Question about Belling Solitaire G755 Gas Kitchen Range

1 Answer

Belling G755 Cooker oven wont stay lit

I have the same problem, i press the oven knob in and light the oven, as soon as i let go the oven goes out. I held it for 5 mins last night and it still went out. Can anyone tell me why ????

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I'll give this a go! With a cooker like this, you depress and then turn the control knob, press the ignition button and continue to depress the control knob for a few seconds. This is because a device called a thermocouple is heated by the flame and you have to continue to depress the control knob so that sufficient gas flows to heat up the thermocouple. If the thermocouple does not get hot or stay hot then the gas valve is automatically closed - stopping the gas. The thermocouple is a 'flame failure' safety device. If the gas gets cut off then the flame goes out and the thermocouple goes cold switching off the gas valve automatically. However, you are having to try and manually keep the gas going for a good five minutes. I would think that there is either a problem with the thermocouple or the gas control valve! Tony www.birminghamelectricsltd.com

Posted on Oct 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oven lights but then flame goes out as soon as I release the knob


The flame sensor seems to be bad.

When I light my pilot light, it stays on till I release the button ...

askville.amazon.com > Home > Home Improvement
Mar 18, 2008 - Similar Questions: light pilot stays till release button suggestions ... If you have held it for a long time and it still won't stay lit, then your thermocouple is bad.... the gas valve doesn't think a flame is burning the gas coming out of the pilot ... less likely but somewhat common is the gasvalve... if the knob you are ...

Troubleshooting Gas Range and Oven Problems ' Back ...

blog.etundra.com > Tundra's Tech Talk

Dec 15, 2015 | Fisher Paykel Fisher & Paykel 24-in...

1 Answer

Oven wont stay lit


If you are talking about the little flame that is supposed to be burning at all times then you need to go to a hardware store and purchase a thermocouple. It is a small copper tube that sense's the flame. When working it will constantly burn a pilot flame so that when you turn on the oven it will ignite the gas in the burner. Once the burner is lit it will stay lit until the oven reaches the desired temperature. Replace the THERMOCOUPLE.

Sep 09, 2011 | Belling Solitaire G755 Gas Kitchen Range

1 Answer

I have a belling gas range cooker and only one of the ovens lights properly. The other one when I turn the cooker knob and hold it the gas comes through,it lights but as soon as I take my finger off the...


When the oven lighting mechanism lights the gas, the flames heat a temperature sensor that, once hot, increases the pressure in the sensor's copper pipe and opens a safety valve to allow gas to continue to flow without you holding down the button (It's made like this so, if your flame gets blown out, the sensor cools and cuts off the gas supply, making it safe from gas leaks). These sensors occasionally fail, and very sensibly "Fail safe" - No pressure in the sensor pipe, the valve won't stay open and there is no gas to the burner once you release the button.
If you take a look inside the oven at the back where the burner is, you will see the sensor, usually the bit that is in the flame is cylindrical, about an inch long made of metal about 3 or 4 mm thick, tapering at the end. It will be held in place by a nut that fits on a thread at the base of the sensor. Running from the sensor is a copper pipe that runs to the cutoff valve. Unbolt the sensor and withdraw it from the hole it is mounted in, trace the copper pipe back to the valve (where it is usually screwed into the valve with a 10mm connector that looks like a car brake pipe connector. Unbolt from the valve. These sensors are widely used on most gas appliances (Boilers, gas fires, cooker hob burners and patio heaters all use the same kind of sensor). You should be able to get a replacement from any gas appliance service agent. If you go into a shop, take it with you. The only thing you need to do is make sure the replacement you get is long enough. If you are offered one that is slightly longer, that

Jul 22, 2011 | Belling FarmHouse 931 Gas Kitchen Range

1 Answer

My electrolux oven won't stay lit


Right above your pilot light, there is a little temperature probe. It either needs to be cleaned, replaced, or adjusted closer to the top of the pilot flame. Hope this helps. Good luck!

Nov 07, 2009 | Cars & Trucks

2 Answers

Oven won't stay lit


gas oven ignites and lights then flame goes out

Jun 17, 2009 | Belling Solitaire G755 Gas Kitchen Range

1 Answer

The oven on my gas cooker will light but wont stay lit


Thermo coupling needs changing, unless you are Gas Safe, let someone else repair for you, its a common problem, shouldn't cost much, good luck , the Yeti

May 20, 2009 | Miele 20 in. KM405 Gas Cooktop

Not finding what you are looking for?
Belling Solitaire G755 Gas Kitchen Range Logo

2,648 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belling Kitchen Ranges Experts

paulcarew

Level 3 Expert

2514 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Mike Carew

Level 3 Expert

969 Answers

Are you a Belling Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...