Question about Invicta Subaqua Noma Iii S

Open Question

How to adjust the larger seconds hand at zero mark in cK chronograph.

Please explain how to reset and zero out the larger seconds hand in my cK chronograph. I bought this brand new watch yesterday and its larger seconds hand won't adjust at 12' but stays at 12:01. Your help will be highly appreciated.

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 183 Answers

SOURCE: Have an Invicta Lefty Quartz Chronograph. The

Actually the sweep arm can be set to 0 and will probably have to be every time you have the battery replaced. To set the sweep arm pull the stem and crown out to the first or second set position then press and hold down the start button. The sweep arm will move into position and you can let go of the button when it is where you want it. Make sure to set the right time and replace the crown in the time position.

Great watch!!

Posted on Sep 18, 2009

Ad
radar001
  • 1051 Answers

SOURCE: Invicta Sea Thunder Chronograph resets

Only thing I can suggest is you return it for a new watch. I had so many problems with my Invicta Pro Diver that I finaaly gave up and bought a Timex. Oh and the Timex keeps on tickin' for 1/3 the price.

Posted on Aug 19, 2010

  • 5 Answers

SOURCE: the second hand on my invicta chronograph watch

Easier than you think.
Pull your Crown out to the FIRST stop (were you would normally set your date). Push the "A" button (top chrono button) for your dial at the "3 oclock" area, Push the "B" button(bottom chron button) for the second hand.

Posted on Sep 29, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

The seconds hand doesn't reset to zero when you activate the chronometer with the pusher A and stop it with the same one, you can reset with the pusher B, but it doesn't reset to zero y goes to...


CROWN SETTINGS:
1....... Running position/screwed
2 .......Date correction
3........Time correction

alpug_70.jpg

Procedure to set the mode using Push Buttons

Pusher A: Start/Stop Chronograph
Pusher B: Change to Chronograph mode/ Reset to zero

Note if by pressing button B and it doesn't reset to zero, you can adjust the time by following the procedure below

1. Set crown to position 3
2. Press pusher A to realign second hand
3. Press pusher B to realign counter hand at 6H
Note: For faster hand adjustment, hold pusher for 2 seconds or more

Hope this information will help you!

May 17, 2011 | Technomarine Us Navy NAUT05 Gents Watch

1 Answer

Please clarify use of the 3 smaller dials and how the hands to each are set and reset


The small bottom dial is seconds counter and there is no option to set or reset it as it is part of the main gear train - it just counts the seconds. Top right dial is 1/10 seconds counter and runs only when the chronograph function is engaged. One full circle indicates 1 second. Top left dial is 30 minutes counter and runs only when the chronograph function is engaged. One full circle indicates 30 minutes, two circles = 1 hour. The big centre seconds hand is actually Chronograph hand and runs only when the chrono function is engaged. So, the chronograph hand and two top dials works all together when chrono function is engaged. To start chrono: push upper button once. To stop chrono: push upper button again (once). To return all hands to zero: push lower button once. There is another option: if you already stopped chrono by pushing upper button, but want to continue counting without returning hands to zero, push the upper button once more and the counting will start from the point where it stopped. You can repeat this as many as you wish - it will count on and on, till you will stop it and reset to zero. Fine tuning of chrono hands can be made by pulling the crown half way out and while leaving in this position pushing and holding one of the push buttons (which one - depends on movement caliber). Watch has an tachymeter function as well (big inner ring). Learn how to use it by browsing through my Tips and Tricks- it is explained there. Rate me, please.

Feb 28, 2011 | Calvin Klein K7547107 Celerity Watch for...

1 Answer

Want to use larger second hand and set other to zero. have small one working now and the larger one would work if i pressed the top button on side of watch now it wont do anything if i press button dont...


This watch is a chronograph. The true second hand is the one you mentioned that is currently running (what is called the subdial hand).

To use the chronograph hand,

1) Press the button at the 2:00 location to start timing.
2) Press the button at the 2:00 location to stop timing.
3) Press the button at the 4:00 position to reset the chronograph hand(s) to zero.

To reset the chronograph hands to zero, set the crown to either click position one (usually date setting) or two (usually time setting), and use each button to test which subdial hand it will zero out.

Usually it is the first crown click position, and pressing the 2:00 or 4:00 button to zero out.

Warning: Leaving the chronograph function running will drain your watch battery much faster than using the standard second hand, as it is a complication meant for the purpose of timing an activity or other event.

If this does not zero your watch, you must either send it back to Michele, or visit your nearest Certified Master Horologist to assess the issue, as the movement may have a defect.

Feb 25, 2011 | Michele Coquette 71-800-CL-301-72 Wrist...

3 Answers

Pressing reset doesn't go to zero. sweep second hand goes to 57 seconds


Pull out the crown and use either a combination or one of the cronograph buttons, this will allow you to adjust the hand positions

Nov 20, 2009 | Baume Et Mercier Baume & Mercier Hampton...

1 Answer

The minute counter on my chrono won't reset to zero.


Do as follows:
1) pull out crown and set the hour and minute hands at 6 o'clock (they must be lined perfectly in opposite directions)
2) push the crown in half way back (not completely)
3) push and hold the button at 2 o'clock (set the big seconds hand to zero) and release it when done
4) when big seconds hand is zeroed push the crown back in
5) pull the crown out again and set desired time
6) push the crown back in.
If all actions described do not work, you will have to visit your nearest watch repair shop and ask to refit chronograph hand as in this case it is out of balance (not pointed at exact mark).

Rate me, please.

Jul 30, 2009 | Pulsar 100 Meter Alarm Chronograph PF3277

1 Answer

I can't figure out how to adjust the offset chronograph


This is to adjust the seconds hand or minutes hand for the chronograph. Pull the crown out either one click or two ... depending on the models. Squeeze and hold the top and bottom buttons at the same time (timer stop and reset buttons). Hold down together for 2+ seconds. The chronograph hands should reset by spinning around and stopping at 0. If the don't stop right at zero, you can now adjust where they stop. Leave the crown where it is in that same position out. Press the top chronograph button and hold it down for fast movement or short presses for fine movement to adjust til it stops at the top. This will adjust where the seconds hand stops. Then click the bottom chrono button once. Repeat what you did with the top chrono button and it should allow you to fine tune the position for the next dial, and so on. When you are done, press the crown back in all the way to the normal position.

May 21, 2009 | Invicta Dragon Lupah 2093 Wrist Watch

1 Answer

Resetting stopwatch dials - Armani AR5331


When you reset the big seconds hand to zero, the hour and the minute hand are not engaged in this function, so, there is no fault with the watch movement.
Do as follows:
1) pull out crown and set the hour and minute hands at 6 o'clock (they must be lined perfectly in opposite directions)
2) push the crown in half way back (not completely)
3) push and hold the button at 2 o'clock (set the big seconds hand to zero) and release it when done
4) when big seconds hand is zeroed push the crown back in
5) pull the crown out again and set desired time
6) push the crown back in.
If all actions described do not work, you will have to visit your nearest watch repair shop and ask to refit chronograph hand as in this case it is out of balance (not pointed at exact mark).

Rate me, please.

Apr 03, 2009 | Watches

2 Answers

I have a 1970 locman stainless steel chronograph. when i use the stop watch feature. the second hand does not return to the 12 o'clock position. instead it lands on the 3 o'clock mark. how do i re-set...


I don't know if this is the same for you, but on my watch I can pull the winder all the way out for the time setting and then I hit the start button for the chronograph and it will adjust the second hand. Hope this helps.

Thanks,
Eric Pederson
GVDCOPS

Jan 13, 2009 | Locman 1970 - Black Stainless Steel...

6 Answers

Tag Heuer Aquaracer reset red hand


THANK YOU THANK YOU THANK YOU!!! I had a similar issue and this saved me!!!!

Apr 14, 2008 | Tag Heuer Aquaracer Quartz Chronograph...

3 Answers

Reset Stopwatch Hands on CL1111 ?


Try setting the crown to position 2 - i.e. the position normally used to adjust the date.  Then use the top and bottom stopwatch buttons to adjust the minute hand and 1/10th hand respectively.

Oct 18, 2007 | Tag Heuer Aquaracer Quartz Chronograph...

Not finding what you are looking for?
Invicta Subaqua Noma Iii S Logo

Related Topics:

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top Invicta Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Ansel Alberto
Ansel Alberto

Level 2 Expert

248 Answers

Jimmy Accardi

Level 2 Expert

101 Answers

Are you an Invicta Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...