Question about Master Heaters Lift-master Sears Craftsman Opener Keypad 976lm Frees&h

1 Answer

Lift master remote not working

Our lift-master garage door opener can only be operated with the wired control now. Both remote controls suddenly stopped working the same day. Changing the battery didn't help. I also tried reprogramming them, but the opener didn't take. It's almost like the remote controls are "locked" out. But I also tried locking and unlocking the opener with no luck.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 284 Answers

It seems that the reciever part is defective, likely to surge or lighting, you have to have that module replaced.
Tony

Posted on Apr 16, 2014

  • Ken Chu
    Ken Chu Apr 16, 2014

    Thanks for the answer, Tony. Does that mean I need a new logic board for the opener?

  • Tony Mitri Apr 16, 2014

    unfortunately you do, unless you have knowledge of the board to fix it yourself, I do not think that the price of those board is worth your while to fiddle with it, they are pretty cheap

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change code on the garage door opener and the remote control on a lift master garage door opener


If you have a 315MHZ LiftMaster Garage door opener do the following:
Follow the purple wire (Antenna) up and you will see a square purple button.
Press and hold the square purple button for ten seconds until the amber led goes out.
Press and release the purple button one time (The amber led will come on solid).
Press and hold the button on the garage door opener remote control for two seconds (The light bulb on the garage door opener will blink and you will hear a click sound the amber led will go off).
to program the wireless keypad do the following:
Press and release the purple button one time (The amber led will come on solid).
Enter a four digit code into the keypad then press and hold the enter button for two seconds (The light bulb on the garage door opener will blink and you will hear a click sound the amber led will go off).

Aug 08, 2014 | liftmaster Lift Master 377LM 376LM 315 MHz...

1 Answer

Push buttons on remotes won't raise/close lift master mod 81lm


Check to see if the light in the wall control is flashing. If it is press and hold the lock button for 3 seconds.

Jun 13, 2012 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Master lift remotes suddenly won't work. Wired panel button works opening and closing door.


Make sure the light in the wall control is not blinking. If it is press and hold the lock button on the wall control for 3 seconds.

Feb 11, 2011 | Sears Craftsman LiftMaster Chamberlain...

2 Answers

Lift-master 2000SDR remotes will open but not close garage door. Same problem with all clickers and even those programmed into the cars. What could this be and better yet, how do I fix it?


Lift-Master 2000SDR opener. Opener generally works fine from the remotes. However, first time in the morning in cooler weather, it will start to close and the reverse and the lights blink. I have checked the senors - appear to be aligned properly. I have lubed the gear and used garage door spray on the rollers and hinges at the proper places. To close the door when this happens, I have to hold the wall button.

Nov 25, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

Programming car remote using garage door opener remote control fo


GOTO HOMELINK.COM

THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.

PLEASE NOTE: NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.

HOPE THIS HELPS

Jul 03, 2009 | 2003 Lexus ES 300

1 Answer

Garage Opener Model 3255 Chamberlain Lift Master


The most common cause of this problem is a bad wall control the wiring going to it. You can eliminate both temporarily by removing the wire at terminal 1 on the back of the motor unit. The wiring sometimes is shorted by the staples the installer uses. The wall control gets used a lot.

Jun 23, 2009 | Sears Craftsman LiftMaster Chamberlain...

Not finding what you are looking for?
Master Heaters Lift-master Sears Craftsman Opener Keypad 976lm Frees&h Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Master Heaters Home Security Experts

kakima

Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

15557 Answers

Lawrence Oravetz

Level 3 Expert

9587 Answers

Are you a Master Heaters Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...