Question about Nikon N65 35mm SLR Camera
Posted by Anonymous on
Most of the answers you have gotten so far are correct. When this happens it usually means the film is not winding off the spool. when you load film next time, keep the back open and watch to see if it winds, you can use about 5 to 6 inches of film and still have enough for 24 photos.
Posted on Feb 18, 2015
Was the film set into the camera correctly ?
Posted on Feb 13, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: fEE error message
To get rid of the pesky fEE just set your lens to f22 or f16 ( depending on what lens you have ) and that is all. You might also want to lock this setting in ( if it is a Nikon lens then the lock is on the side just above the lens aperture ring.
Posted on Dec 07, 2007
SOURCE: Blank Film Developing
you should have at least 6in. of exposed film from the film canister to the take-up spool unless you loaded the film in total darkness.
open the back cover to make sure the shutter is working, reload and give it another try.
Posted on Jan 30, 2009
Check the batteries first. The electromagnetic shutter requires power to function. To free up the shutter and advance lever, rotate the command switch to "M90" (if I recall). That should re-set the shutter and allow you to advance the lever mechanically.
Posted on Jul 04, 2009
Set camera to M90 or B, it will free the shutter. If if fires at these settings but not others then you have an electronic problem. If it does not fire at M90 or B then you have a mechanical problem. Clean the battery cap with a hard eraser and make sure the batteries are in correctly - does the battery check work? Also check to make sure that the battery compartment is not broken. Using a thin round tool, insert it into the battery compartment and push down slightly (not Hard!) and see if the battery compartment gives or you see a crank. Also check for impact around the rewind knob. The FRE resister plate there is made of glass and impact breaks it.
Posted on Apr 07, 2012
Tips for a great answer:
Jun 02, 2015 | Fujifilm Instax Mini 25
Apr 23, 2017 | Pentax K1000 35mm SLR Camera
Oct 25, 2012 | Polaroid 420 Film Camera
Oct 04, 2012 | Pentax ME Super 35mm SLR Camera
May 11, 2011 | Canon Sure Shot 60 35mm Point and Shoot...
Feb 16, 2011 | Nikon F100 with 28-80 and 70-300 lens 35mm...
Sep 15, 2009 | Canon Sure Shot Classic 120 35mm Point and...
Feb 05, 2009 | Nikon F80 35mm SLR Camera
Jan 25, 2009 | Nikon N90S 35mm SLR Camera
Dec 09, 2008 | Canon EOS-AE-1 35mm SLR Camera
291 people viewed this question
Usually answered in minutes!