Question about HP PSC 1610 All-In-One InkJet Printer

1 Answer

Hp 1610v Does ont do anything,help

Printer does not work,when I turn it on the on flashes and the ! point flashes and does not do anything .The ink cartridge went to the left and will not move.Message I get is No Mech mode. whats going on.Please Help.

Posted by on

1 Answer

Re: Hp 1610v Does ont do anything,help

  1. Verify that the control panel overlay is not holding the Setup button down.
  2. Verify that nothing is stacked on top of the unit that might put pressure on the Setup button.
  3. Disconnect the power cord from the back of the unit to turn off the all-in-one.
  4. Press and hold the Setup button and connect the power cord to the back of the unit to take the unit out of No Mech Mode. Release the Setup button.

If you have completed all of the steps listed above and are still experiencing a problem, service your product.

Posted on Nov 04, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

My color cartridge has been filled and placed back into the printer and the light is still flashing with "remove and check the color cartridge" I have followed all steps to clean and re-install...

You need to bypass the out of ink message. If you have a parallel port, you can turn off the "bidirectional support" in the printer section of the control panel

Or you screwed yourself by waiting too long
The ink acts as a coolant for the cartridge. If you waited too long to fill it and burned it up, you will destroy the TSR (thermal sense resistor) and the cartridge is toast.

Jan 27, 2011 | HP PSC 1610v All-in-One Printer

1 Answer

Cant get my 1610v to scan. Can't find the

turn on/off, unplug, wait a minute, plug back in, should reset.
go to application folder for your computer, dbl click icon for make of printer, for settings, check to ensure everything is order. go to the scanner settings.
lastly, check make of printer trouble shooting web site for more information. hp has an awesome site for trouble shooting
hope this helps, good luck.

Apr 29, 2010 | HP PSC 1610v All-in-One Printer

1 Answer

HP PSC 1610v,which side takes black and which side color. ink cartridge slots that is.

Download a manual from the link given below: for Free.
you would be asked for your email address.
It is in PDF which means you need Adobe Acrobat Reader
Save it
Read Chapter 12 to answer your question.

Hope this will help you.
If it is helpful, please give a rating.

Dec 14, 2009 | HP PSC 1610v All-in-One Printer

2 Answers

What type of ink does an HP PSC 1610xi All-in-One printer use?

Here is the HP site that list the ink cartridges:

Click on this link or copy and paste the complete link into your browser.
If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe

Jun 11, 2009 | HP PSC 1610v All-in-One Printer

1 Answer

Can u help please

Click on the link to download the software for HP PSC 1610v All-in-One Printer. Select the operating system of your computer first then click on the software/driver.

HP PSC 1610v All-in-One Printer

Sep 19, 2008 | HP PSC 1610v All-in-One Printer

1 Answer

Every other line prints only bottom half of text.

I have a psc 2355 printer which only prints half of text then the next lines are ok then it repeats only printing half text. I removed my ink cartridge and wiped the ink ports with a tissue heavily moisten with water. Repeated this several times and then gently dried with a tissue. The problem was fixed!!

May 08, 2008 | HP PSC 1610v All-in-One Printer

1 Answer


If you lift the front center of your printer, you will be able to see where the ink cartridge is located.

Nov 12, 2007 | HP PSC 1610v All-in-One Printer

1 Answer

HP PSC 1610V All in one printer

Try unplugging the power cord on the printer, hold the power button in for a few seconds, plug the power cord back in and turn printer back on. That should clear the error if it is stuck in the printer's memory.

Oct 23, 2007 | HP PSC 1610v All-in-One Printer

1 Answer

Problem with ink cartridge

There is something broke with the piece that keeps it in place. You need to take it out and look real close to how it works. Look at how the color works and compare the two.

Sep 23, 2006 | HP PSC 1610v All-in-One Printer

Not finding what you are looking for?
HP PSC 1610 All-In-One InkJet Printer Logo

Related Topics:

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts


Level 3 Expert

93802 Answers


Level 3 Expert

7983 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides