Question about HP Pavilion dv2000t Notebook

2 Answers

HP Webcam not working.

I load it up and get this message:
MediaSmart Webcam cannot connect to this device (HP Webcam). Please select another capture device within Settings or close any application that may be using this video device and then restart MediaSmart Webcam.

It will not let me click on the 'Settings' button. I don't have anything else running and this is the first time using the webcam. My husband has the same laptop and his works just fine.
Thank you in advanced!

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hp pavilion dv2000 is a piece of sheet...coze it has must vulnerable web cam attached. how can HP be so careless about its product? this is simply rediculous.**** HP.....else HP has to pay for all the costumer against vulnerable ***-cam. last but not the lest **** HP!!!!!!!!!!!!!!!!

Posted on Jul 17, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

If it an external web cam you need to plug in to your computer , then install its drivers through CD.

Posted on Jun 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant get my hp PAVILION DV6000 built-in webcam to work.


try using a real HP driver yet?
downloaded from whom, most non HP sites are virus pits from H3LL.
know that first.
finding drivers for obsolete systems is super hard work.

Pavilion dv6000 (is that the full partnumber or the useless series number)? post the service tag for 10x better answers.
if at HP.com (where you should have gone first) they demand that first. that is because, there are 50 LT in that series.or more
and guess what they all dont use the same chips nor cameras.

carbon date,,,, 2006 ,2007?
just about 10 years old and support ends at 10 years old
XP is dead now for 3 years why run XP
XP must have SP3 loaded, service pack 3 or USB is no good and vast other things super bad.. (old old history that)


only this matters, see those xx below, all facts here matter.
1,2,3 , all do. to match drivers; to OS. just 1 example here of 1000
9000-ppec2icix4tk32ykqb2dko55-5-0.jpg here is the dead files on this LT
deep dead.
http://h30434.www3.hp.com/t5/Printers-Archive-Read-Only/Windows-7-Upgrade-Guide-for-dv6000-dv9000-models/td-p/179816


if you read the real service manual on any HP laptop made
you learn fast there are vast variances in chips used.
and matching drivers same,
some have 3 -4 wifi chips different. in one model.
like this DV6000-1234, see that 1234, vast models exist.
world wide in fact.

Apr 07, 2017 | HP Pavilion dv6000t Notebook

Tip

Solution to the HP Purple Web Cam Issue



This document is located on HP's web site concerning purple tint on certain web-cams.

This document pertains to certain HP Notebook PCs with Windows 7.
When using an HP ENVY 15 notebook PC webcam in low light conditions, images on the webcam may have a purple tint.The ENVY 15 Series webcams include night vision technology that is designed to operate in normal lighting conditions and optimized to operate in low and zero light conditions.The webcam night vision feature includes two Infrared (IR) lights located on each side of the webcam and behind the display panel bezel.
Low to zero light conditions will cause the webcam IR lights to activate. The IR lights provide illumination for low and zero light conditions and help prevent fuzzy images that are typically associated with operating standard webcams in low and zero light conditions.
Turn off the webcam IR lights. While some degree of purple tint may be present under low light conditions, turning off the webcam IR lights will reduce and in certain cases eliminate the purple tint.
  1. Select Start > All Programs > HP > HP MediaSmart > HP MediaSmart Webcam .
  2. In HP MediaSmart Webcam, select Settings > Display > Advanced Settings , and then click the Camera Control tab.
  3. Select the Low Light Compensation check box, and then click Apply .
  4. Click OK .
NOTE:Disabling the webcam IR lights will cause display images to appear darker in low and zero light conditions.

The webcam IR lights are also available on other webcam programs.
Refer to the software Help for additional information.
This document will be updated if additional information becomes available.

on Jul 28, 2010 | Computers & Internet

1 Answer

Cyberlink Youcam


The Cyberlink software for HP notebooks is within the HP MediaSmart Webcam software.
For HP MediaSmart Webcam v4.2 HERE and for HP MediaSmart Webcam v3.1 HERE.

Aug 19, 2011 | HP Computers & Internet

1 Answer

I just bought a Compaq Presario CQ56 115DX yesterday, and at the top, right above the screen, is a black rectangle which is suppost to be a webcam. I've been trying to get it to work, but it keeps...


  1. Click Start , enter Mediasmart , and click HP MediaSmart Webcam when it becomes available in the list.
  2. Once the application opens, you should see an image produced by the webcam.
  3. Click the Capture button to test the webcam's video quality. c01977625.jpg Click the Capture button again to stop the recording. In the right-column, double-click the video thumbnail to replay the video.
  4. Click the Snapshot button to test the webcam's photo quality. c01977626.jpg Double-click the photo thumbnail in the right-column to view the photo.
  5. Click any of the other categories to further test the webcam's capabilities with HP MediaSmart Webcam. c01977627.jpg
After successfully completing the tests, you may need to configure the webcam settings before using other webcam applications. To adjust the webcam settings, follow the steps below.
  1. Click the c01977628.jpgSettings button.
  2. c01977629.jpg 1 - Click the Display tab. 2 - Slide the black circle icon on the Brightness and Contrast bars to alter the webcam image. 3 - Click Advanced Settings to adjust other settings as needed.
  3. Click OK to save your settings.
Sometimes the webcam image will look different when used with a third party instant messenger application. If you need to adjust the webcam settings again, repeat the steps above with HP MediaSmart Webcam.
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=52039&tmp_task=solveCategory&lc=en&dlc=en&cc=us&site=null&product=4308201&key=null For more Infromation visit this website :

Jun 19, 2011 | Computers & Internet

4 Answers

I have a presario cq62-225nr i was wondering if it had a webcam installed if so how do i turn it on?


From looking at several product pages it seems that the particular model you posses does not come standard with a webcam. However, an external USB webcam can be purchased from almost any electronics retailer (ex. BestBuy, Futureshop, etc. depending on location) for as little as $15 USD.
These webcams are very easy to install and utilize and typically come with everything you need to get started (i.e. cables, instructions and drivers).

May 04, 2011 | Computers & Internet

3 Answers

Webcam is part of laptop, how to use


Launch the MediaSmart Software WebCam features, to open the MediaSmart software webcam feature, double-click the MediaSmart icon c02015793.jpg on the desktop and then select the webcam icon c02030254.jpg from the MediaSmart task bar.

Mar 08, 2010 | Compaq Presario CQ60-212US Notebook

1 Answer

How do I save a webcam video using HP Pavillion Mediasmart


First of all you need Windows Movie Maker .

  1. You need to click on Capture From From Device from the Movie tasks.
  2. Then you'll see a form that asks you which device you want to capture from. Choose your Webcam device
  3. Click on "Next"
  4. Second, you'll have to give the video a name and say what location you want to store it in.
  5. Click on "Next"
  6. Click on "Next"
  7. Then you'll see yourself on a screen.
  8. Click on "Start Capture" and then when you've finished click on "Stop Capture"
  9. Click on "Finish"
  10. It will show your video and then you can do whatever you want with it.
Hope this works out fine.

Nov 24, 2009 | HP Pavilion dv9000z Notebook

1 Answer

HP Mediasmart Webcam - cannot connect to device (HP HDX16)


it could be that the software for the cam does not support the new upgrade..

Jul 12, 2009 | HP Pavilion dv2000t Notebook

1 Answer

No connection


try to all usb ports on cpu .reinstall your cam drivers to after removing old drivers.

Feb 10, 2009 | HP Computers & Internet

Not finding what you are looking for?
HP Pavilion dv2000t Notebook Logo

583 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18411 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

pontelemon
pontelemon

Level 3 Expert

538 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...