Question about Konica Minolta bizhub Office Equipment & Supplies
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
go to the printers and faxes page and in the driver properties click on printing preferences click on authentcation/account track and you should be able to enter you name and password from there unless you may have to be logged on as the administrator on your computer to make these changes
Posted on Oct 23, 2009
SOURCE: I have a Konica Minolta
Hi, you can print a test page from your computer by doing the following:
- Right click the c450's icon in the Printers folder and choose Properties. - Under the General tab, select either "Print Test" or "Print Test Page."
The test page will print out and you can check the printer's operation.
Posted on Dec 30, 2010
SOURCE: Problem with the Konica Minolta
This code is for LCT (Large Capacity Tray) lock release failure. This means there is a problem with the LCT, usually the large paper drawer at the bottom. This code is usually reset by opening then closing the front door. Sometimes turning off then on the main power switch on the right side will clear it. Try releasing the LCT and get it open. Then check the paper in the tray. Most of the time when there are problems with these LCT's it is because too much paper has been loaded or it has been loaded improperly. If you get it open, remove all paper. Then load smaller amounts of paper at a time to insure that it is loaded perfectly. Only load the tray half full at first and then close the drawer and allow it to lift. Then make a copy from that drawer to be sure it feeds paper. Then release the drawer again and finish loading if you want. If you continue to have the code then you can leave the drawer open an inch or so to de-activate it so you can still use the printer from the other drawers until you can get a technician out ot service it.
Good Luck and Thank You for using Fixya.
Posted on Feb 16, 2011
Tips for a great answer:
Mar 01, 2014 | Konica Minolta Office Equipment & Supplies
May 14, 2013 | Konica Minolta Bizhub C 353, Bizhub...
May 07, 2013 | Konica Minolta bizhub Office Equipment &...
Mar 08, 2012 | Minolta Office Equipment & Supplies
May 10, 2017 | Konica Minolta bizhub C450P Laser Printer
20 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: