Question about Canon XL2 Mini DV Digital Camcorder
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Well, I hate that when it happens so we changed test-bed computer to Mac. The software runs as soon as two hardware, pc and XL2 is connected physically. I do not have knowledge on prem pro 1.5. but from technician's point of view, if both machines I/O hardwares are ok rest of the reponsibility depending on the program. This is how I would do it. 1. Restart the computer 2. open only the related program and have it ready for connect. 3. turn on XL2 on VCR mode, test make sure it plays few second. 4. connect the firewire. Hope this works otherwise, I will re-install the program and try. Beyond that point, it's good to consult with a local technician for diagnostic of your XL2 first. -James
Posted on Mar 28, 2009
Possible main fuse blown. It's made by littelfuse and is very small but not impossible to replace. It's suggested if you solder a new one on top of the existing blown fuse due to its size. Also ensure all ribbon cables are properly seated or it may result in blowing the main fuse.
Posted on Jul 16, 2010
If you can't find the manual on Canon's website it's probably not a good idea to go elsewhere. Your best bet is to send it in to Canon and have their techs repair it.
Posted on Mar 06, 2011
Tips for a great answer:
Nov 01, 2013 | Canon XL2 Mini DV Digital Camcorder
Mar 06, 2011 | Canon Video Cameras
Mar 27, 2009 | Canon XL2 Mini DV Digital Camcorder
Sep 04, 2008 | Canon XL2 Mini DV Digital Camcorder
Apr 08, 2008 | Canon XL2 Mini DV Digital Camcorder
Dec 30, 2007 | Canon XL2 Mini DV Digital Camcorder
63 people viewed this question
Usually answered in minutes!