Question about Toro 51599 Electric Blower 12 Amp

1 Answer

Motor won't turn on

It started like normal, then after I turned it off, when I tried to turn it on again it wouldn't it wouldn't run. Guessing needs a new switch?

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

If you're Toro electric blower is slowing down, throwing sparks, or not starting you may need to replace the carbon brushes. Replacing brushes and cleaning commutator early can prevent damage to motor armature!

There are Electric Motor replacement carbon brushes on E-bay for all three motor sizes (7 AMP, 10.5 AMP, and 12 AMP) of Toro Leaf Blowers (Toro Rake and Vac Super and Ultra Blower Vacuums)

Search E-bay for: "Toro Blower Carbon Brush"

- 12 Amp leaf blowers Toro Super (Old model 51552) through Toro Ultra (New model 51609).
- 10.5 Amp leaf blowers Toro Old through Toro New model 51573.
- 7 Amp leaf blowers Toro model 51586 and other Toro 7 amp blowers.

Posted on Apr 16, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Pontiac Grand Am SE security system wont let car start


first most GM OEM systems will need to recognize the key first and foremost ,to do that you will need to roll window down on driver door,turn the key to the run position and with engine NOT running leave the key on for 10 minutes exactly ..then turn ignition off then try to start engine. if original system is working engine should start normally

Mar 26, 2017 | Cars & Trucks

1 Answer

2004 Mercedes c240 won't start, turned the


It is located on the transmission where the sghift cable connects to the transmission.

Jun 12, 2013 | Cars & Trucks

1 Answer

Yamaha DT 125


If is violently loosing coolant from overflow then best case you need new radiator cap worst case head gasket needs replacing.

If it squirts a little when hot now and again or when you turn motor off squirts or drips a little then this is probably normal. just releasing pressure

I am guessing its leaking alot or you wouldn't have posted here.

www.motoxpartsonline.com

Oct 22, 2012 | 2005 Yamaha DT 125 X

1 Answer

Frigidaire dryer not working drum won't spin,


Hi How old is it , ? and dose it soun like the motor is running but not turnning the drum ? this would be a bad belt , you will need to do some more investagating for me to help you

Dec 06, 2011 | Frigidaire Dryers

1 Answer

Asko 7005 dryer, start capcitor is cracked and has hard goo coming out the side, dryer wouldn't start and stay running, now it won't start at all. Could the capacitor be the problem or do you think...


Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Jun 17, 2011 | Asko T781 Electric Dryer

1 Answer

The fan wouldn't start for the condenser unless I turned the blades with a stick so I replaced the start capacitor and it still won't start without turning the blades with a stick. It runs fine but...


This problem could be caused by a bad motor run capacitor. Please see our If your motor capacitor is not the problem, then more than likely you need a new motor.

Jun 13, 2011 | Ruud UBHC Air Conditioner

1 Answer

Finally started my 79 suzuki TS 250 and it wouldn`t stop. There`s no kill switch. I had to turn off the fuel and let it run out. Kind of worried about starting again. Tried starting it again, but having...


To stop a dieseling two stroke motor you can either choke them out (full choke) or block the air intake with a rag and starve the motor for air. Chances are the carburetor slide is sticking in a wide open position. Take the carburetor apart clean and inspect it. Also inspect the intake manifold for cracks and air leaks. For normal running add a kill switch so you can stop the motor without having to unplug or ground the spark plug. If the motorcycle is completely stripped except for a power wire to the coil, add the kill switch between the generator (wire coming out of the motor) and the coil.

May 09, 2011 | 1971 Suzuki T 350

Not finding what you are looking for?
Toro 51599 Electric Blower 12 Amp Logo

541 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toro Garden Experts

Joseph Mueller
Joseph Mueller

Level 2 Expert

338 Answers

Mike Squire

Level 2 Expert

391 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Toro Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...