Hello, I'm the unfortunate owner of an Acer N311 PDA. This is a wonderful PalmTop, but since some time, it's impossible to connect it to my Toshiba Tecra A8-143, because it isn't recognized as peripheral. The OS states that there are no drivers for it. Where can I download the drivers from? Thank you: Aldo Villa
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello, cleme_z. I would be happy to help! Unfortunately, I too have had this issue with a pda of mine (not the same brand as yours), and the reason why my pda did this (and probably why your tungsten is doing this) is because your touch screen is broken. You screen cannot recognize nor truly feel touches, so your pda is stuck in "tap center of target mode," waiting for a response from your touch screen. The best thing to do is to contact the manufacture and tell theme about this issue. They might even allow you to send them your pda and replace it for free if they discover that you might have a slightly defective screen. I hope this helps! If you have any other questions, please ask!
If both of your battery sets have gone flat then you have lost all of your information
For your friend to have all of her info in place when she changed the batteries, the backup battery must have been OK which would have saved the info stored.
I would suggest when you use your psion to then back everything to a pc using psiwin 1.1
It's free to download from the internet.
I assume that your sound is turned on and the volume is turned up. Try earphones. If they work the speaker is possibly damaged or the jack plug connections are bad. If they don't, the amp section is possibly damaged.
I have the same problem with the device, mine is a N311, the problem always hapenes if I turn of the cradle while the device is on it. Nothing can help solving the problem other than taking the device out, put it on the USB key without the battery, perform a hard reset and then put the battery in. Of course, you loose all your settings and intalled applications It sucks,.
hi. the question is, which ROM version do you use. just go to settings and choose about... there you can find info about the current ROM. look for the last two numbers (they should be between 16 and 24 which is the latest and stable version) here is the short guide how to proceed with the update an here you can download mentioned ROM. I advise you not to restore your device afterwards, it won't work!
First of all please inform me if the pda displays ONLY a white screen. Are there any characters on the screen or something like this? Does a soft-reset or a hardreset helps solving this problem ?(please try these first).
I will be able to assist you better if I know the answers to these questions. If you need more informations on how to do hard/soft resets please inform me. You may also find these informations in your device's user manual.
Good luck and please reply with more informations.