Question about Honda Pressure Washer PSI 3000

2 Answers

Timing a 13 hp GX 390 Honda engine

I don't see any timing marks on the two counter-balance weight cams, but assume they need to be in sync with the piston.  How is the timing accomplished?  Thanks!

Posted by on

  • David Wistey
    David Wistey May 11, 2010

    I posted as having a problem timing a Honda engine.  Don't know why it was listed under a problem with a pressure washer.


×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 174 Answers

I believe it is either one but if you are not sure, stick a screw driver in an see if it comes out with oil on it. Does one not have an oil level stick attached to the cap?

Posted on Jun 27, 2009

  • firehead Jul 06, 2009

    If you will e-mail me at firehead@rogers.com I can send you some literature that should help

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There are 2 oil caps at the bottom. 1 is black, 1 is white. What oil goes where? honda gx340 pressure washer

Posted on Jun 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ihave a honda generator with a gx 390 motor volt drops when i put a load on it what could it be


Voltage regulator, carbon buildup in the cylinders, the carburetor may need overhauling, engine governor may have a stretched spring, Spark plug may need replacing, Timing may be off, air filter may need changing, and lastly, your load may exceed the ability of the generator.Checking this list will uncover the loss of power

Oct 20, 2016 | Honda Electrical Supplies

1 Answer

I installed a new GX 390 Honda engine in a Toro 413 TX machine. Motor starts, idles and full throttle fine, but when hydraulics,i.e. drive is engaged, motor dies.


you have a dingo, ugh
I would suspect a bad pump or wheel motor if the rpms are set correctly and no safety switches are causing it to die...

Dec 26, 2013 | 13 HP Electric Start GX390

1 Answer

I am looking at buying the following 2006 Landa PG4-3500 PSI washer Used 283 hours, 13 HP Honda GX-390 3.8GPM, pump 1300RPM Comes w/ wand, hose,& 4 tips What would this washer be worth?


It has quite allot of hours on it so it has been used extensively. 283 hours on a pressure washer pump is about 27% of it's life expectancy. The good news is that it has a Honda engine. If it runs perfectly, looks like it has been taken care of, and has plenty of pressure, I would pay no more than around $400 for it tops. You are the buyer and the seller is wanting to sell. You have the upper hand in this deal. Offer $300 and then bargain.

Jan 06, 2011 | Honda Garden

1 Answer

We need a manual for our pressure washer 3700 PSI, 13 HP-GX 390. How do we get this?


The numbers you have listed are for the engine, Honda doesn't actually make pressure washers but makes the engines. If you are looking for the manual on the pressure washer itself you are going to have to find some other numbers that should be listed on the frame of the machine.

Nov 01, 2010 | Honda Garden

1 Answer

I have a Honda GX 390 with 13 hp power washer. Overheating.


Make sure the engine is not full of paint or dust debris in it's cooling system. If the fuel mixture setting is very lean, it can cause overheating. Make sure the fuel tank vent is open to prevent fuel starvation. Does the engine seem to be running at full operational speed? If not, it will be short on developed horsepower. Make sure the water source is not partially shut off. Hope some of this helps!

Feb 25, 2010 | Air Tools & Compressors

1 Answer

Honda gx 390 only starts when it feels like it


Sometimes you have to lower the air pressure in the tank to allow it to run. The back pressure from the compressed air in the compressor head overcomes the pressure created in the engine at the slow RPMs you are able to pull while attempting to crank it.

Aug 13, 2009 | Honda Quincy 17 - Gallon Air Compressor...

Not finding what you are looking for?
Honda Pressure Washer PSI 3000 Logo

Related Topics:

1,988 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Garden Experts

John Trevino

Level 3 Expert

1383 Answers

JOHN LAPIER

Level 3 Expert

2428 Answers

yadayada
yadayada

Level 3 Expert

76132 Answers

Are you a Honda Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...