How do I program my admiral tv without the remote

tryo 10464 10466 10469

Code 001 for Admiral TV Code 046 for Admiral TV Code 047 for Admiral TV Code 083 for Admiral TV Code 095 for Admiral TV Code 173 for Admiral TV Code 191 for Admiral TV Try these if these won't work add a 1 in front of these codes to make it a 4 digit code and this should get you going. Good Luck

Most universal remotes work the same. Try this.
Here you go. This will work with most all universal remote controls. If you don't have the code do the following:
Automatic Programming
With automatic programming, the remote control tests all the codes available on the Code List and assigns the correct code for the selected device. Although this method can be more time-consuming, it eliminates the need to look up codes and enter them manually.

1. Turn off the device with which you want to use the remote control.

2. Press and hold the corresponding button on the remote control
(TV, VCR, SAT, DVD, CAB or AUD) until POWER INDICATOR illuminates. It should take a couple of seconds for the light to remain solid. The remote control is in programming mode.

3. Press and release power button. The POWER INDICATOR flashes once and stays on indicating the unit is in Power Scan mode.

4. Press CHANNEL up or CHANNEL down repeatedly until the device turns on.

5. When the device turns on, press OK to store the code.

Note:
• To exit without storing the code, press BACK.
• T he unit will search for the next code or the previous code if you press
CHANNEL up or CHANNEL down after the device turns on. (go slow you need to press OK when the TV turns on) if you mess up turn TV off and start over.
6. Press any other button. If the device responds, the remote control has been programmed. If the device does not respond, repeat steps 2-5.

Fill free to ask me questions about anything..........................

I can help you to program your One For All Big Easy URC-3220 Universal Remote to control your Admiral TV.



Please review my Fixya Tip posts for:

1. Searching for the proper codes, or
2. Downloading the URC-3220 users manual / owners guide. This contains all the codes for the brands of devices your remote can control.
   

I hope that helps.

I need code for rca mts stereo,and how to set it. Thanks Friends

i have a admiral tv and i'm wanting to program my remote that goes to my converder box to the tv is there anyway i can do that?

Asked someone else who knew the three numbers to program my tv.
FOR FREE!

I see it's been awhile. Did you get it programmed?

YOU CAN USE EMERSON CODES FOR YOUR ADMIRAL TV AND TV / VCR COMBOS, MY COMCAST REMOTE ACCEPTED 11911. SOME REMOTES NEED FIVE NUMBERS AND MY ADMIRAL ONLY HAS THREE. SO I USED AN EMERSON CODE AND IT WORKED MOST OF THE BELLS, NOT ALL WHISTLES WORKED BUT I DIDN'T HAVE TO GET UP TO TURN IT ON, CHANGE THE CHANNEL OR THE VOLUME. MY KIDS WON'T DO IT ANY MORE!!
GOOD LUCK!!!!!