Question about KitchenAid 32685 Mixer

1 Answer

KitchenAid mixer does not turn on - KitchenAid 32685 Mixer

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • KitchenAid Master
  • 1,316 Answers

Check the motor carbon brushes, remove the back cover and check for broken or disconnected wires. Using a multi meter check the main cable for continuity from wall plug to the speed control board. That will be the black wire and the white wire at the bottom on one side of the control plate. After that check fields for continuity, that will be between the 2 wires on the bottom on the other side of the control plate and the brass insert inside the brush holders. One of the wires will be a circuit through the fields to one of the brush holders.

Posted on Mar 02, 2016

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: My KitchenAid Mixer won't turn on

Check your Brushes  or bushings or whatever there called ) those little black things on the side of your mixer above the speed selector and the up/down switch) Check to see if they have started to wear down then i recommend taking it in for service. Good Luck!

Posted on Dec 07, 2008

KevinWhite
  • 1902 Answers

SOURCE: Kitchenaid Mixer stopped working checked power

Hello & Welcome to FixYa

I believe the motor is bad and needs replacement...Motor brushes goes bad after sometime and replacing the motor is recommended repair. Please get back to me if you have any other questions.

Kevin

Posted on Jan 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kitchen aid stand mixer. model #rkt2651x. it goes very fast when turned on then shuts off. it will go again but turns right off again. age?


That is indicative of worn motors brushes or a speed regulation circuit board problem. It is worth getting it fixed.

I just checked and my diagnosis is sound :>)

I have a kitchen aid stand mixer. model #rkt2651x. it goes - Fixya

www.fixya.com/support/t26909658-kitchen_aid_stand_mixer_model
52 mins ago - i have a kitchen aid stand mixer. model #rkt2651x. it goes very fast when turned on then shuts off. it will go - Food Mixers question. SOLVED: Mixer goes really fast then stops
29 Dec 2007
Questions, Troubleshooting Help & Support Page 3
28 Jul 2006
More results from www.fixya.com

KitchenAid Classic Mixer K45SSWH Troubleshooting - iFixit

https://www.ifixit.com/Wiki/KitchenAid_Classic_Mixer_K45SSWH_Troubleshooting Make sure the KitchenAid Mixer is firmly plugged into a working outlet and the cord is not twisted or split. ... If your mixer still will not turn on, it might be a problem with the motor brushes. If the brushes are worn down ... The most common sign of a failing hall sensor is if your mixer increases to top speed and then shuts down. Missing: rkt2651x

Stand Mixer Shuts Off During Use - KitchenAid Product Help

producthelp.kitchenaid.com > ... > Stand Mixer Assembly and Operation Jul 12, 2017 - Once the steam has dissipated, the unit should turn on again (about 3 minutes). Resolution: If the mixer could have overheated during use let the mixer cool for at least 30 minutes and try to re-start. If you were making mashed potatoes when the mixer shut off it's possible that with excessive steam the unit ... Missing: rkt2651x

images for kitchen aid rkt2651x stand mixer goes very ...





More images for kitchen aid rkt2651x stand mixer goes very fast when turned on then shuts offReport images

FAQs - KitchenAid

https://kitchenaid.com.au/faqs Explore our range of frequently asked questions to get the very most out of your KitchenAid product. Missing: rkt2651x

[PDF]Classic Stand Mixer Speed Control - KitchenAid

https://kitchenaid.com.au/sites/.../stand_mixer_service_manual_speed_control_6-12.p... KitchenAid®. Classic Stand Mixer. Speed Control. Theory of Operation. And. Troubleshooting Guide. (revision date 6/19/2012). D. Pahl ... Mixer Does Not Shut Off page 6. Mixer Does Not Turn On page 7 ... the motor is not running (OFF) the governor ball plate is at its farthest forward position and when the motor is running at ... Missing: rkt2651x

How to Replace the Speed Sensor and Control Board on a KitchenAid ...

? 6:28
https://www.youtube.com/watch?v=41qTqTWQkMI Jan 15, 2013 - Uploaded by eReplacementParts.com
This video tutorial will show you how to replace the speed sensor and control board on a KitchenAid Pro 6 ...Missing: rkt2651x ‎turned kitchenaid rkt2651x stand mixer goes very fast when turned on then shuts...

Mar 10, 2018 | Food Mixers

2 Answers

How do i change the brushes in my kitchenaid mixer?


Solution for these KitchenAid Stand Mixer Models
  • KitchenAid Stand Mixer Service Manual - K45SS
  • KitchenAid Stand Mixer Service Manual - K5SS
  • KitchenAid Stand Mixer Service Manual - KP50P
  • KitchenAid Stand Mixer Service Manual - KSM50P
  • KitchenAid Stand Mixer Service Manual - KPM5
  • KitchenAid Stand Mixer Service Manual - KSM5
  • KitchenAid Stand Mixer Service Manual - KPM50
  • KitchenAid Stand Mixer Service Manual - KSM75
  • KitchenAid Stand Mixer Service Manual - KSM90
  • KitchenAid Stand Mixer Service Manual - KSM103
  • KitchenAid Stand Mixer Service Manual - KSM110
  • KitchenAid Stand Mixer Service Manual - KSM150
  • KitchenAid Stand Mixer Service Manual - KSM151
  • KitchenAid Stand Mixer Service Manual - KSM156
  • KitchenAid Stand Mixer Service Manual - KSMC50
Fix KitchenAid Stand Mixer Workshop Service Repair Manual Download

Jun 18, 2014 | KitchenAid KSM90 Ultra Power Series Stand...

1 Answer

Kitchenaid mixer shoulder


The mixer turns on but it is not turning. What's wrong please.

May 06, 2013 | KitchenAid KITCHEN AID 5 Quart Artisan...

1 Answer

Have a kitchenaid stand mixer Model # KP26N9XER the attachment hub is not turning correctly it only turns a liitle at a time with a thumping sound. Opened up looked at the gears and their are bits of metal...


Obtain a copy of the Repair Part List for your model from Kitchenaid.com
Download the Service Manual :
http://www.kitchenaidparts.be/centers/servicemanual/mixer.pdf

It is not exactly for your model but you can learn a lot from it.
Open up your mixer. Get rid of all the grease. Replace the Worm Gear.
Use fresh Kitchenaid Food Grade Grease on all gears.

Caution: Do not use a screwdriver to pry out the Planetary Assembly.

Jun 20, 2011 | KitchenAid ProLine 600 Stand Mixer

1 Answer

My kitchenaid mixer seems to have dropped down to low in the bowl


Tip the mixer up and look for a screw on the hinge underneath the top part. Turn this screw counterclockwise about 2 turns and the paddle will clear the bototm of the bowl.

Feb 01, 2011 | KitchenAid K45SS Classic Stand Mixer

1 Answer

Brand New Kitchenaid Artisan Mixer - Mixer head is stuck


Unplug the mixer, turn the whisk the opposite of normal rotation in a quick motion, the remove a per normal.

Feb 19, 2010 | KitchenAid KSM150PS Artisan Series Stand...

1 Answer

I have a Kitchenaid Professional 5 Plus Mixer beaters won't turn


It sounds like it has been overloaded and the worm gear has been stripped. You will need to take the head apart to confirm this.

Jun 24, 2009 | KitchenAid K45SS Classic Stand Mixer

3 Answers

Are attachments for a KitchenAid K5 compatible with the K55?


That would be incorrect. If the attachment is for a hobart kitchenaid mixer then it will fit all models of kitchenaid mixers including the brand new pro series because the attachment port and drive gear has not been changes since 1925 or 6 when it was first introduce by the Hobart company.

Apr 01, 2009 | KitchenAid K5SS Heavy Duty Commercial...

1 Answer

Kitchenaid mixer races when turned on


Hi. Get in touch with Kitchenaid Parts and order a new Control Board. If your mixer is still covered by warranty it's free. ricardok45

Dec 23, 2008 | KitchenAid KSM150PS Artisan Series Stand...

1 Answer

My KitchenAid Mixer won't turn on


Check your Brushes  or bushings or whatever there called ) those little black things on the side of your mixer above the speed selector and the up/down switch) Check to see if they have started to wear down then i recommend taking it in for service. Good Luck!

Nov 19, 2008 | KitchenAid K45SS Classic Stand Mixer

Not finding what you are looking for?
KitchenAid 32685 Mixer Logo

Related Topics:

262 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

jack arons

Level 2 Expert

44 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...