Question about JVC AV-56WP74 56" Rear Projection HDTV-Ready Television

1 Answer

Jvc i art pro doe not turn on

I have a jvc i art pro 56 inch projection tv and when i plug in the tv the tv makes a clicking like noise and the speakers make a popping noise and no picture displays and the green light just flashes. can anybody please assist me i can not afford another $450 for repairing my tv

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 59 Answers

The clicking sound is the TV trying to restart itself. It generally attempts this several times before giving up. The blinking code indicates the type of error (error codes are documented in the manual for the TV). The most likely cause is a burned out bulb, but could be something else.
If it is a bulb, it is usually replaceable without a service technician, and at a cost far less than $450.
Good luck.

Posted on Jun 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have older projection JVC i Art pro Tv, it is projecting a double image and i need to know how to fix it easily


if model number is correct the two stk-392-110 chips need to be replaced.

Can you solder?

see photos of board in your set and I can tell you how to get it out and what is needed.

Before you rate this information let me know if you can solder etc.

sd techsd_tech_66.jpg


sd_tech_67.jpg

Jul 25, 2011 | JVC AV-56WP74 56" Rear Projection...

1 Answer

I HAVE A 48 JVC I ART PRO AND IT SEEING DOBLE.


Thats caused by failed convergence ICs and resistors. You can get the JVC AV48wp74 -AV65WP74 cnvergence repair kit from <A href="http://www.tvrepairworld.com">www.tvrepairworld.com</A> the kit contains the ICs , Resistoirs and the cd with repair instructions.

Aug 25, 2010 | JVC AV-56WP74 56" Rear Projection...

2 Answers

Have a jvc i-art pro 56" from 2003 have a red halo surrounding images. what can I do to fix this and where do I acquire the parts? Thanks


Thats aconvergence failure. You can get the AV48WP74 convergence repair kit from www.tvrepairworld.com the kit contains the parts and the CD with detailed instructions for the repair.

Jul 10, 2010 | JVC AV-56WP74 56" Rear Projection...

1 Answer

Red convergence will not line up on my jvc 56 inch i art projection tv model # AV-56WP74. PLEASE TELL ME WHERE CAN I BUY THE KIT SO I CAN FIX IT MYSELF!!!


You need to pull the front grill cover/panel off the front of the tv. Remove screws (4) from back that hold it on, also 2 small ones behind front video input door. Then remove access panel. The ckt board closest to you is the convergence amplifier board. You should replace both amplifiers (stk392-110 or 120) and any burnt/open resistors you find near the amps.(use the same value resistors as the corresponding resistors in the blue amp ckt)

Jul 08, 2009 | JVC AV-56WP30 56" Rear Projection...

1 Answer

52 inch rear projection tv turns off after a minute


try turning off the auto shut off feature in you set up screens . you can find them through the menu button on your remote. scroll through till you find it and turn it off.

Jan 18, 2009 | JVC AV-56WP74 56" Rear Projection...

1 Answer

I have a 56 inch JVC HD TV model# HD-56G647. yesterday when I turned the set on there was a black shadow in the lower hand corner. today it's bigger. i called jvc and they told me to make sure the...


Red light lamp indicator is blicking on my 56 inch mode;# 56G647 tv and the Tv screen is black with no vision of tv and no sound. What sould I do

Oct 17, 2008 | JVC Televison & Video

1 Answer

I ART PRO JVC 56


You will need to replace the convergence iCs there are two of them they are both STK392-110 Ics you will also need the JVC convergence resistor kit. You can get the ICs and resistor kit at the following link and they provide free instalation instructions with pictures. Heres the link.
http://servicemanuals.vstore.ca/

Jul 26, 2008 | JVC AV-56WP74 56" Rear Projection...

2 Answers

I art JVC 46 inche double vision


If you do not have hand soldering skills or know how to use a multimeter, I would suggest to replace the whole assembly.
If you know how to solder you can just replace 2 ICs that are mounted on the big black heatsinks and possibly 1 or more resistors.
Click here to find the entire assembly for your TV.
Good Luck.

May 24, 2008 | JVC AV-56WP74 56" Rear Projection...

1 Answer

Tv turns off by it self


This usually is heat related. Is the filter clean? The fan working? Otherwise there is most likly a "so called" cold solder joint...where the connection on a board is not positively made...often when it warms up the joint will 'open'..disconnect. This needs re-soldering.

Mar 29, 2008 | JVC AV-56WP74 56" Rear Projection...

3 Answers

Jvc television want come on


Reset is done by unplugging the ac cord for a time,then plug
back in...............Please verify model number off sticker on the
                            rear of your tv...let me know.....T.

Oct 22, 2007 | JVC AV-56WP30 56" Rear Projection...

Not finding what you are looking for?
JVC AV-56WP74 56" Rear Projection HDTV-Ready Television Logo

934 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74482 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...