Question about Toshiba e-Studio 35 Copier
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Toshiba eStudio 2500c - CA00
This is a pretty complicated issue/problem. there are 5 pages devoted to this issue in the service manual. This issue would be best handled by a technician. but you could try the following....
[CA00] Color registration abnormality
<Color toner low density>
Turn on the copier holding down 0 and 8 and wait till it boots up into its service mode..then enter code 2692 “Prevention of color toner low density / change the zero to 1.
Then change code 2693 “Prevention of color toner low density / Judged number of sheets setting” value to 40 (default 20).
Make sure you have cleaned the main charge units by fully extending the rods with the green handles for each color.(open the front door) and use the plastic wand attached to the front door to clean the laser glass for each color..there is a small **** under each color unit to slid the wand into..felt side down on the wand.
Like I said there are several other complicated ways of fixing this.
Posted on Jan 16, 2010
Check the developer drive gear,
behind the mother board,,,view the two clutch left side clutch is developer drive clutch, open & check the gear.
Posted on Apr 04, 2014
Tips for a great answer:
Aug 27, 2015 | Toshiba EStudio 223 Copiers
Apr 04, 2014 | Toshiba e-Studio 350 Copier
Dec 01, 2013 | Toshiba e-Studio163 Copier
Sep 16, 2012 | Toshiba E-Studio167 Copier
Sep 12, 2011 | Toshiba e-Studio 350 Copier
Jan 19, 2010 | Toshiba Estudio 200L Copier
41 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: