Question about Kuppersbusch Glass ceramic induction hob with sensor touch controls and panon detection Metallic Cooktop

1 Answer

Telefunken spare parts australia

Our power went off today and when I powered the EKI607 ceramic induction hob on again the two left hand plates (front left and rear left induction cooking zones) are not working and are showing an error E 6. We live on an island and are not near an electrical supplier so would appreciate information for an authorised service agent in southern Tasmania.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 117 Answers

Try turning off the power for a short while to allow the p c board to re set itself turn it back on and individually turn on each elements for a few minutes. Good luck
Ray

Posted on May 10, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

BElectric
  • 1140 Answers

SOURCE: Hey, what can I do if on a ceramic hob there is no

Hi,

You've probably accidentally activated the child-lock "L". It would help to know which model you have as the deactivation method can vary on different models. However, this is the process for activation or deactivation on the EKI-848 which looks like the one in the above picture:

Switching off the childproof lock

1. Press the ON key.

2. Then immediately press the Plus key of the cooking zone at the left-back and the Minus key of the cooking zone at the right-back simultaneously.

3. Then press the Minus key in order to deactivate the childproof lock. The "L" will go off.


If this doesn't work or you have a different model, please post back and I will let you know the correct deactivation method for your model.


Hope this helps.


Regards,

BElectric

Posted on Nov 23, 2010

Testimonial: "Thanks for the VERY quick answer! It did help! :)"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Residual indicators & right hot plates don't work!


LOL like the way you put that about FAULTY ELECTRICIAN . and that would be my guess also .

Feb 11, 2016 | Cooktops

1 Answer

Wiring for Kenmore Elite Induction Cooktop


The white one may just form an earth loop,, I recently had a ceramic plate needing cleaned so we did the whole lot, I think most hobs have 4 wires and they are numbered rather than colour coded..hope this helps

Nov 10, 2013 | Kenmore 30" Induction Cooktop Stainless...

1 Answer

I have broken the glass on my induction cooker


ENr is on rating plate on bottom of hob. The Ceramic top is easy to replace, it is held on by 3 pozi screws on each side (12 altogether) and just sits on the main electrical parts, obviously the unit should be isolated from main before you remove the top. Part can be ordered using the link
http://www.bosch-home.co.uk/store/spareparts/search

Mar 16, 2013 | Bosch Cooktops

3 Answers

When turning on my 2 year old Neff induction Hob T4543N1 it displays a full set of E errors and cuts out it does after two attempts corect itself and function perfectly


I had flashing Es every time I turned the hob on - got worse and worse until unusable. Neff help line useless - service call cost ridiculous. My problem was the capacitor on the 5 volt power supply had failed. 5 volt supply was at 3.8 volts. Replaced the capacitor and the hob's now perfect - a joy to use. Only helps if you are tech savvy and willing to open the unit, but may give you some hope or point you in the right direction.t

Jul 28, 2010 | Neff Cooktops

2 Answers

Replacing faulty regulator for hotplate


Remove hotplate and oven control knobs. Under the 2nd and 5th knobs is an extra screw which holds on the front cover. Unscrew these and free the cover then access is gained to the screws (2 on each edge) which removes the plate to which the regulators are fixed.Remove the faulty regulator by unscrewing it from the plate,(2 screws) It is an easy job then to install the new part taking care to put the correct wires on the correct terminals. Reassemble, job done!

Jan 11, 2009 | Belling Cooktops

1 Answer

Induction hob switching off


check that the hob is wired correctly underneath 1,2,3 should be linked together as live 4,5 as neutral and earth takes its place as earth,

if it is wired correctly then i m afraid the hob needs a new induction element it is all one complete unit on these hobs not seperate so your looking at £1000 + to fix it plus engineer call out charges

Dec 06, 2008 | Kuppersbusch K 23 in.EKE604.2 Electric...

2 Answers

Zanussi Ceramic hob ZKT641H front/main left zone does not heat up


can't give you much guidence - will be either regulator or the plate itself. no easy way to find out. you will have to remove the hob top and check for continuity thro the plate. ifplate is ok, then power up and check for supply to the plate. if no supply, then the regulator will be at fault

Aug 27, 2008 | Zanussi 23 in. ZKT641H Electric Cooktop

1 Answer

Neff T1722 so 02 ceramic hob


its normal for the ceramic hob to ON & OFF coz of the sensor inside the unit to protect for overheating.same here in phillipines.its normal.tnx gerbee

Jul 28, 2008 | Neff 23 in. T1443 Electric Cooktop

Not finding what you are looking for?
Kuppersbusch Glass ceramic induction hob with sensor touch controls and panon detection Metallic Cooktop Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kuppersbusch Cooktops Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Gil Shultz

Level 3 Expert

3368 Answers

Bill Boyd

Level 3 Expert

40701 Answers

Are you a Kuppersbusch Cooktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...