Question about HP LaserJet P3005 Printer
Posted by Anonymous on
You may need to replace PICK UP ROLLER & SEPARATION PAD
Posted on Nov 26, 2014
Your problem description is not clear, but based on experience I bet that your printer is taking three sheets of paper at a time. The pickup roller in tray 2 and the separation pad in the tray are probably worn out. They are easy enough to replace. You can verify that printer works properly by printing from manual feed tray and if that works ok then above solution is likely your fix.
Posted on Apr 20, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Use recommend paper (see user manual). Do not leave paper exposed to air as it draws up moisture. check paper sensor flag near tray 2 p/u roller. It should move freely without resistance. It may have gotten knocked out of position.
Posted on Feb 06, 2009
SOURCE: error code 49.4c18
A critical firmware error has occurred.
Turn the device off and then on.
2. Try to determine whether the error
occurs intermittently, while printing, or
when turning on the device.
3. If the error appears while printing,
determine whether it occurs when
printing from a specific computer, a
specific application, or a specific file. If
all other computers, applications, or files
can print without the error, then the
problem may be only within one print job
or computer. Make sure the computer
has the most current printer drivers, or
use a generic printer driver.
4. Go to www.hp.com/support/LJP3005.
Click Download Drivers and
Software. Check for the latest firmware
image version at the bottom of the page.
If this firmware image is newer than the
one installed on the device and the
device can receive a firmware update,
download the newer firmware upgrade.
5. Try printing a job from a different
software program. If the job prints, go
back to the first program and try printing
a different file. If the message appears
only with a certain software program or
print job, contact the software vendor for
6. If the message persists, contact
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Posted on May 22, 2009
SOURCE: how to i configure the
Hello, When you first install the printer onto the Network it will automatically find an IP Address, this is called "DHCP". In order to change the IP Address the printer needs to be setup as what is known as "STATIC". You can do this in in a couple of ways 1) Type the IP Adrees into an internet explorer Browser, this should open up the printers EWS (embedded Web Browser) if it opens click on the networking tab - Chnge the IP Address , set DHCP to "OFF"and click Apply. 2) From the printers control panel - push the "MENU" button and scroll down to the "CONFIGURE DEVICE" to "I/O" to "EMBEDDED JETDIRECT" Withi the TCIP setting you are able to change the printers IP Address
Posted on Jan 15, 2011
Tips for a great answer:
Aug 14, 2014 | HP LaserJet P3005dn Printer
May 20, 2014 | HP LaserJet P3005dn Printer
Jan 09, 2012 | HP LaserJet P3005n Printer
Feb 09, 2011 | HP LaserJet P3005 Printer
Nov 22, 2010 | HP LaserJet P3005dn Printer
Aug 03, 2009 | HP LaserJet P3005dn Printer
Jul 25, 2009 | HP LaserJet P3005n Printer
Apr 20, 2009 | HP LaserJet P3005dn Printer
Nov 07, 2008 | HP LaserJet P3005n Printer
Feb 13, 2008 | HP LaserJet P3005dn Printer
83 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: