Question about Kenwood Car Audio & Video

Open Question

No power plug for kenwood kac-820

Do you know what pins is what

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 631 Answers

SOURCE: kenwood KAC-PS201T

The first thing you must do is to confirm that you have voltage at the amp. Just because the fuses look good, that doesn't mean you're getting power to the amp.

With your multimeter set to DC volts, the black meter lead on the ground terminal of the amp and the head unit on (so the amp will have remote voltage applied), touch the red lead alternately to the B+ and remote terminals of the amp. If the voltage is below ~11 volts, you need to check the wiring feeding whichever line is too low.

Posted on Jan 22, 2008

Ad

SOURCE: WIRING MANUAL

tough ****

Posted on Mar 31, 2008

  • 5 Answers

SOURCE: Kenwood KAC-8103D Power Amplifier wont turn on

it sounds to me like its burnt.but with some amps the screws that hold it in place have to be screwed into the car chassisfor grounding. be careful not to srewe into hidden wires.

Posted on Apr 15, 2009

etirbynnor
  • 655 Answers

SOURCE: To bridge a Kenwood KAC-9102D

Hello laurogleal,

The Kenwood KAC-9102D is a mono amp. There is no bridging. Having two sets of terminals is just a more convenient way of connecting two subwoofers. The amp is stable down to 2 ohms impedance, so it is safe to run 2 4 ohm loads in parallel.

Hope this helps.

Posted on Apr 28, 2009

wikkidd420
  • 96 Answers

SOURCE: want to bridge my subs I have a kenwood kac-719

from what i have read about your amp, it is already a mono amp, and rated for 2 ohm's, so all you have to do is wire the subs in parallel (both positives together to positive and both negatives together to negative) or series/parallel if you have dual voice coils (both positive and both negative paired on each sub, then positive from amp to positive on one sub; negative on that sub to positive on next sub; then negative on sub to negative on amp) Note though, with two dual voice coil subs, you can have a 1 ohm load with the first set up, which can damage your amp. Let me know if this helps :)

Posted on Jun 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Asking for pin number we don't know the pin number


Most of the time the pin is on a card delivered with the device. Or in the manual you can fine a generic pin to start. With a generic pin (often 0000) you are advised to change the pin during setup.

Jan 12, 2015 | Roku Streaming Stick HDMI Version

1 Answer

I dont know my pin and i never put one in


You cannot change the pin unless you have the current pin. If you have never entered a pin before then someone might have entered a pin as a joke on you. You could try and ask your 'friends?'

Feb 17, 2014 | Samsung Galaxy Tab Tablet PC

1 Answer

Need a new power supply for a soyo mother board Crown model fp-


All you need to know is if your motherboard has a 24-pin or 20-pin power connector. You can just count the pins if you don't know. There connector is located on the motherboard. It looks like this: moondogwst75_3.jpg

So if it's a 24-pin, order a 24-pin power supply. If it's 20-pin, order 20-pin. Hope this helps!

Aug 28, 2011 | Computers & Internet

1 Answer

I wan to know my atm pin number


There is no way I can pluck this out of thin air.
You need to contact your bank and get them to reset your ATM pin number, then you need to change it straight away so you are the only one that knows your PIN number.
Record your PIN number and keep it in a safe place, if someone knows your PIN they can empty your bank account.

Nov 18, 2010 | Computers & Internet

1 Answer

How can i know the pin # of 8100


Go to options, status, and your pin should be there.

Apr 30, 2009 | RIM BlackBerry Pearl 8100

1 Answer

Dont Know My Pin 4 My New Sony Errcison G502?


pin generally is in your sim not in your phone.
if you put correcltly your sim pin and the phone request his own pin , well strange because new phones dont have activated the pin in request.
anyway look in your phone manual haw is the prefrabicated pin from the company. if you dont have the manual go to the sony ericson website and download your phone model manual.

Apr 05, 2009 | Sony Ericsson G502 Cellular Phone

1 Answer

I don't know the pin number to my bluetooth HBM-730


Are you trying to pair these two devices? In that case enter any number as your PIN when prompted and enter the exact number in the other device when it asks for. PIN number is asked when you try to pair two or more bluetooth devices. PIN can be any number but make sure you enter the same number in all devices.
I hope it helped.

Feb 10, 2009 | Cell Phones

1 Answer

Gigaset 8825 cordless phone pin reset


The default PIN for base and handsets is 0000 - if it has not been changed
  • Press Menu on Handset
  • Scroll to Mobile Settings - press ok
  • Scroll to Local Settings - press ok
  • Scroll to Chang Pin - press ok
  • Enter Current handset PIN - press ok
  • Enter New PIN - press ok
  • Display will show Confirm - Reenter PIN - press ok

Sep 15, 2008 | Siemens Gigaset 8825 Cordless Phone

1 Answer

Soundstream ribcom500


You can get the schematic from SoundStream. If you get the schematic and need help, email it to me at:
babin_perry@yahoo.com

If the amplifier does nothing, post the DC voltage on each of the pins of the SG3525 (or whatever IC they're using in the supply). Use this as a template:

Pin 1:
Pin 2:
Pin 3:
Pin 4:
Pin 5:
Pin 6:
Pin 7:
Pin 8:
Pin 9:
Pin 10:
Pin 11:
Pin 12:
Pin 13:
Pin 14:
Pin 15:
Pin 16:

Nov 07, 2007 | Soundstream Davinici Car Audio Amplifier

2 Answers

I need reset pin number


To reset your pin on your base station, you push Menu, scroll to System Settings, DON'T PUSH SELECT, push * 6 5 # That will reset the pin.

Aug 17, 2007 | Siemens Gigaset 8825 Cordless Phone

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4861 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...