I need software and driver for yamaha i88x audio midi interface

First : you need to check if the midi in works with another computer or another software to know if you have a physical problem (some parts does not work) or installing & programmation problem
1- if the problem if physical : you need to ask someone to repair it if possible
2- if the problem is not physical , you need to reinstall your interface (or looking for the latest driver version for your system) or to check if your computer's system misses some files (like dll files or other system files)
3- check your microphone or your XLR wire
Good Luck

Assuming you have a MIDI interface on your computer, you need to connect the MIDI cables between the keyboard and the PC. You cross connect, that is, in to out and vice versa. You will ALSO need the driver software for the interface in the PC AND most importantly, some software in the PC to handle the MIDI for instance to record.

go to the link below
http://usa.yamaha.com/products/music-production/interfaces/uw500/?mode=model
download the drivers for your OS.

You can connect it with USB connection to your computer. It should be plug and play, but some drivers might be required.
You can connect it also via MIDI interface: - you will need sound-card with MIDI input connector, or you can use special MIDI device like M-Audio UNO.

The UCA222 is a USB AUDIO Interface, not MIDI.

You want to download the ASIO driver(s) and install those again. You then have to go to whatever audio software app you are using, and 'set up' the ASIO drivers within your audio software itself (read the manual or look at some of the headings under Preferences or Settings in the software window itself).

Also go to the Audio Settings panel and configure your Audio Ins / Outs, make sure they are selected and 'enabled'. You should see Behringer USB listed when you click on the audio out tab. Just click on it with the mouse button and release.

You also may have to go to the ASIO Control Panel (again from within whatever audio app you are using) and tweak whatever settings are there. Make sure the ASIO driver is selected (not the MS Win or Realtek or whatever), and check that the audio outputs are likewise enabled there.

(Some apps won't output any sound while you are adjusting the Control Panel settings etc, so you may have to adjust the settings, then close the panel, before you'll be able to test for audio output, then if it doesn't work, go back into the panel and adjust some more and try again.)

If you are trying to control a VST plugin or VST Instrument via MIDI, you just need to go into your audio app's Midi Settings panel and likewise make sure your Midi controller kbd (or other Midi source) is selected and enabled, and that the appropriate Midi channel is enabled (or you can just select Omni Mode and it will listen to all Midi channels).

Of course you must have some sort of MIDI interface to connect your keyboard to your computer. Many new kbds have USB in which case it will send/receive midi via USB (tho you may have to install the proper drivers for your specific keyboard first. - they will be on your install CD that came with the keyboard or available on the internet).

Good luck! Hope some of this helps.

how can i play .bup file in computer?

ok here is the solution!!!!!!!!

• we should have a mic pin and audio cable as shown in this pic
• 
connect these cables,and connect big pin to the piano and small pin to the computer (mic or input jack)

now take windows movie maker (start-all programs-windows movie maker). click on narrate timeline (as a mic icon below windows movie maker).

now click start narration on the pc and play your song on the piano. you can see input level highlights. now your song is recording. when your song completes click stop narration and save to the pc. walah if you can't understand this say to me. i can add video. sry for my worst english

Any pro-audio interface with a midi input would do the trick. There are numerous products out there that offer this. You can get a simple usb midi interface, and connect the Yamaha up with a midi cable running from the midi out of the drum module to the nidi in of the interface.

one of the simpler ones:...

http://www.amazon.com/M-Audio-Midisport-Uno-MIDI-Interface/dp/B00007JRBM

What is your computer and operating system....?

Oh, and go here...


http://www.tascam.com/details;9,15,68,19.html

Keep me posted.

go to this website for free download of driver

http://www.tascam.com/details;9,15,69,19.html

ok..try this open control panel->click on sounds and audio devices...click on advanced button->If your midi volume control is shown..make sure it is not muted and the midi volume is high..If it is not shown..then click on options->properties ->tick the midi box and close the window..then adjust the MIDI volume..I hope this helps
Regards,
VJ