Question about LG SuperMulti Network Attached Storage N1A1DD1 Network Storage Server

Open Question

I replaced hard drive now how I load firmware

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Dell firmware for Seagate SAS harddisk


The firmware for any electronics device tells the hardware how to properly function.


Most devices rarely need a firmware upgrade, however, computer products such as a Seagate hard drive need to have the firmware updated periodically due to computers constantly going through operating system upgrades.


Luckily, you can update your Seagate hard drive firmware with an Internet connection and a few clicks of your mouse.


Connect your Seagate hard drive to your computer if the hard drive is external.


Launch your Internet browser and navigate to the Seagate.com website.

When the site loads click the "Downloads" button.


Click on the hard drive listing you currently own.

This brings up all of the most current downloads for your Seagate hard drive.


The listings of the hard drives have the image, so match your hard drive to the image online if you are not sure what drive you have.


The user manual states what hard drive you currently own also.


If you don't have your owners manual, open "My Computer" (or "Computer") and right-click the hard drive icon and select "Properties."


Here the computer states exactly what model of hard drive you have.


Click the Firmware update and click the "Download" button to launch the download.


Click-and-drag the file into the hard drive if you are using an external hard drive

(open "My Computer," then double-click the removable hard drive icon).


Open the downloaded file and follow the prompts to install the updated firmware.


Hope this helps






Nov 11, 2012 | Dell 300GB 15K RPM SAS 3G 3.5 INCH...

1 Answer

Dell firmware to Seagate SAS


The firmware for any electronics device tells the hardware how to properly function.


Most devices rarely need a firmware upgrade, however, computer products such as a Seagate hard drive need to have the firmware updated periodically due to computers constantly going through operating system upgrades.


Luckily, you can update your Seagate hard drive firmware with an Internet connection and a few clicks of your mouse.


Connect your Seagate hard drive to your computer if the hard drive is external.


Launch your Internet browser and navigate to the Seagate.com website.

When the site loads click the "Downloads" button.


Click on the hard drive listing you currently own.

This brings up all of the most current downloads for your Seagate hard drive.


The listings of the hard drives have the image, so match your hard drive to the image online if you are not sure what drive you have.


The user manual states what hard drive you currently own also.


If you don't have your owners manual, open "My Computer" (or "Computer") and right-click the hard drive icon and select "Properties."


Here the computer states exactly what model of hard drive you have.


Click the Firmware update and click the "Download" button to launch the download.


Click-and-drag the file into the hard drive if you are using an external hard drive

(open "My Computer," then double-click the removable hard drive icon).


Open the downloaded file and follow the prompts to install the updated firmware.


Hope this helps






Nov 11, 2012 | Seagate HDD 300GB ST3300657SS SAS...

1 Answer

Momentus 5400 fde.3 formatting error


Which operating system ?

If windows 7 click start richt click on computer select properties then device manager scroll to your disk (hard drive) expand right click select update drive software

Every Seagate drive requires a few firmware updates during its lifetime.

Seagate firmware must be up-to-date to ensure that the product will run reliably.


Changing the firmware on a Seagate product to a more updated version will improve the product's performance.


Check the Seagate website often for any update available for your drive.

The firmware can be changed with just a few clicks of your mouse on the Seagate Web page.


Click the "Start" button on the bottom-left corner of the screen.

In the window that pops up, click " My computer " or just "Computer."


Another window will show up with an icon for your hard drive.

Right-click the hard drive icon and press the "Properties" option.


This will tell you what model your hard drive is.

For example, your hard drive might be ST31500341AS.


Open your Web browser. Type in www.seagate.com and press "Enter" on the keyboard.

Wait for the webpage to load.


Enter the word "Firmware" and your model number in the search box on the upper right hand corner of the webpage and press "Enter" on the keyboard.


Using the example from Step 1, type in "Firmware ST31500341AS".

Click on the first link that is returned in the search results.


Locate the firmware update. Double-click the update.

Press the "Download Firmware Update Utility" link to start downloading.


Click yes on any pop-up boxes that you may see.

Open the new firmware file by double clicking the file that you downloaded in Complete the installation by accepting all of the default questions that are asked during the installation process.


Hope this helps






Nov 03, 2012 | Seagate Momentus 5400 FDE.3 320GB Hard...

1 Answer

When turning on copier it starts on the start up screen (has a picture of copier). It never changes and says printer is offline for printer as well...


On Toshiba's this is almost ALWAYS a hard drive failure. Toshiba loads the "firmware" or operating system on the hard drive so when it goes bad the copier will turn on or say please wait but that is all. You will need a Toshiba tech to come out and replace the drive as well as load the firmware onto the new drive. You can not simply replace the drive on these machines like you can most other copiers.
Good Luck and Thank You for using Fixya.
WheatlandServices

Jan 31, 2011 | Toshiba E-STUDIO 720 Copier

1 Answer

My PS3 starts up but then says "The hard disk file


Your HARD DRIVE (aka: Hard Disk), located on the left side of the unit, has crashed. You will need to replace the HD.

When you replace your hard drive, you will need to have the latest firmware on a

usb stick. Download the firmware from the playstation official website onto a usb

stick. Once prompted by your system you will need to insert the usb stick into the

PS3. Good luck..



You will need 2.5" Sata Hard Drive.

Jan 26, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

When i turn on the ps3 it says the hard disks file system is corrupted and will be restored press x it loads up then says the same thing


Your HARD DRIVE (aka: Hard Disk), located on the left side of the unit, has crashed. You will need to replace the HD.

When you replace your hard drive, you will need to have the latest firmware on a

usb stick. Download the firmware from the playstation official website onto a usb

stick. Once prompted by your system you will need to insert the usb stick into the

PS3. Good luck..



You will need 2.5" Sata Hard Drive.

Jan 26, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

It comes to the load up but doesn't get to the main screen


Your HARD DRIVE (aka: Hard Disk), located on the left side of the unit, has crashed. You will need to replace the HD.

When you replace your hard drive, you will need to have the latest firmware on a

usb stick. Download the firmware from the playstation official website onto a usb

stick. Once prompted by your system you will need to insert the usb stick into the

PS3. Good luck..



You will need 2.5" Sata Hard Drive.

Jan 20, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

Errors are occuring while I down load the updates on my ps3


Your HARD DRIVE (aka: Hard Disk), located on the left side of the unit, is at fault. You will need to replace the HD.

When you replace your hard drive, you will need to have the latest firmware on a

usb stick. Download the firmware from the playstation official website onto a usb

stick. Once prompted by your system you will need to insert the usb stick into the

PS3. Good luck..



You will need 2.5" Sata Hard Drive.

Jan 19, 2011 | Sony Playstation 3 (PS3) Console

2 Answers

I have a hzd4b with 4 1-tb drives all new. I try to connect to the box to initilize the system but cannot. I believe the firmware is loaded on the hard drives them selves like the buffalo nas solution. ...


petrykja,
I have the same issue as you. I bought an encloser to hold my drives (that i already owned). My firmware is showing 0.38 so I don't think the firmware is housed on the hard drive. However, when I try to upgrade the firmware it says that it can't find the drive to load from. So I think the firmware is first loaded to one of the drives and then to the motherboard. Not sure. Any luck with this wince December?

-Chubby

Dec 29, 2010 | Bell Microproducts Hammer Z-Box HZD4B-1000...

1 Answer

WD 500GB external hard drive won't load on new macbook


Dear Sir,kindly note this problem usually caused by a firmware damage,so you need find a dr company to use tool to repair the firmware,you can contact with me :honglake@gmail.com

Mar 19, 2009 | Western Digital 500GB My Book Pro-External...

Not finding what you are looking for?
LG SuperMulti Network Attached Storage N1A1DD1 Network Storage Server Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you a LG Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...