Question about RCA HD61W66 61" Projection HDTV

Open Question

I hit power button an light flashes 3 times and will not turn on

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Slinteriors
  • 8617 Answers

SOURCE: tv wont turn on, RCA D56w20, 56" rear prjection

replace the flyback 259296 and the CP150 capacitor. You can get the replacement parts with free instructions at the following link.
http://servicemanuals.vstore.ca/

Posted on May 17, 2009

Slinteriors
  • 8617 Answers

SOURCE: RCA 52inch HDTV (2004 model) green power light flashes 3 times

Replace the flyback 259296 and the cp150 You can get the aprts with detailed instruction on how to do the repair at the following link.
http://servicemanuals.vstore.ca/

Posted on Jun 24, 2009

Slinteriors
  • 8617 Answers

SOURCE: Green light flashes 3 times, but never powers on.

Most probable cause is the CP150 and the CP120 and CP114 capacitors. You can get the replacement capacitors with instructions at the following link under RCA parts category.
http://servicemanuals.vstore.ca/

Posted on Jul 06, 2009

Slinteriors
  • 8617 Answers

SOURCE: power light flashes 3 times

You can get the CP150, CP120 and Cp114 repair kit at the following link which will usually repair that issue. Its at the bottom of the page under the RCA repair kits. The kit contains the capacitors and detailed instructions how to do the repair. www.tvrepairworld.com

Posted on Sep 11, 2009

Slinteriors
  • 8617 Answers

SOURCE: power button flashes three times then goes off

The repair kit called CP150, CP120 and CP114 from www.tvrepairworld.com should repair that issue. The kit contains the capacitors and the CD with detailed instructions

Posted on Dec 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chair won't move..lights flash continuously


You may have locked it by holding the power button . try turning it on then hit thee horn 2 times . That should unlock it.

Jul 16, 2014 | Jet 3 Ultra Power Chair

1 Answer

PS3 wont power up


try another outlet if the light still will not turn green you will need to contact sony,
if the light does turn green let me know and we will get this fixed

Dec 24, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

Can set up th remote control for this tv with the direct tv cable remote


Here's how to scan for TV codes on your DIRECTV remote

1.Make sure your TV is turned on.

2.Slide the mode switch at top of remote to "TV".

3.Press and hold the MUTE button. This is located above the number 1 button.

4.While still holding down MUTE, press and hold the SELECT button until green light at the top of the remote flashes twice.

5.Then enter 991, the green light on remote should flash twice.

5b. Press 1 again (it will flash twice again), then you press the power on button at the very top right.

6.Point remote at TV and press CHANNEL UP button. Tap the CHANNEL UP button repeatedly until the TV powers off.

*If you hit channel up very fast, you risk going past the code. Pressing channel down will back it up. I alway hit channel up very fast till the tv turns off, then back it up slowly till it comes back on.

7.When the TV powers off, press and release the SELECT button.

*Note: If the green light flashes three times before TV responds, then all codes have been cycled through. Our remote controls are guaranteed to program to your DIRECTV receiver, however your TV may not be compatible with our remote control.

Mar 05, 2011 | Curtis LCD2425A TV

1 Answer

Error#5100 comes on my printer and printer stopes


5100 is a carriage error, check the timing strip for contamination(plastic strip about 1/4" in width)
The unit is not homing, check for obstructions[hitting resume button with power for me]

Reset the printers

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

here is the link for other printers: http://www.cyber-ink.com/member-canon.html

Aug 18, 2010 | Canon Office Equipment & Supplies

1 Answer

My ps3 power wont turn on at all? i hit the switch but???


man i dont know what to tell you but to change your hard drive and and or get a new ps3 dude

Jun 16, 2009 | Sony Playstation 3 (PS3) Console

1 Answer

On Canon S9000 A3 inkjet printer error light flashing to indicate 'waste ink tank nearly full'. Can I fix this myself?


1. Turn off power.
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let the
Resume button go.
4. Press Resume button 2 times then let both
buttons go.
5. Green light will flash then stop blinking.
6. When Green light is solid, press Resume button
4 times.
7. Press the power button and the printer should turn off. If not, press the Power button 1 more time.
8. Done.

Dec 04, 2008 | Office Equipment & Supplies

1 Answer

Flashing lights


Canon IP 2000 / reset
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..

Aug 26, 2008 | Canon PIXMA iP2000 InkJet Printer

2 Answers

Sony KDP-65WS550 flashes when you try to turn it on


No the DLP units can flash more than 8 times. 9 blinks mean Zero Crossing detector which means diode number D6166 or D6114 is open they are on the A board.Let me know if you need any further info.

Feb 23, 2008 | Televison & Video

1 Answer

Pover up trouble


sounds like something is drawing down on your 12 volt supply drives or on board regulators. Try it without the drives connectged, and see if you can get the system to boot up(you'll just get a notice that your drives are unavailable, but you'll already know that, right?

got backup for your Dell?

Feb 15, 2008 | Dell Dimension 5100 (D51L1) PC Desktop

1 Answer

Won't turn on...


It's possible that the convergence IC's may be bad in this set along with a few resistors. A TV repair shop should be able to fix the set for you.

Dec 19, 2006 | Samsung HCN4226W 42" Rear Projection...

Not finding what you are looking for?
RCA HD61W66 61" Projection HDTV Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73698 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...