Question about Sony Grand WEGA KF50WE610 50" Rear Projection HDTV-Ready Television
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Sony KP-53s65
take the back off oh unplug it first and then read the label that says no user serviceable parts inside its kinda like the tag on pillows the three delta lenses can be cleaned with a soft cloth dampened with windex they are an optical grade of plastic like the screen so all those caveats apply if you are really brave you can take the lense assemblies off and clean (gently the concave) portion of the top of the crts they are filled with coolant and should be treated with care if you are really brave use windex on the plate glass mirror if you are nice to your tv it will look real good when you get done it will look even better if you know how to refocus the focus block and the screen controls all the home theater dvds wont make up for zen and the art of projo maintenance
Posted on Dec 09, 2006
You are losing screen voltage or whats called the boast voltage most likely. This is probably being caused by a bad capacitor in the sweep power supply. You will need to get a service manual as well as use an ESR type capacitor meter to find the bad capacitor(s). Good Luck
Posted on Jun 05, 2007
SOURCE: sony 7 blinks
6 times, Diagnosis: LOW B OCP/OVP (Overcurrent/over
voltage). Possible causes: +5 line is overloaded. (A, B boards), +5
line is shorted. (A, B boards). Symptoms of the problem: No picture.
also found this
MODEL: KDP51WS550, KDP57WS550, KDP65WS550, KP46WT500, KP46WT510, KP46WT520, KP51WS500, KP51WS510, KP57WS500, KP57WS510, KP57WS520, KP65WS500, KP65WS510
SUBJECT: Picture gets bright then shuts down. After repairs tech noticed a mark was created on all 3 CRT's.
CAUSE: Found Video Output was defective causing the failure of the 200v line. 200 volt line has two fuse resistors R7301 (10 ohm 1/4w) on the CB Board. R8225 (1 ohm 1/2w) on the D board. R8208 (0.47 ohm 1/2w) also on the D Board. All three resistors are in series. One or all 3 could be open. After replacing 2 resistors and Video Output IC set returned to normal operation. CRTs will need to be changed due to phosphor damage. On Models KDP-51WS550, KDP-57WS550, KDP-65WS550 CB Board resistor is R9335 10 ohm 1/4w. D Board resistor is R6509. NOTE: This resistor may be a jump wire according to the schematic. Models: KP-51WS520, KP-57WS520 These models have a fuse resistor on all 3 CRT Boards. CB R9335 10 ohm 1/4w CR R9110 10 ohm 1/4w CG R9211 10 ohm 1/4w On the D Board R6509 is a jumper wire according to the schematic.
Posted on Dec 11, 2007
Tips for a great answer:
Apr 29, 2015 | LG Televison & Video
on Jan 08, 2011 | Sony BRAVIA KDL-40S2010 40 in. LCD...
Nov 27, 2014 | Televison & Video
May 09, 2014 | Sharp Televison & Video
Apr 30, 2009 | Akai PDP-4247 Television
Jun 12, 2008 | Panasonic Televison & Video
18 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: