Question about Radio Communications
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
danval, I looked up a pic of your scanner and it is pretty straightforward. If it is the 16 channel I was looking at, here is the step by step programming.
1- Push manual button to go to the channel you want to start programming.
2- Enter the freq number in.
3- Push the E button to enter it in the memory.
4- To review what you programmed, push the Review button.
5- Use manual button to step to next channel and start over from #2
That should get you started with the scanning hobby.
The scanner has a Priority button that when activated will stop scanning and go immediatly to the priority channel if someone keys their mic.
If you need freq's (or more of) for your area, go here and click on your state and county and it'll give you a complete listing.
Hope this helps you out, let us know,, Mechanic
Posted on Feb 12, 2008
I can't locate information specific to the 210XW, but hopefully this generic Bearcat programming info will help:
1. Press the MANUAL key to advance to the channel that you wish to reprogram.
2. Enter the new frequency, including decimal point.
3. Press the ENTER or E key.
4. Start over with step one to continue programming channels.
Posted on Aug 16, 2009
I've been unable to locate a manual for this old 16-channel scanner, but programming should work like this:
1. Turn the scanner ON
2. Press MANUAL to stop scanning
3. Press MANUAL repeated ly to advance to the desired channel (or enter the channel number followed by MANUAL)
4. Enter the desired frequency, including decimal point
5. Press E to enter and save
6. Back to number 3
For a comprehensive database of active frequencies in your area, visit
Posted on Dec 12, 2009
You can try a system reset (press and hold 2,9, and MANUAL while powering up), but chances are that the display is shot. You can try a local repair shop if you have one that you trust, but I recommend contacting the service folks at Uniden.com for a price quote on repairs.
Posted on Jan 03, 2010
Tips for a great answer:
Apr 23, 2017 | Uniden Radio Communications
May 07, 2014 | Uniden Radio Communications
Jan 04, 2014 | Radio Communications
Oct 28, 2012 | Uniden Radio Communications
Jun 06, 2011 | Audio Players & Recorders
Dec 01, 2010 | Uniden BC-95 XLT Scanner
25 people viewed this question
Usually answered in minutes!