Question about Kenmore Washing Machines

Open Question

Ken more washer 970-c41032 not draining - Kenmore Washing Machines

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
blueextc3221
  • 15935 Answers

SOURCE: kenmore washer model #970-c41032-00 series

It appears your pump has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 30, 2010

Ad
kvhappliance
  • 218 Answers

SOURCE: My front load washer 970-C41032

See link below
http://www.fixya.com/TipsAndTricks/ThreadView.aspx?thid=4507357

Posted on Nov 03, 2010

kdrake84
  • 262 Answers

SOURCE: On a Kenmore frontload washer-model#970-C41032-00--I

Hi Rene

If you haven't had the "squeak" during final tumble then that takes the bearings out of the equation.

Shocks have been replaced.(add some vaseline to the shocks this will sometimes take care of any "squeraks")

That would leave the belt and or the belt pulley.
Take off the back panel....run the washer on spin and see if you can tell where this "squeak" is coming from. After you have added the vaseline to the shocks.

Maybe something is coming loose,you will surely be able to hear/see what is going on after your inspection.

Any further questions please ask.

Let me know what you come up with please.

If this information helped you please consider giving us a 4 thumbs up for our rating.

Thanks in advance and Thank You for using FixYa!

Keith


kdrake84_125.jpg

Posted on Feb 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is the KENMORE Model # 970-C41032-00 washing machine a high efficiency he machine ?


Is it a front loader? Then I would say yes and does it have he anywhere on the machine?

Jun 26, 2017 | Kenmore Washing Machines

1 Answer

Kenmore front load washer 970 c41032 00


Your spider assembly has corroded and broken. The exact same thing happened to my own washer (same model number as yours). Here's a picture of what it looks like inside.
6242bb5f-6181-45a1-bd68-9973e6a63325.jpg
This other guy made a youtube video demonstrating the same problem with his washer. As explained in the video, the replacement part cost $200 (in 2007).

After taking apart my own washer, I can tell you that it's not easy to replace this part. It took me several hours to get the washer apart. Even if I were to replace the defective spider assembly, I doubt I could get it back together without screwing it up. Also, the drum's scratched all to hell. Time to get a new washer.

Jul 26, 2013 | Washing Machines

1 Answer

My kenmore washer 970-C47092-10 after pressing start button ERR appears and does not spin


hello check the pump it has to drain before it spins also the filter if it has 1 hope it helps

regards
shaun

Apr 03, 2011 | Kenmore Washing Machines

1 Answer

Kenmore washer model #970-c41032-00 series #xc34218194 will not drain anymore


It appears your pump has failed in this instance.

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Jan 03, 2010 | Kenmore HE2 Plus Front Load Washer

1 Answer

Kenmore 970-227410 Freezer Water pools in


thaw drain it may be stopped up it will make it do what u r talking about

Nov 07, 2009 | Cars & Trucks

1 Answer

Hi There. My Kenmore Super Capacity 3.5 model # 970-c 45072-00 is not completing the drain cycle. What do I do to fix this?


You might want to check the plumbing in the bottom of the machine for clogs. On most modern washers, the spin cycle will not start if the water is not completely drained or doesn't drain fast enough. I had a similar problem and found a there was a rubber fitting with a plastic cup inside that serves as a trap to prevent debris from entering the pump. It had a piece of scotchbrite, forty cents worth of change and a hairpin stuck in it.

Sep 29, 2009 | Kenmore 3.5 cu. ft. Front Load Electric...

1 Answer

Kenmore series 80 washer leaking.


about the #1 leak on ken more/whirlpool washers are the pump.it is in the frount middle.you can dry up around washer and slide news paper under it then run load.that will narrow your surch area unless just over filling thats another matter.God bless,tom

Jan 03, 2009 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal DeAngelo

Level 3 Expert

2248 Answers

fordexpert

Level 3 Expert

5537 Answers

 Brian Main
Brian Main

Level 3 Expert

464 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...