Question about Furniture
The Imedics Healthy Massage Chair is an Effleurage 2 (Robotic). It will turn on but can not be operated as Wave Motor Error comes up on the screen. Imedics seem to have gone out of business. I have had an electrican look at it and he tested the motors which seems to be working but he had no idea on the boards. Any help greatly appreciated.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The "NO VIDEO" problem is all too common. It results from overheating of the RSX and/or CELL processor. It is necessary to disassemble the unit apply AS5 compound and shim the heatsinks to ensure proper contact between the heat sink and the processor. I do this for $65.
Posted on Nov 11, 2008
Just had the same problem. Switches and motor checked ok, then found the circuit board on the left hand side of cleaner. The fuse (on the board) looked ok, but when removed and checked for continuity I found it had blown. The problem I have now found is that the fuse cannot be ordered only the complete board. Hope it gets the brush roller going again.
Posted on Jun 01, 2009
Hello, did you check the ground wiring for a bad contact?
I don´t see any other reason why the motor would not run if it works connected directly to the battery and you have 12 Volts supply at the multiplug .
Posted on Jun 25, 2010
SOURCE: My EMS 9 massage chair
The massaging is done by small motors with eccentric weights attached to the shafts. Those motors are controlled thru a very simple control board that in your case appears to have failed.
To fix the chair you will have to access the board and find out why it has failed - at least a basic experience in electronics is required, to perform the tests on the relays and triacs used to control the motors. If you don't posses this experience then all you can do is to check that the power cable, the remote cable and the motors cables that plug in the board are firmly inserted - for everything else you will have to call a pro.
Posted on Sep 14, 2011
Tips for a great answer:
Jun 07, 2016 | Furniture
Aug 10, 2014 | Human Touch STRETCHING HT-270 ROBOTIC...
Dec 02, 2013 | Human Touch Ijoy 100 Robotic Massage Chair...
Oct 22, 2013 | Interactive Health Ijoy 130 Massage Chair
Feb 18, 2013 | Furniture
Sep 09, 2012 | Furniture
Nov 09, 2009 | Human Touch Ijoy 100 Robotic Massage Chair...
Jan 02, 2009 | Interactive Health Ijoy 130 Human Touch...
165 people viewed this question
Usually answered in minutes!