Question about Minn Kota Endura 30 Freshwater Transom Mount Trolling Motor

1 Answer

MinnKota Endura 50 Runs only in high speed in forward and reverse

Only high speed forward and reverse work. None of the other speeds work. I have installed a new rotary switch with the same results. I supect I have a problem in the motor fields but can't find a wiring diagram that shows how and where the four wires going to the motor housing are connected in the motor housing. The correct resistance measurement between the wires would be helpful.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 91 Answers

The coil pack is likely bad especially since you changed the switch. call minkota and get the bench tast info (very simple) and then order and replace the coil pack about 26 dollars. be very careful how you put the magnet assembly back together and mark the position of the case on the outside before disassembly. order a new seal kit and use locktite on the shaft again when reassemling to seal the shaft tube for water. dont run motor uout of the water much as it uses the water to cool the shaft and you can damage the seals. good luck.

Posted on May 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Minnkota endura c-50 shear pin size


You can get the appropriate pins in the prop not kits sold by minn Kota or thru major retailers.
Trolling Motor Replacement Props Minn Kota Motors
You will find prop nut kits here just follow the link.

Sep 28, 2014 | Minn Kota MinnKota MK110P Marine Portable...

1 Answer

My minn kota endura 55 is three years old is making a grinding noise when in operation..


I had this problem with my MinnKota Endura 35. The gear teeth that turn the prop are off center and need to be realigned. You need to take it to a service depot as trying to open the casing yourself may do more damage. Plus when it it put back together you need to ensure that it is water tight again.

Cost me around $85 at the local marine mechanic...

May 22, 2011 | Minn Kota Endura 55 42 In Trolling Motor...

2 Answers

How do i put it in high gear?


go to battery compartment, youll see another plug up front by the front of the seat, plug it on and presto! use the pedal along with the throttle and youve got high gear..simple as that.

Apr 10, 2010 | Fisher Price Power Wheels Kawasaki KFX...

1 Answer

Runs fine in reverse, but will not run full speed


make sure the power /speed controll is set on high in both directions yes it can easily be rebuilt i can do it cheaper than most places, i have 30 years experience at fixing air tools - i worked for snap on tools also check and see that the front housing screws are equally tight.

Feb 18, 2010 | Ingersoll Air Tools & Compressors

1 Answer

I just got a minn kota endura 55 and all the forward speeds work but none of the reverse speeds work - were can I get wire diagram or manual or just help to fix this


http://www.minnkotamotors.com/products/trolling_motors/freshwater_transom_mount/endura.aspx

This is the web page for this type of trolling motor. Sounds like they have a good warranty. I would suggest contacting them. If you have forward but no reverse then one of the switches isn't working right and tearing it apart yourself may void the warranty.

Oct 05, 2009 | Boating

1 Answer

No high speed on my TCV 6V ride on car


Try to check the forward terminal connection high speed going to batterry, possible of loose connection.

Dec 15, 2008 | National Kids Mini Cooper Racer Ride On...

1 Answer

Both forward and reverse speed are decreasing


Hi, check the main drive belt, the belt is stretched out. you need too replace the main drive belt.

If this doesn’t work for you, please write back. Thanks,

Nov 23, 2008 | Craftsman Garden

1 Answer

Motor on ly runs on high speed


Hello rhett700, you have crossed a wire connection on the switch or your reostat is shorted/bypassed. If need be contact 'www.minnkotamotors.com/index.asp' ask for ext#406 ask for Dave. Have your model & serial # on hand. He is a good guy. Merry Christmas.

Sep 01, 2008 | Minn Kota Endura 30 Freshwater Transom...

Not finding what you are looking for?
Minn Kota Endura 30 Freshwater Transom Mount Trolling Motor Logo

1,358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minn Kota Boating Experts

Mike Marcotte
Mike Marcotte

Level 2 Expert

76 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

16124 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Minn Kota Boating Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...