Question about Black & Decker MX55 PowerPro Hand Mixer

Open Question

I'm wanting beaters (2) for Durabrand mixer HM845

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Find Beaters for Bravetti Mixer


seems to have been already answered on Fixya

Call 1-800-798-7395. I just ordered some for my mixer. Cost $7.95 + $4.95 for 2. Be sure to have your model number when you call.

need beaters for Bravetti 300W hand mixer

Dec 11, 2015 | Bravetti Food Mixers

1 Answer

Durabrand hand mixer model no HM845


Shame you don't have a question.

Aug 29, 2014 | Food Mixers

1 Answer

Durabrand Stand Mixer Parts Model No HM0112


Im looking for the beaters of this model mixer, have looked in other web sites and no luck...please help

Feb 07, 2013 | Food Mixers

1 Answer

One of my blades is stuck and I can't engage the release


Make sure your Beater can slip in and out of the Beater Shaft
easily. Do not force the beater onto the Shaft if the shaft is bent.
If it cannot be removed easily by hand, use a soft rubber mallet
(not a steel hammer) to slightly tap the beater so it can be moved
up and down the shaft or from side to side. Then you can easily
turn the beater left and remove it from the shaft.

From Kitchenaid Manual:
To Attach Flat Beater, Wire Whip, or Dough Hook
1. Turn speed control to OFF.
2. Unplug stand mixer or disconnect power.
3. Tilt motor head back.
4. Slip beater onto beater shaft and press upward
as far as possible.
5. Turn beater to right, hooking beater over pin on shaft.
6. Plug into a grounded 3 prong outlet.

To Remove Flat Beater, Wire Whip or Dough Hook
1. Turn speed control to OFF.
2. Unplug stand mixer or disconnect power.
3. Tilt motor head back.
4. Press beater upward as far as possible and turn left.
5. Pull beater from beater shaft

Jul 19, 2011 | KitchenAid KSM150PS Artisan Series Stand...

1 Answer

First time using bread dough beater It was hard to put on and am unable to remove


Make sure your Beater can slip in and out of the Beater Shaft

easily. Do not force the beater onto the Shaft if the shaft is bent.

If it cannot be removed easily by hand, use a soft rubber mallet

(not a steel hammer) to slightly tap the beater so it can be moved

up and down the shaft or from side to side. Then you can easily

turn the beater left and remove it from the shaft.


From Kitchenaid Manual:

To Attach Flat Beater, Wire Whip, or Dough Hook

1. Turn speed control to OFF.

2. Unplug stand mixer or disconnect power.

3. Tilt motor head back.

4. Slip beater onto beater shaft and press upward

as far as possible.

5. Turn beater to right, hooking beater over pin on shaft.

6. Plug into a grounded 3 prong outlet.

To Remove Flat Beater, Wire Whip or Dough Hook

1. Turn speed control to OFF.

2. Unplug stand mixer or disconnect power.

3. Tilt motor head back.

4. Press beater upward as far as possible and turn left.
5. Pull beater from beater shaft.

Jul 17, 2011 | KitchenAid KSM90 Ultra Power Series Stand...

1 Answer

Bread dough beater will not come off


Make sure your Beater can slip in and out of the Beater Shaft
easily. Do not force the beater onto the Shaft if the shaft is bent.
If it cannot be removed easily by hand, use a soft rubber mallet
(not a steel hammer) to slightly tap the beater so it can be moved
up and down the shaft or from side to side. Then you can easily
turn the beater left and remove it from the shaft.

From Kitchenaid Manual:
To Attach Flat Beater, Wire Whip, or Dough Hook
1. Turn speed control to OFF.
2. Unplug stand mixer or disconnect power.
3. Tilt motor head back.
4. Slip beater onto beater shaft and press upward
as far as possible.
5. Turn beater to right, hooking beater over pin on shaft.
6. Plug into a grounded 3 prong outlet.

To Remove Flat Beater, Wire Whip or Dough Hook
1. Turn speed control to OFF.
2. Unplug stand mixer or disconnect power.
3. Tilt motor head back.
4. Press beater upward as far as possible and turn left.
5. Pull beater from beater shaft

Jul 17, 2011 | KitchenAid KSM90 Ultra Power Series Stand...

3 Answers

I need replacement beaters for an old GE hand mixer.


I bought an old GM mixer no. 30M47 with no beaters yesterday at the Salvation Army store. The beaters I have for a newish (ugly) GE hand held beater fit perfectly. I suggest taking your old beater to a store that sells new GE handheld beaters and seeing if the new beaters fit. If anyone reads this and wants me to look up the number of the new ugly beater for them, please say so before I take it to the Salvation Army.. : )

Oct 21, 2009 | Black & Decker MX55 PowerPro Hand Mixer

1 Answer

Where can I find replacement beaters for my Durabrand hand mixer HM-106?


Hi. Your only contact with Durabrand is at Walmart where it was purchased. Walmart has sombody manufacture these things and then slaps the walmart brand, in this case Durabrand on them. You may not be able to find parts. Call your local Walmart and ask them.

If they can't get parts, try a small appliance repair place. The beaters just may be a common size . Good luck! ricardok45.

Apr 21, 2009 | Food Mixers

4 Answers

Replacement Beaters for GE Hand Mixer


Hi, replacement beaters can be found at amazon, click here and take a look: Amazon com hand mixer beaters. Wish you best of luck.
Ned

Dec 02, 2008 | Black & Decker MX55 PowerPro Hand Mixer

Not finding what you are looking for?
Black & Decker MX55 PowerPro Hand Mixer Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Black & Decker Food Mixers Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Karl Kittsteiner

Level 2 Expert

214 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Black & Decker Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...