Question about KitchenAid KSF26C4XYY 26.0 cu. ft. Side by Side Refrigerator with 4 Spill Shield Glass Shelves, Humidity-Controlled Crispers, External Ice/Water Dispenser and LED Theatre Lighting: Monochromatic Stainless Steel

1 Answer

Inside lights of KitchenAid KSF26C4XYY not illuminate

Posted by on

  • jasbir
    jasbir Apr 15, 2014

    Everything else is working.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 33 Answers

I bet your fridge was put into Sabbath Mode.

Sabbath Mode is designed for those whose religious observances
require turning off the lights and dispensers.
In Sabbath Mode, the temperature set points remain unchanged,
but the interior and dispenser lights turn off, all sounds and alarms
are disabled, the dispenser display screen backlight turns off, and
the dispenser levers are disabled


To turn on Sabbath Mode, press and hold LIGHT and
OPTIONS at the same time for 3 seconds. When the feature
turns on, "Sabbath Mode" will appear on the dispenser
display.
To turn off Sabbath Mode, press and hold LIGHT and
OPTIONS at the same time for 3 seconds again.

Posted on Apr 16, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changed water filter red light still on


Check for a reset, or unplug just for a min or two. Then check.

Sep 11, 2015 | KitchenAid KSF26C4Xyy Side by Side...

1 Answer

How do you remove the, RL40 SBSW model Samsung fridge cover to replace the bulb?Thank youAdele


There are 2 plastic extrusions that clip in place. Pull sharply forward, or lever the sides gently up and down with a flat screwdriver above the bits that clip in. The bulb unscrews.

Apr 21, 2014 | KitchenAid KSF26C4XYY 26.0 cu. ft. Side by...

1 Answer

Inside led lights of KitchenAid KSF26C4XYY not illuminate


There is a switch (somewhere on the door frame) that has to close to turn the lights on when a door is opened . They are pretty reliable, but if a switch fails due to a mechanical problem, you can sometimes tell by the feel when you operate it manually. If your switch seems OK, then I'd wonder about the power supply for the lights (which I know nothing about).

Apr 15, 2014 | KitchenAid KSF26C4XYY 26.0 cu. ft. Side by...

2 Answers

How do you reset a KitchenAid dishwasher model: KUDE70FXSS4?


Press High Temp Scrub and Dry Heat option buttons in quick succession one after the other for about 6 sec until all the lights come on. Then press Cancel button. This should reset the dishwasher. Press equivalent buttons on the panel if the actual ones above are not there.
Make sure the dishwasher detergent dispenser lid is shut and the dishwasher door is shut before you start the above reset sequence.

Jan 02, 2013 | KitchenAid Dishwashers

1 Answer

Funny noise coming from the air filter


probably bad ice maker


http://www.shopjimmy.com/

Sep 06, 2012 | KitchenAid Refrigerators

1 Answer

Instrument panel lights not working. cigar lighter illumination not working. air control illumination not working left hand side lights not working.


It is most probably that the bulb inside which illuminates the panel is blown.It is a big job to get to but simple to fix.Hope this helps.

Feb 13, 2010 | Renault Le Car Cars & Trucks

1 Answer

Replaced heating element and board. Worked for a week and now won't run. Wash light illuminate for about a minute, then goes out.


may need pump motor assembly or a thermosttat/fuse if u replaced those already i think thats whuts left

Jan 27, 2010 | KitchenAid Dishwashers

1 Answer

How does the illuminated light work inside a Leviton light switch? Since there is no neutral (white) wire hooked up to the switch itself? Does the switch illumination light have its current flow into the...


The neon lamp inside of the switch draws very little current (milli, or mico amps) so there is no significant current flowing to ground.

As for your real question, there are several various types of 3-way pilot switches:
Load on: Pilot on
Load off: Pilot on
Some 3-way pilot switches have an external lead which allows them to be configured either way.
If both of your switches are the same type and are wired correctly, they should work the same.
If you suspect that one is defective, try swapping them.

Aug 03, 2009 | Electrical Supplies

1 Answer

Keeps making beping sounds


Not shuting off..it is off if the dispaly and lights are not illuminated

Dec 23, 2008 | KitchenAid KSRS25IL Side by Side...

Not finding what you are looking for?
KitchenAid KSF26C4XYY 26.0 cu. ft. Side by Side Refrigerator with 4 Spill Shield Glass Shelves, Humidity-Controlled Crispers, External Ice/Water Dispenser and LED Theatre Lighting: Monochromatic Stainless Steel Logo

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4654 Answers

mike cooper

Level 3 Expert

884 Answers

Todd Arndt
Todd Arndt

Level 3 Expert

2044 Answers

Are you a KitchenAid Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...