Question about Radio Communications

Open Question

Scala rider intercom

Unit does not switch on

Posted by Anonymous on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: my tom tom rider cnt find my cardo scala headset

i have the tom tom rider 2 its a great bit of kit but i disconnected the scala cardo headset for helmets so that i cold try a different bluetooth headset for use in a car and it didnt work i then tryed to recconect it to my tom tom and it cant find it when searching for it what do i do ? what have i done?

Posted on Sep 12, 2009

rockmeister
  • 2047 Answers

SOURCE: I HAVE LOST THE INSTRUCTION

Please find here a link to google search where the first 2 results are for the scala rider headset
http://www.google.com/search?q=scala rider user manual

Posted on Jun 20, 2011

mshe72
  • 1 Answer

SOURCE: the scala rider Q G A won't pair with my I Phone it keeps saying swich your scala on

The scala rider Q G A won't pair with my I Phone 4S it keeps saying nothing

Posted on Dec 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

One headset unit will not switch on?


Check the batteries, they may be dead?

Jul 06, 2016 | Cardo scala-rider Headset

1 Answer

My one set of Scala Rider teamset pro will not let the second set talk to it but the microphone works- any solution?


Do the 2 units pair up when you switch on ? If they do try swapping the units to see if the problem changes from one helmet to the other.
If it does then the problem is with one of the units, if it stays with one helmet then it may be a wiring problem to the speakers.If they dont pairup when you switch on try re-setting the pairing and start again. With the unit turned on, press and hold the CTRL button for 6 seconds till the light flashes red then blue rapidly then press the volume up button for 3 secs, the red/blue should flash 5 times to confirm reset done. Then re pair the units for intercom, switch both units on, when they are flashing slow blue on one unit press the CTRL and Intercom Buttons simultaneously for 6 secs so the red light flashes rapidly, repeat for the 2nd unit, they should both go to a solid red light within a few seconds then slow flash blue to show they have paired for intercom use. If this does not cure the problem you will probably have to send the units for repair.
Hope this helps
Tim

Jul 03, 2014 | Cardo Scala Rider Teamset Pro

1 Answer

Scala rider connects to phone 1 and phone 2 and after 10-15 seconds it shut down


give it back. I also have problems with my Scala rider Q1 system. I would not pay R 200 FOR THIS TYPE OF RECEPTION and i have payed R3000. Bad deal.

Oct 29, 2013 | Scala-Rider Cardo Scala Rider Q1 TeamSet...

1 Answer

The scala rider Q G A won't pair with my I Phone it keeps saying swich your scala on


The scala rider Q G A won't pair with my I Phone 4S it keeps saying nothing

Nov 10, 2012 | Radio Communications

1 Answer

I HAVE LOST THE INSTRUCTION MANUAL & WANT TO USE THE SCALA RIDER WITH MY garmin nuvi sat nav


Please find here a link to google search where the first 2 results are for the scala rider headset
http://www.google.com/search?q=scala rider user manual

Jun 20, 2011 | GPS

5 Answers

My scala rider battery won't hold a charge in standby - typically goes flat in about 8 hours. And I cannot get a reply about it from Cardo


Guys, if you roll out a device that can detect the battery if you own a soldering iron it can be easily replaced by a similar or even greater capacity.

Oct 12, 2009 | Cardo scala-rider Headset

1 Answer

Volume


I had a similar problem when I first connected my Cardo Scala Rider set to the helmet. First off, make sure that the volume on the Zumo is set to 100% for BOTH guidance and mp3 functions. Then click the upper control on the Cado Scala to maximize the volume of the headset. When you've accomplished those two electronic hurdles, adjust the location of the speakers in the helmet - if location of the speakers is not optimized nothing you do with the electronics will have much effect. I typically run the mp3 volume at 20% and the GPS at 50% with the headset volume at halfway. My Cardo Scala unit is a Teamset and I sometimes have problems hearing my rider scream that I'm going too fast. I haven't bothered yet to tell her to keep the microphone closer to her lips.

Aug 07, 2008 | Garmin zumo 550 GPS Receiver

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1646 Answers

Brad Brown

Level 3 Expert

15478 Answers

Mike Charette

Level 3 Expert

1795 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...