Question about Ryobi Rht-2660DA Quik Fire Hedge Trimmer 26Cc
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Just buy a file and push 3 or 4 down strokes down the same slope of the cutter toward the sharp edge. Never file on the flat top of the cutter, only on the slope. Support the frame using a saw horse or pick-up bed. The support makes the file cut the metal better. You can do the same thing with chain saws. You just need the file that fits the cutter. You just hold a consistant angle and count out the same number of strokes. Also, clean out junk between the moving parts, tighten any loose screws, and drop a few drops of 3 in 1 oil between the moving parts. Having things sharpened at a shop is inconvenient and expensive.
Posted on May 24, 2009
You may need to take it to a professional to sharpen. It may have some trash in between the blades keeping it from not cutting. Plus when you use it try spraying some WD40 on the blades to help them move and cut.
Posted on Sep 29, 2009
SOURCE: Please tell me exactly how
If you go to your local home center in the lawn care section they will have these little plastic bottle of two cycle engine oil they treat a gallon of gas if this is your only machine that mixes gas and oil you probably will not use a whole gallon in a season and you should not keep the mixture for to long it will not last. So doing some simple math and looking at back of container try to mix the ratio down if a whole gallon is not needed. Good Luck...
Posted on Sep 05, 2011
full choke on , push petrol bubble 5 times then pull starter cord., with luck it will kick in to life after a 20/30 secs put on half choke , run again for 30 secs the no ckoke.
The main problem with Ryobi products is that they flood very very easly. So the more time you try and pump petrol into the carb the more it will flood . If that happenes then choke off and switch off and then just pull starter cord for about 30 secs then switch on and it could start if not prime it again as above good luck
Posted on Jan 19, 2012
Tips for a great answer:
on Jul 29, 2010 | Garden
Aug 06, 2012 | Ryobi Rht-2660DA Quik Fire Hedge Trimmer...
Dec 24, 2011 | Ryobi Garden
Aug 15, 2011 | Ryobi 30cc 17" String Trimmer Zrry30530...
Apr 08, 2011 | Garden
Jan 21, 2011 | Ryobi Garden
Aug 30, 2010 | Garden
Jul 28, 2010 | Ryobi Three Trimmer Combo
Sep 26, 2009 | Ryobi Garden
53 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: