Question about Samsung HM251JI 250 GB SATA Hard Drive

1 Answer

HM251JI firmware firmware file download

Posted by on

  • Brad Brown Apr 14, 2014

    Hi Eliezer Robles, I want to help you with your problem, but I need more information from you. Can you please add details in the comment box?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Samsung Master
  • 752 Answers

I suggest reading the manual for this disk, which can be downloaded here
http://www.nodevice.com/download/user_manual/samsung+hm251ji.html
At the beginning, Q5 says:

"I am looking for a Software & Firmware (mainly about drivers) but I

found nothing.

Where I can find I want ?

We don't release any firmwares.

Because the product has been already optimized with its own

configurations.

IDE (PATA & SATA) drive does not need any drivers. You just have

to make a partition and format your drive for using.

Please make sure whether you had partitioned and formatted.

First of all, you must partition and format for recognizing the new

drive in the Windows Explorer.

Within Win98 series, please use the Fdisk.

Within Win2000 & Win-XP, please use the Disk Management.

When installing Win2000 or Win-XP, the installation process
includes the partitioning step itself." etc.
14.April.2014

Posted on Apr 14, 2014

Testimonial: "unfortunately this tip wont help me. I already checked that firmware is corrupted. I need update again using HD Doctor. Do you know where i would can download it?"

  • etrc_new Apr 14, 2014

    This is an old disk drive (correct me if I am wrong). Some disks have a model number and a p/n. I tried the Samsung website/downloads with HM251JI, you might try using th p/n (I not hopeful). Samsung's HD business was ought by Seagate, so you might also try contacting Seagate support (I searched for HM251JI without finding a result) and ask them if they can help, either with download, or someone wo could provide it. 14.April.2014

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do we correct a 900.57 firmware error. What does this mean and how do we get printer to print?


Windows 7 is the operating system on your computer. Firmware is the operating system on your printer. You need to update the firmware on the printer.
Firmware update instructions:

  1. Download the appropriate update file below
  2. Unzip the downloaded file
  3. Read the README file (located in .zip file) before updating

support lexmark com

Nov 22, 2014 | Lexmark E360DN LASER PRINTER N Laser...

1 Answer

Samsung HM251JI 250 GB SATA Hard Drive firmware download


I suggest reading the manual for this disk, which can be downloaded here
http://www.nodevice.com/download/user_manual/samsung+hm251ji.html
At the beginning, Q5 says:

"I am looking for a Software & Firmware (mainly about drivers) but I

found nothing.

Where I can find I want ?

We don't release any firmwares.

Because the product has been already optimized with its own

configurations.

IDE (PATA & SATA) drive does not need any drivers. You just have

to make a partition and format your drive for using.

Please make sure whether you had partitioned and formatted.

First of all, you must partition and format for recognizing the new

drive in the Windows Explorer.

Within Win98 series, please use the Fdisk.

Within Win2000 & Win-XP, please use the Disk Management.

When installing Win2000 or Win-XP, the installation process
includes the partitioning step itself." etc.
14.April.2014

May 11, 2012 | Samsung HM251JI 250 GB SATA Hard Drive

2 Answers

We have a 3CRWDR101A-75 3com wifi router and its not upgrading the firmware, I downloaded the firmware from the site and then when I try to upgrade all I get is file verification failed... any thoughts...


The downloaded file is "corrupt", and thus it fails the "verification" process.

Download the firmware again, and compare the two files.

Or, use a different computer to download the firmware, and to do the firmware-update.

Apr 20, 2011 | 3Com OfficeConnect Remote 612 ADSL Router

1 Answer

How to back up and get back documents in Samsung HM251JI hard drive?


connect your hard disk to computer, it will deteck new hard disk, then at windows explorer to copy/back up your samsung hard disk to the computer that you connect with your samsung har drive, it is so easy to do that

i hope this helpful
thank you for using fixya

Feb 14, 2011 | Samsung HM251JI 250 GB SATA Hard Drive

1 Answer

During transfer some file,my portable hard drive failure.Then i remove safely before i put it again.The problem is,my portable hard drive asked me to format.What can i do without format?


get a copy of linux puppy and boot from cd while your external drive plugged in, it should recognise this under linux, then get what files you need and transfer to usb drive and reformatt the drive, I hope this helps

Feb 14, 2011 | Samsung HM251JI 250 GB SATA Hard Drive

1 Answer

PLAYER UPDATE REQUIERD !!! PLEASE REFER TO THE MANUAL


Hello,

All online support for iRiver players is on next site:
http://www.iriverinc.com/lounge/loungeList.asp
note
If you enter an unreadable page: return to / start from the support site above.

Download of the manual
>
select a category: Manual
select a product: E10
click GO
select: User Manual of E10
Click the zip file in the language you prefer: English.zip for English .
Unzip the file after the download with Winzip or Winrar, to see the PDF file that can be read with Adobe Reader.
<
Upgrade using iRiver PLUS3 = Download and run iplus3.exe for matching the software on your computer and the firmware on the player
>
In page top of the support site: click Plus3
Click the Overview | Function | Download to see what Plus3 is and how it works.
Click Download irver PLUS3 to directly start the installation of this program onto your computer
<
Update the firmware = Download the firmware and run the firmware updater
for putting new firmware into the player
>
select a category: Firmware
select a product: E10
click GO
select: New Firmware of E10
Download the updater zip file
Unzip the firmware updater with Winzip or Winrar and run the execute file to start iriver Firmware Updater: follow the steps.
After a firmware update always run the Plus3 upgrade: to have the correct software on your computer that communicates with the player's
firmware
<

Aug 01, 2010 | iRiver E10 Digital Media Player

1 Answer

I have a Smasung HDD with the following information: 1. S/N: S19CJF0S505188 2. Model: HM251JI 3. HDD P/N: HM251JI 4. LBA 488, 397,168 250.0GB M6S_2D 5. 250GB/5400rpm/8M I...


Changing either the platter or the head of the hd drive isn't possible to done in the home - office envoiroment. Try recovering your data (if your hdd is still accesible) at another disk and then check for the waranty of your hdd.

Stelios.

Feb 22, 2010 | Computers & Internet

1 Answer

FIRMWARE


You will not be able to open the file as it is. You have to install the firmware from within the router configuration page. Access the router like 'http://192.168.x.x' and then find where it says firmware upgrade, locate the downloaded file from your PC and then upload it.
Let me know.
Thanks

Dec 23, 2007 | Linksys Wireless-G WRT54G Router

1 Answer

How to upgrade the firmware on a BEFSR41


Firmware upgrades may erase all previous settings to your router's configuration. Before upgrading your firmware, make sure to record your settings. 1. Unplug and disconnect all computers from the router except for one. This computer must be plugged into the router directly. There can be no other network activity on the router during the upgrade, so be sure to power off all other computers. 2. Go to http://www.linksys.com/download 3. Select the model number of the Linksys router you have (BEFSR41) as firmware upgrades vary by model and version. You can find your router version underneath your router after the model number. For example, ?BEFSR41 Ver. 3?. 4. Click the Downloads for this Product button. 5. Once you arrive on the download page, click the Firmware button. 6. After the firmware page opens, click the link that says ?Click here to download the latest firmware...? and download the firmware file to your computer. 7. Once you download the firmware Zip file, unzip it. If you do not have an unzipping program, go to http://www.winzip.com and download WinZip, which will allow you to unzip the file. 8. After unzipping the firmware files, one of them will be called TFTP.EXE. Double click on it. 9. When the ?Upgrade Firmware? window opens, you will have three prompts. The ?Server? field is for the IP address of your router; by default this would be 192.168.1.1. 10. Enter the routers password into the ?Password? field; by default the password is admin. 11. Browse for the file in the Firmware Upgrade utility program by clicking on the button next to file with the '?' symbol on it. Look for the file named 'code.bin' in the folder where the firmware files were extracted to. 12. Highlight the code.bin file and click on the Open button to direct the TFTP loader program to put that file into the "File" box. 13. The full path should be displayed [example: c:\linksys\code.bin]. 14. Click on the Upgrade button to begin the upgrade process. 15. The upgrade should take about 1 minute, and you will be prompted after the upgrade is complete and successful. If you are still having troubles, contact Linksys Technical Support.

Feb 16, 2006 | Linksys EtherFast Cable/DSL Router

2 Answers

How to upgrade the firmware on a BEFW11S4


Firmware upgrades may erase all previous settings to your router's configuration. Before upgrading your firmware, make sure to record your settings. 1. Unplug and disconnect all computers from the router except for one. This computer must be plugged into the router directly. There can be no other network activity (wired and wireless) on the router during the upgrade, so be sure to power off all other computers. 2. Go to http://www.linksys.com/download 3. Select the model number of the Linksys router you have. Make sure to select the correct router version as well, as firmware upgrades frequently vary by version. You can find your router version underneath your router after the model number. For example, ?BEFW11S4 ver. 2?. 4. Click the Downloads for this Product button. 5. Once you arrive on the download page, click the Firmware button. 6. After the firmware page opens, click the link that says ?Click here to download the latest firmware...? and download the firmware file to your computer. 7. Once you download the firmware Zip file, unzip it. If you do not have an unzipping program, go to http://www.winzip.com and download WinZip, which will allow you to unzip the file. 8. After unzipping the firmware files, one of them will be called TFTP.EXE. Double click on it. 9. When the ?Upgrade Firmware? window opens, you will have three prompts. The ?Server? field is for the IP address of your router; by default this would be 192.168.1.1. 10. Enter the routers password into the ?Password? field; by default the password is admin. 11. Browse for the file in the Firmware Upgrade utility program by clicking on the button next to file with the '?' symbol on it. Look for the file named 'code.bin' in the folder where the firmware files were extracted to. 12. Highlight the code.bin file and click on the Open button to direct the TFTP loader program to put that file into the "File" box. 13. The full path should be displayed [example: c:\linksys\code.bin]. 14. Click on the Upgrade button to begin the upgrade process. 15. The upgrade should take about 1 minute, and you will be prompted after the upgrade is complete and successful. If you are still having troubles, contact Linksys Technical Support.

Feb 16, 2006 | Linksys BEFW11S4 802.11b Wireless...

Not finding what you are looking for?
Samsung HM251JI 250 GB SATA Hard Drive Logo

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Computers & Internet Experts

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

kakima

Level 3 Expert

102366 Answers

phoenix chi
phoenix chi

Level 2 Expert

389 Answers

Are you a Samsung Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...