Question about Elite Home Security

Open Question

Ramset gate adjustment - Elite Home Security

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dltatsjc
  • 54 Answers

SOURCE: Hi, My electric gate RAMSET

Look for a broken or missing shear pin that connects the drive sprocket to the motor. the pieces should still be in the sprocket and motor shaft if it is a roll pin, which I would expect, and will need to be punched out with an appropriatly sized drift pin punch, It's usually easier to drive out the pieces if the sprocket is removed from the shaft so the holes don't have to be matched up. Replace the pin with one of the same size if available, a soft steel bolt and nut may be used in a pinch but should be replaced with the proper roll pin as soon as possible.

Posted on Nov 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manual for Red Head model 823 tool concrete nailer


Ramset - Powder Actuated Tools - YouTube

? 2:28
https://www.youtube.com/watch?v=MD-yAjSPgwU
May 2, 2008 - Uploaded by New Hope Media
Short compilation from the full 15 minute Ramset Powder ActuatedTools DVD. Available ... Fastening ...

Omark 823 powder actuated 22 cal tool concr



Dec 19, 2015 | Air Tools & Compressors

1 Answer

Where in Tauranga can I get a new battery for this 18volt Procut?


18V Battery and Charger - Ramset New Zealand

www.ramset.co.nz/Product/Detail/265/18V-Battery-and-Charger
18V 40Ah Heavy Duty Lithium Ion battery and 18V charger.

Oct 27, 2015 | Drills

1 Answer

Ramset gate opener 1000 receiver/transmitter weak


You have a power leak in the remote; change it!

Sep 10, 2015 | Building Materials

1 Answer

Cast shell holder j20 ramset gun


You can try Eamset direct, but the tool is out of production for some time.
http://www.ramset.com/

Dec 15, 2012 | Tools & Hardware - Others

1 Answer

How to wire a photo eye to a Ramset


Ok, so you only want the Ramset to receive power at night?
Or you want to reverse photo-eye operation and only have Ramset receive power in day?

Are you working with household single-phase, or commercial three phase?
If this is at your home, what voltage are you working with 120V or 240?
What size circuit breaker controls power to this unit. Is it a single breaker for 120Volt, or double breaker for 240Volt. Look for power line coming from circuit breaker box.
For household wiring (non 3-phase), the power line from breaker box will have 2 wires, plus a ground.
The additional wires you have are probably for reversing motor, but I can't see the wires.

Copy following link to get started. And then add a comment, or re-post with more details, for example if you have link to the product manual with wiring diagram.
http://waterheatertimer.org/How-to-install-and-troubleshoot-photo-eye.html

Aug 12, 2012 | RAMSET Ram 100 Slide Gate Operator 1/2HP...

1 Answer

Hi, My electric gate RAMSET 100 turns but does not pull the chain to close or open the sliding gate. What do you think it's wrong with it? Thanks in advance.


Look for a broken or missing shear pin that connects the drive sprocket to the motor. the pieces should still be in the sprocket and motor shaft if it is a roll pin, which I would expect, and will need to be punched out with an appropriatly sized drift pin punch, It's usually easier to drive out the pieces if the sprocket is removed from the shaft so the holes don't have to be matched up. Replace the pin with one of the same size if available, a soft steel bolt and nut may be used in a pinch but should be replaced with the proper roll pin as soon as possible.

Nov 13, 2010 | RAMSET Ram 100 Slide Gate Operator 1/2HP...

1 Answer

WHERE CAN I GET NAILS FOR THE RAMSET 1000 NAIL GUN


Any drywall supply should handle them. Try to stick with genuine Ramset, they have the best fuel. You can buy pins for the Ramset Trakfast along with fuel, batteries and more ConstructionFastening.Net

Nov 02, 2010 | Nailers 1000 Trakfast Ramset 34 Fpp034b...

3 Answers

Gate stays open and does not close unless timer switch is turned off


I have a brand new Ramset 300 electric gate opener. My problem is in the early morning when the loop opens the gate it will not close unless deactivated manually. It does not happen later in the day with my GMC truck but happens early in the am with my husbands Toyota Prius. Please help. What can be the problem?

Jun 19, 2010 | Elite Sl 3000 Ul Sliding Gate Operator

Not finding what you are looking for?
Home Security Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Elite Home Security Experts

John

Level 2 Expert

125 Answers

jr3261

Level 2 Expert

43 Answers

Brad Brown

Level 3 Expert

15478 Answers

Are you an Elite Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...