Question about Nikon D100 Digital Camera

1 Answer

How do i reset d100 to factory specs - Nikon D100 Digital Camera

Posted by Anonymous on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Nikon Expert
  • 197 Answers

The D-90 and D-100 are similar so this may work for you. On my D-90, you go to the menu, then click on the little pencil Icon. The top line will read: Reset Custom settings." Click on this line then click "yes" to reset all custom settings back to default. You can also reset individual settings back to default by clicking on the line for the specific setting you want to reset.

In addition, on the top right side of the camera you will find a "+/-" button and an "AF" button. Both are marked by little green dots. Press these two buttons simultaneously for several seconds and it will reset most of the custom settings back to default.

Posted on Jun 27, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ETrex Venture HC Car GPS Receiver: How do reset unit back to factory spec's...


Hi!

From your owner's manual, to reset to factory defaults (Page 34)
http://www8.garmin.com/manuals/eTrexVenture_OwnersManual.pdf

Select the route page options button and press the Thumb Stick in to access the options menu.
Select "Restore Defaults" and then press in on the Thumb Stick to restore factory settings.
Hope this is of some help to you.
Good Luck!


May 07, 2010 | Garmin eTrex Venture HC GPS Receiver

1 Answer

Won't stay in manual mode


Go to your menu settings and find the setting all to default, menu reset, or factory settings, or something like that.This will reset all settings back to the way it was from the factory or default. Then you can set what you want. Different modes will have an effect on your settings and can change according to what is set.
At this point it is a good idea to read your user manual or you can go to this link: Menu Reset Nikon D100 This camera has two banks of memory, remember that as well.

Nov 09, 2009 | Nikon D100 Digital Camera

1 Answer

Reset to factory specs for blackberry curve 8330


Hi,

how to reset the Curve back to factory state (a complete wipe-out). Please note if you just want to reboot the device, you only need to take out the battery.

To reset the phone back to factory state:
Go to Options -> Security Options -> General Settings
Press the BlackBerry Menu key and select "Wipe Handheld" and type in "blackberry"

Thanks.

Jun 04, 2009 | RIM BlackBerry? Curve 8330 Cellular Phone

1 Answer

Need to reset unit to factory specs


Called up the AVmap site online and the answer was right on their website.

May 01, 2009 | GPS

1 Answer

Nikon D100: suddenly all the pictures are black


Ellen,
When shooting with the D100 do you have the dial on top of camera set to 'Auto'? If so, then most likely you have some how adjusted to the exposure compensation, so your photos are underexposing.
To reset your camera to the factory default settings:
Hold down the bracket and flash button for two
seconds.
These are the buttons marked with a green dot
Take a test photo and see if that works.

Mar 18, 2009 | Nikon D100 Digital Camera

1 Answer

D100 shows small spot on pictures


Sounds like a spec of dust on your low-pass filter in front of the CCD in the camera. You could bring it to a shop for cleaning (probably about $30) or buy Nikon's EH-5 AC adapter that will allow you to lock up the mirror and expose the filter behind it and blow it off with some canned air. Should be regular maintenance if you use the camera regularly. Good reason to limit the amount of time the lens is off the camera body.

Nov 04, 2008 | Nikon D100 Digital Camera

1 Answer

Nikon d100 locked


Have you tried to reset the camera? I seen this a few times .. and the camera reset did the trick. I've never heard of the motor noise though.

Oct 20, 2008 | Nikon D100 Digital Camera

1 Answer

How to reset to factory specs??


Enter the SETUP menu and select RESET. You'll be prompted to reset two sections. Answer YES to both and everything that can be set to default will go back to the factory default state.

Jan 13, 2008 | Panasonic Lumix DMC-TZ1 Digital Camera

Not finding what you are looking for?
Nikon D100 Digital Camera Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Ric Donato

Level 2 Expert

225 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...