Question about Franke Saphira Espresso & Coffee Maker

1 Answer

Franke flair trips the electric when turned on

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 13 Answers

It might be good idea to disconnect the coffee valve and switch on machine as it's 230v and might be shorted and tripping and blows fuses.If it is then replace brew valve.

Posted on Jul 09, 2014

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

espressonist
  • 1711 Answers

SOURCE: Hi Hope you can help me. I have a Franke Flair

The problem is probably a damage boiler heating element. It have brake out at a point so it making electrical contact with water and so with body and finaly with earthing of the electrical system and thus trips the main fuse which is the erthing protection system.
So you need to replace the heating element. You need also a good inspection to find if their is another reason why the heating element blow up or if its just because of exeed use of the machine.
Good Luck

Posted on Apr 10, 2010

mikey270
  • 26 Answers

SOURCE: I have a franke flair coffee machine when you

DESCALING The Saphira has an integrated descaling program. The procedure takes about 60 minutes. Once started, the descaling procedure may not be stopped. • When acid-containing descalers are used, immediately remove any splashes or drops on sensitive surfaces, particularly from natural stone and wood surfaces. Also, take the appropriate safety precautions. • Turn off the Saphira by pressing the "ON/OFF" button. • Press the button "Descale" until an acoustic signal is heard. • Display: EMPTY DRIP TRAY (Fig.1) • Display: INSERT AGENT IN TANK • Display: PRESS DECALCIFYING Dissolve 2 DESCALING tablets completely in 2.5 cups of water in a vessel and pour the mixture into the empty water tank. Place a sufficiently large container under the steam tube and the coffee delivery outlet. • Press the Descale button • Display: UNIT DECALCIFYING • Display: PLEASE WAIT • An acoustic signal is heard. • Display: EMPTY DRIP TRAY (Fig.1) • Display: FILL WATER TANK • Display: PRESS DECALCIFYING • Press the Descale button • Display: UNIT DECALCIFYING • Display: PLEASE WAIT • An acoustic signal is heard. • Display: EMPTY DRIP TRAY • Display: CLEAN CONTACTS
Good Luck Mikey@espressomachineexperts.com

Posted on Jan 29, 2011

enquiries560
  • 12 Answers

SOURCE: how can I get different

Here's a link with a training video for the Flair which is on our website
Denby Dale Coffee

Franke Flair Video

Posted on Oct 30, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My franke flaire machine keeps displaying empty drip tray its empty and clean and will not let me do any thing else can you help


AT THE BACK OF THE DRIP TRAY YOU HAVE CONTACTERS LIKE SWICH SOW ITS BEST TO REMOVE THE TRIP TRAY AND TELL THE HAIR DRYER DO THE JOB TRY AGAIN

Mar 03, 2016 | Franke Coffee Makers & Espresso Machines

1 Answer

How to remove the lid on a franke flair coffee machine


If you are refering to the main cover! firstly the hoppers have to be removed. then the metal plate on the top(cup warmer) secured with 4 x t15 torx screws. once the plate is removed the main cover is secured with 4 oval headed screws 2 of them located under the plate just removed. the other 2 are located under the adjustment rings for the grinders. the main cover then can be removed. there are 2 electrical connection plugs that have to be disconnected .

Apr 26, 2015 | Franke Flair Espresso Machine with...

1 Answer

Why won't my Franke flair machine won't run only says please wait.is there a reset switch ?


there is no reset switch, please wait on the display indicates the machine is heating . but the sensors are not registering the temp. this means either the thermoblock/s have failed (unlikely) there are upto 4 thermal fuses mounted on the thermoblocks . this is more likely the problem. any more info required please et me know

Jan 10, 2015 | Franke Flair Espresso Machine with...

1 Answer

My franke flair coffee machine will not power up


the two main reasons for this are the on off switch located on the back of the machine is switched off. the other is the flap to the grinders is not correctly fitted. other than this an exporative visit by an engineer may be required. there are two mains fuses situated by the cable inlet behind the rear panel.

Apr 26, 2014 | Franke Flair Espresso Machine with...

1 Answer

Franke flair malfunction 8


you have problems with the brewing group. perhaps the o-ring on the upper piston is broken.

Dec 05, 2012 | Franke Saphira Espresso & Coffee Maker

2 Answers

How can I get different size lattes and cappucinos with my Franke Flair? all it gives me is a shot size serving...


enter programme button.push and hold for 5 secs.machine will show def product. press programme again to confirm.select product comes up on screen.press the product you want to adjust eg espresso.now use the + and - buttons to scroll through the espresso setting. if you want to adjust anything in the settings, you need to press programme. then make the adjustment with the + and- buttons then press enter when finished the actual adjustment .once finished with the espresso and happy press exit button.repeat the process for the next button. you can down load a manual at franke .com

Aug 17, 2010 | Franke Saphira Espresso & Coffee Maker

2 Answers

Hi Hope you can help me. I have a Franke Flair coffee machine which a relative as just given me from there pub. I switch it on and it seems ok until i place the drip tray in position as soon as the...


240vac is then switched when the drip tray conntact connect. 240vac goes to both thermoblock heaters and pump.possibly a dead short inn the heating or pump circuit.check all connections and look for slack connections around the pumps. brewing motor runs and magnetic drian valve opens also at switch on, check also.

Apr 10, 2010 | Franke Saphira Espresso & Coffee Maker

5 Answers

If you need a Franke trained coffee machine engineer to repair, service or for training, i can be there within 24hours, Email me for any questions great prices! 50mile radius of CV21 3SH


Hi
I have just bought a Franke Flair coffee machine second hand. It looks like new and the seller said it was in good working order - however it does not have the grinder blocker and I think we need one. I wouldn't mind also getting the once over from an expert and then maybe some kind of ongoing contact should we have problems with it. What are your rates?

Jun 15, 2009 | Franke Saphira Espresso & Coffee Maker

Not finding what you are looking for?
Franke Saphira Espresso & Coffee Maker Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Franke Coffee Makers & Espresso Machines Experts

frankecoffee

Level 1 Expert

29 Answers

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

Yves

Level 1 Expert

17 Answers

Are you a Franke Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...