Question about Kyocera FS-1118MFP Laser Printer

1 Answer

HOW REMOVE IT FROM THIS Defective power supply ERROR

WE NEED THE CODE NUMBER TO REMOVE IT FROM THIS C6400 ERROR

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

Reset C6400 ERROR
turn the power switch off and open the front cover.
Then, turn the power switch on and press the system menu/counter key to enter the maintenance mode.
Select Service setting using
the up/down cursor keys.
While pressing the start key and the # key,
press the enter key..........Maintenance mode is entered.
Select Maintenance mode using
the up/down cursor keys.
Press the enter key.
Enter the maintenance item
number U163 using the up/down keys.
Press the enter key.
Select Execute using the up/down cursor keys.
Press the enter key. The fusing problem data is initialized.

Posted on May 03, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: KYOCERA KM-1820 COPIER

follw these steps, it should work
turn off copier.
open top toner cover.
turn copier back on.
when you see message "close top cover" press "system menu" button.
scroll up to "service setting" then press the # button, green "start" button and the "enter" button all at the same time.
then scroll down to "maint mode"
press "enter"
then enter 163
press" enter "
turn off copier then turn back on
close toner cover

you should be back in business

Posted on Jun 12, 2008

xptareq2000
  • 1447 Answers

SOURCE: call service c6400

it is the problem fuser unite heater lamp or thermostater

Posted on Jul 14, 2009

  • 683 Answers

SOURCE: kyocera km 1820 error code c6400 how to fix it??

http://www.fixya.com/support/t6139506-kyocera_km1820_displays_error_code_c6400

Posted on Dec 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I fix the error c6400 on kyocera taskalfa 221?


Hi
I found this explanation of your error, although my understanding of it is not entirely clear.
Code: C6400
Description: Zero-cross signal error
Interrupt of the zero-cross signal does not occur more than 1 s.
Causes: Poor contact in the connector terminals.
Defective power source PWB.
Defective engine PWB
You can find this here:
Error Codes Kyocera Mita TASKalfa 221 Code C6400
and also by changing the drop down menus along the top of the page you can view other errors for your machine and for other models and makes. You can also use the link to get a Service Manual for your machine.
Hope this is helpful, if so would you please register that with Fixya
Cheers

Dec 17, 2014 | Kyocera Office Equipment & Supplies

2 Answers

C6400


C6400 Zero-crossing signal problem
• The engine PWB does not detect the
zero-crossing signal for the time
specified below.
At power-on: 3 s
Others: 5 s

Causes: Poor contact in the connector terminals.
Remarks: Check the connection of connectors YC7
on the engine PWB and YC2 on the power
supply PWB, and the continuity across the
connector terminals. Repair or replace if
necessary.

Causes: Defective power supply PWB.
Remarks: Check if the zero-crossing signal is output
from YC2-11 on the power supply PWB. If
not, replace the power supply PWB.

Causes: Defective engine PWB.
Remarks: Replace the engine PWB if C6400 is detected
while YC2-11 on the power supply
PWB outputs the zero-crossing signal.

Feb 04, 2011 | Kyocera Copystar CS-1820 Black and White...

1 Answer

C6400 error problem of kyocera printer


C6400

Contents: Zero-crossing signal problem
• The engine PWB does not detect the zero-crossing signal for the time
specified below.
At power-on: 3 s
Others: 5 s

Causes: Poor contact in the connector terminals.
Check procedures/corrective measures: Check the connection of connectors YC7
on the engine PWB and YC2 on the power
supply PWB, and the continuity across the
connector terminals. Repair or replace if
necessary.

Causes: Defective power supply PWB.
Check procedures/corrective measures: Check if the zero-crossing signal is output
from YC2-11 on the power supply PWB. If
not, replace the power supply PWB.

Causes: Defective engine PWB.
Check procedures/corrective measures: Replace the engine PWB if C6400 is detected
while YC2-11 on the power supply
PWB outputs the zero-crossing signal.

Dec 17, 2010 | Kyocera FS-1118MFP Laser Printer

1 Answer

My kyocera km1820 displays error code c6400


Zero-crossing signal problem
• The engine PWB does not detect the
zero-crossing signal for the time
specified below.
At power-on: 3 s
Others: 5 s

Causes:
- Poor contact in the connector terminals.
- Defective power supply PWB.
- Defective engine PWB.

Check procedures/corrective measures:
- Check the connection of connectors YC7
on the engine PWB and YC2 on the power
supply PWB, and the continuity across the
connector terminals. Repair or replace if
necessary.
- Check if the zero-crossing signal is output
from YC2-11 on the power supply PWB. If
not, replace the power supply PWB.
- Replace the engine PWB if C6400 is detected
while YC2-11 on the power supply
PWB outputs the zero-crossing signal.

Sep 24, 2010 | Kyocera Copystar CS-1820 Black and White...

1 Answer

Kyocera FS1118, error code C6400, how do I resolve This?


Hi

Error C6400 appears in Kyocera FS118 when Zero crossing signal problem occurs i.e when the engine PWB doesnt detect the zero crossing signal. This can occur due to --

#1 Poor contact in the connector terminals.
#2 Defective power supply PWB.
#3 Defective engine PWB.

To reset it from Mainatince mode turn the power switch off and open the front cover. Now, turn the power switch on and press the system menu/counter key to enter the maintenance mode.

1. Press the enter key. A selection item appears.
2. Select Execute using the up/down cursor keys.
3. Press the enter key. The fusing problem data is initialized. (Four service calls, namely C6000, C6020,
C6050, and C6400 are reset.)
4. After this is complete press the back key. The indication for selecting a maintenance item No. appears.

Daniel Scott

Jun 21, 2010 | Kyocera FS-1118 Printer

2 Answers

My machine still shows the same: call service person c6400. Kindly help me please.


You will have to call a Copystar or Kyocera technician to reset your fuser memory.

Aug 31, 2009 | Kyocera Copystar CS-1820 Black and White...

3 Answers

Showing 'error occured call service person c6400'


Defective power supply board. or Defective engine board

May 31, 2009 | Kyocera FS-1118MFP Laser Printer

1 Answer

6400


Hello, the c6000 is the Fuser heater 1/2 defective --- but is you are getting the c6400 --- is a zero cross signal error which means defective PWB. You must replace the engine PWB or the power source PWB and check for correct operations.

The cheapest route would be to replace the fuser but with the c6400 code I believe you would just be throwing your money away.

Jan 05, 2009 | Kyocera KM-1505 Copier

1 Answer

Problem C6400


it is a zero cross signal error, could be poor conections or power supply faulty or engine board faulty. you will need to get a tech to check it out

Nov 03, 2008 | Kyocera Mita KM-2050 Printer

Not finding what you are looking for?
Kyocera FS-1118MFP Laser Printer Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kyocera Office Equipment & Supplies Experts

Kyocera HP Expert

Level 3 Expert

523 Answers

Chris Schutte

Level 2 Expert

51 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Kyocera Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...