Question about Texas Instruments TI-83 Plus Calculator

1 Answer

Texas instruments ti-83 plus. only have black line on screen

Changed all batteries and only shows black line on screen. please help. regents test tomorrow.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Texas Instru... Master
  • 7,993 Answers

Hello,
Reset the calculators memory [2nd][MEM][7:Reset][1:All Ram][2:Reset]
If that does not work

You should reinstall the system which you find here

http://education.ti.com/educationportal/downloadcenter/SoftwareList.do?website=US&tabId=1&paneId=2

Use the link below to install TIConnect software
http://education.ti.com/educationportal/sites/US/productDetail/us_ti_connect.html You can also download the latest OS there.

Install TI connect on your computer and run it to open the main Window. Then connect you calculator to a USB port and, in the TIConnect main window Click the TIDeviceInfo icon. Software will try to retrieve the info. If it does your calculator is fine.

If it tells you Device Not found , Click communication settings in same pop up window where it said Not found, and Select Device, Select Cable, Select Port and Click OK..

If you are lucky and it works, you can reinstall the OS, which can be downloaded from education.ti.com. You drag and drop the OS on the TIconnect main window. Calculator must of couse be connected to computer.

If you have problem with TIconnect, use the calc-to-calc cable to transfer the OS of a working calculator. Yous should be on Receive mode [2nd][Link] --->>Receive. (When both calculators are ready hit enter.) The other calculator, you guessed exactly right, must be on Send [2nd][Link][SEND][G:SendOS]. (When both calculators hit [ENTER])

If all that does not work, then it may be time to head for a place of worship to pray for its resurection, or look for a repair shop.
Hope it helps

Posted on Sep 14, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Nikon d90 LCD screen


Not sure if you were outside in a cold environment, that could cause the problems. Change form warm to cold and back. That could have caused the problem. But is that was so, the camera should act normal when you are in house for a couple of hours. If the problems stays, perhaps something more serious could be going on. As ling as you can make pictures, you should be fine tomorrow, because I think you don't actually don't need the screen on a D90 (except for looking up the histogram). It could be the screen will cure in a little while. If not, think of it that it is already damaged and you have to go to the nikon repair centre anyway.
I wish you luck.

Nov 12, 2013 | Cameras

1 Answer

Simplicity Regent Starting Problem


The wrong seat switch was installed. There are black ones and gray ones. I believe you need the gray one for open circuits.

Aug 10, 2012 | Simplicity Regent 19.5/38

2 Answers

Switched the TI-86's batteries but im getting a black screen


Hi,
After changing the batteries the calculator is o restored to factory defaults, but the screen contrast may change. The screen may be too light to see anything. Darken it a bit.
Press [2nd] key and release it.
Press and hold [UpArrow] until screen is dark enough.

Hope it helps.
Thank You for using FixYa and for rating the solution.

Dec 01, 2009 | Texas Instruments TI-86 Calculator

1 Answer

How to graph 2 lines at once


ok well go to the 'y=' button
type in the equation and make sure that the equals sign after y has like a black box around it, making the actual = white. so make sure both of those = signs of the 2 equations that you want to graph are like that, and thats about it.

Jun 19, 2009 | Texas Instruments TI-84 Plus Silver...

1 Answer

Start up Fault


this is n othing but your boot password...........try any of your password you would have mistakenly type or only one alternative is left if oyur lapyop motherboard is having a flat battery if this is removed and placed again the boot password will be diable........hope this will halp you...............sameeraryan

Dec 18, 2008 | Toshiba TE2100 Notebook

1 Answer

Lines in every pictre ,


This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free (for the S1 IS), including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:

http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html

http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819

Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110, IXUS V2/300/400/430/500, IXY Digital 200a/300a/400/450/500

Feb 18, 2008 | Canon PowerShot S2 IS Digital Camera

Not finding what you are looking for?
Texas Instruments TI-83 Plus Calculator Logo

774 people viewed this question

Ask a Question

Usually answered in minutes!

Top Texas Instruments Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

Stevan Milanovic

Level 2 Expert

264 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Texas Instruments Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...