Question about Oregon Scientific Wireless IndoorOutdoor Thermometer with Atomic Clock Mod

Open Question

My indoor outdoor thermometer does not display the outdoor temperature

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Outdore temp. is not working


Could be battery failure in the outdoor sender. You may have to replace batteries and reinitialize following the exact procedure in the Equity Time instructions.

Jul 24, 2016 | Equity Time USA 31215 Wireless Outdoor...

1 Answer

ONLY SHOWS INDOOR TEMPERATURE DOES NOT SHOW OUTDOOR TEMPERATURE


I have a similar device and the instructions say to remove batteries from both units and wait for 10 minutes without pressing any buttons before installing batteries first in the remote unit then the indoor unit. The outdoor and indoor units have to "talk" to each other before getting in the mood to display temperatures.

Feb 03, 2013 | Oregon Scientific Wireless IndoorOutdoor...

1 Answer

Is there an online manual for Springfield 91756 Wireless Thermometer w/Indoor/Outdoor Temperature & Humidity


Yes. Took awhile to find it, but here is the link: https://docs.google.com/gview?url=http://www.weatherconnection.com/manuals/91756.pdf&chrome=true

Aug 07, 2012 | Springfield Measuring Tools & Sensors

1 Answer

I have a TX6470 and cannot receive the outside temp on the inside unit


Double check the batteries to make sure they are installed correctly. If one of the batteries in the outdoor sending unit is in backwards, it will not send the outdoor data. On the indoor unit, there is typically one battery that is used for receiving the signal from the outdoor unit. If all of the batteries are in correctly but that one, you will see the display and the indoor temperature information, but the outdoor information will not be displayed. If there are reset buttons, also try them.

Oct 16, 2010 | Timex TX6490 Wireless Thermometer with...

1 Answer

Outside temperature not showing on ll bean model # 9021u-it


Try removing the batteries from both the outdoor sensor and the indoor unit. I had the same problem and fixed it by doing this.

Sep 28, 2010 | Taylor 1528 Wireless Digital Indoor...

1 Answer

BIOS Digital Wireless Thermometer 312BC SETUP INSTRUCTIONS


I have a BIOS wireless indoor/outdoor thermometer. The indoor base unit doesn't display the outdoor temperature - it is blank - however the other temperatures - humidity, indoor temp, etc., are displayed, What is the problem? We have misplaced the manual so we don't know what to do.

Aug 28, 2010 | Measuring Tools & Sensors

1 Answer

Gas pressure


It depends on the indoor and outdoor temperature and humidity. The low side pressure can be in the area of 135# to 145# with an indoor temperature of 80° and 50% relative humidity, and the outdoor pressure can be in the area of 300# to 330# on a 95° day depending on effeciency rating.
If your asking this to charge your a/c this is not how to charge your a/c.
Charging AC by superheat and subcool
First charging a unit by superheat, this is only for Acs with an orifice or capillary tube.
Optimum superheat is 12° to 15° at the compressor or suction line outside the unit.
Hook up your gages and put a thermometer on suction line (large line), start the AC. Measure the temperature of the suction line and read the pressure on your gages. Theres a temperature scale on your gages for R-22 or R-410A the needle will show you the pressure on the outer scale and if you follow it down to the R-22 or R-410a inner scale that is the saturation temperature for that refrigerant, (you can also use a temperature pressure chart), now read the thermometer, let’s say the suction temperature( the thermometer) is 67° and the saturation temperature (the gages or temp. press. Chart), is 55°, subtract the saturation temperature from the suction temperature, 67°- 55° = 12° superheat.
Charging by Subcooling, this is for Acs with a thermostatic expansion valve, it’s common to see a sight glass on the liquid line (on these units with a sight glass just clear it, when, indoor room is at approximate set point of the thermostat). Optimum sub cooling is 12° to 15° at the outdoor unit.
Hook up your gages and put a thermometer on liquid line (small line), start the AC. Measure the temperature of the liquid line and read the pressure on your gages. Theres a temperature scale on your gages for R-22 or R-410A the needle will show you the pressure on the outer scale and if you follow it down to the R-22 or R-410a inner scale that is the saturation temperature for that refrigerant,(you can also use a temperature pressure chart), now read the thermometer, let’s say the liquid temperature( the thermometer) is 100° and the saturation temperature (the gages or temp. press. Chart), is 114°, subtract the liquid temperature from the saturation temperature, 114°- 100° = 14° subcool.

Dec 25, 2009 | Heating & Cooling

Not finding what you are looking for?
Oregon Scientific Wireless IndoorOutdoor Thermometer with Atomic Clock Mod Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oregon Scientific Measuring Tools & Sensors Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Lawrence Oravetz

Level 3 Expert

9633 Answers

Timllfixit

Level 3 Expert

2210 Answers

Are you an Oregon Scientific Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...