Question about Sharp AR-235 Copier
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Sharp AR 235 error code E1-11
Abnormality on the IMC board.
Try resetting by pressing # / interrupt / c / interrupt.
punch 14 and ok / enter.
restart your copier.
if it doesn't work you will need a tech.
Posted on Jun 18, 2009
Make sure the thermistor is clean and ok then press, P, Interrupt, C, Interrupt. It asks for a code, Enter 14 press print then press Execute on touch screen.
Posted on Nov 30, 2009
L6-10 Content Polygon motor lock detection
Detail It is judged that the polygon motor lock signal
is not outputted.
Lock signal is checked in the interval of
10sec after starting the polygon motor, and it
is judged that the polygon motor does not
Cause The LSU connector or harness in the LSU is
disconnected or broken.
Polygon motor trouble
Use DIAG (SIM61-1) to check the polygon
Check connector and harness connection.
Posted on Jan 24, 2010
SOURCE: Sharp AR 235, output light
You have to change the Developer in the developing unit. code is: AR271D
This procedure must be done by a copier tech.
Posted on Feb 15, 2010
Testimonial: "Your help is much appreciated, regards: Márton"
Tips for a great answer:
Dec 06, 2012 | Office Equipment & Supplies
L6 10 Content Polygon motor lock trouble
Details The polygon motor does not rotate.
The motor lock signal is detected for 6sec
or more after the polygon motor rotates.
The motor lock signal is detected for 1sec
during rotation of the polygon motor.
Cause Polygon motor unit failure
Polygon motor connection harness trouble
MCU PWB failure
Check the polygon motor operation with
Check connector/harness of polygon
Replace the polygon motor.
Replace the MCU PWB.
If the polygon motor isn't working then you will neeto buy a new Laser Unit. They can be expensive if you can get one. To replace it will tak alot of disassembly as well. Might be better and more cost effective to get a new machine.
Oct 22, 2011 | Sharp AR-235 Copier
Aug 18, 2010 | Sharp AR-235 Copier
Jun 29, 2010 | Sharp AR-235 Copier
May 18, 2010 | Sharp AR-235 Copier
Apr 26, 2010 | Sharp AR-235 Copier
21 people viewed this question
Usually answered in minutes!