Question about Washing Machines
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Feb 28, 2017 | Hotpoint Washing Machines
Mar 17, 2015 | Hotpoint Washing Machines
Aug 11, 2014 | Hotpoint Washing Machines
Please read in full before attempting
p.s. Before working on machine "turn of the
Only carry out if you are confident that you can carry out safely.
Note check small black hose to the air pressure switch is connected,
When machine is turned upside down, the
hose has a tendency to come off.
If unsure call a service engineer.
My machine just had the flashing "door" fault.
On carrying out fault finding checks,
I Found that the main PCB had a built up dust.
This dust was in black lines going between components of the board.
Cleaned around components of the board with a small soft brush.
assembled & tested okay 2 months ago & still working.
Mar 31, 2013 | Hotpoint Aquarius WD640 Front Load...
Dec 28, 2012 | Hotpoint Washing Machines
Dec 29, 2008 | Hotpoint Aquarius WD63 Front Load...
Jul 21, 2018 | IFB Washing Machines
25 people viewed this question
Usually answered in minutes!