 20 or 25) and persuade it come (peel essentially) off. Pull it out slowly to reveal the plug and unplug it. It's an LED strip so the whole thing will have to be replaced. Easily located on a popular auction based web site for about $50.

Feb 28, 2010 | 2003 Chevrolet Blazer

1 Answer

2000 Chevy Impala Battery problem, got new battery worked fine for a few days and then it has to be boosted again. Something running the battery down.. Then the bright dim switch for the head lights...


Sounds like your headlight dimmer switch has gone bad and was shorting everything out

You will need to order an HEADLIGHT DIMMER SWITCH

And you have to take the steering column apart (remove air bag and steering wheel) to replace it.

This take special tools and knowledge...if your not sure take it to a pro.

Jan 18, 2010 | 2000 Chevrolet Impala

Not finding what you are looking for?

Open Questions:

Electrical Supplies Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lutron Electrical Supplies Experts

Steve

Level 3 Expert

3289 Answers

jdthefixer

Level 3 Expert

744 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Are you a Lutron Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...