Reconnecting hoses i took unit apart and did not make a diagram of how too reconnectt hoses

Here is the Service Guide. Plumbing Guide is on Page 22.

https://evacuumstore.com/images/proheat-2x-service-guide.pdf

..

Hi, it's Ambrai from Crucial Vacuum.

I have inserted a link that will direct you to your ProHeat's User Guide: http://www.bissell.com/assets/0/132/134/228/37c9e5f4-f551-4b35-917f-33c0e7055ea9.pdf

I hope this was helpful. If you would like further assistance, please feel free to give us a call at 877.750.9239. We have helpful and friendly customer care representatives on the line ready to assist you.

Ambrai Brown
Crucial Vacuum Customer Care
http://www.crucialvacuum.com

Found a diagram at http://www.svcvacuum.com/bissell/8806_88061_parts.htm
A bit fuzzy, but it might help. Has parts list with it.

Great.

Just what the doctor ordered:

http://c.managemyhome.com/mmh/answers/Answers.action#l4q145526

This is not my website, you should thank the guy that made this. It took me a few days of searching to find it.

Hi,

Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.

Bissell Proheat Upright Wet/Dry Vacuum Problems

heatman101
jkkj

http://c.managemyhome.com/mmh/answers/Answers.action#l4q145526

my husband took it apart today and the impellers were gunked up with black stuff.

he used these pictures that someone else generously posted. ours was slightly different in internal design, but they are helpful regardless.

here is an exploded diagram of the 5903, 04, etc. it will help you see if any parts are missing or broken.

http://www.vacuumcleanershop.com/images/Hoover/F5903-900.GIF

parts list if you need some:

http://www.vacuumcleanershop.com/hvrmdlf5903.htm
it's working fine now. sucks much better too. what a difference!

guess for the $179 these things avg, they just need annual maintenance. I wouldn't pay someone to do it though.

First - press the circuit breaker button.
If no luck:
1. Make sure you have connected it properly (see diagram here)
2. If you connected it right - try bypassing circuit breaker.
3. Still does not work - make sure the connectors are reconnected properly.

This should take care of the problem.

Boy, it's been awhile since I took one of these hoses off, but I think at least one of those plastic hose guide things has to come off in order to remove the hose. Those screws that look like they cannot be removed are probably torx screws which need a T20 torx scredriver that you can get at any hardware store. That is the most common size torx screw that Eureka uses.

Here is a link to the owner's manual in case you need any diagrams for getting the clear tubes off:
http://www.eureka.com/service/manuals/70750.pdf

Hope this helps. :-)