All the kenwood units have a remote wire and its either blue or blue with a white trace, if you want to test it use a multimeter and not a test lamp as the current output is miliamps and you may damage the unit
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You have used the wrong remote wire to signal your amplifier. swap the blue's around. You are using the Power Antenna remote - which drops out if another source besides TUNER is selected - so the power antenna goes down.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
hey man i have the kenwood kdc mp528 clock adjust is easy. put reciever in stand by mode. hold the menu button for a couple seconds and a menu will pop up. scroll through till you find clk adjst, do you know how to get mp3 player hooked into this?
This is a common mistake. This problem indicates that you are using the solid blue wire from the head unit to the remote turn-on on the amp. This is a power antenna wire that only receives power when on FM radio. You need to replace this with the Blue & White wire from the head unit (power control wire) to your remote turn-on on your amp. This should solve your issue.