Question about Nikon D3000 Digital Camera

1 Answer

When i press flash icon the display says "not available in these settings"

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Nikon Master
  • 102,366 Answers

The flash is not available in certain exposure modes. The camera decides whether to use the flash in Auto mode, and the flash cannot be used in Landscape mode, for two examples.

Try switching the camera to the Manual exposure mode. Can you use the flash then?

Posted on Apr 13, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to set and remove alarm set


Turning on/off the alarms

To turn alarm 1 on/off, follow these steps:
  1. Turn the system off
  2. On the radio, repeatedly press the Alarm Mode button until the desired alarm mode indicator below "Alarm" is displayed. The music note indicates radio and the sound waves indicate the alarm tone. If no icons appear on the display, that means the alarm is turned off
wr_alarm_set_icon_both.gif Radio and tone
wr_alarm_set_icon_radio.gif
Radio only
wr_alarm_set_icon_tone.gif
Tone only
wr_alarm_set_icon_none.gif
Alarm off
To turn alarm 2 on/off, follow these steps:
  1. Turn the system off
  2. On the radio, press and hold the Alarm Set button. "Alarm" flashes on the display
  3. While holding Alarm Set, press the Alarm Mode button once. "Alarm 2" flashes on the display
  4. Release Alarm Set, and repeatedly press Alarm Mode until the desired alarm mode indicator above "Alarm 2" is displayed. If no icons appear on the display, that means the alarm is turned off. The "Alarm 2" indicator will continue to flash on the display for 10 seconds. When the flashing stops, alarm 2 is set
wr_alarm2_set_icon_both.gif Radio and tone
wr_alarm2_set_icon_radio.gif
Radio only
wr_alarm2_set_icon_tone.gif
Tone only
wr_alarm2_set_icon_none.gif
Alarm off

Jul 20, 2014 | Bose Wave Radio

1 Answer

Set the time


Apparently, you need to be a rocket scientist to set the time on this radio. Check the video at the link below. The lady says it's the most difficult clock radio she has ever used. Other than that, here's the time set from the instruction manual, and I quote from this site:

1. Press the "set" button, the ":" will flash on the display
2. Press "REV" or "FWD" to set the time
3. AM or PM icon will show beside the time.

TIP No icon will be flashing if all selectors are set. If you see any icon flashing on the display, press the SET button repeatedly to confirm everything is set correctly.


Honda Parts.

May 28, 2012 | GE 74801 Clock Radio

1 Answer

How to get it off vibrate, i lost manual


Press the Mode button until the Call Setting icon flashes on the screen. The current setting ("01"
vibrate + ring, "02" vibrate only or "03" ring only) will be displayed. Press the Channel Up or
Channel Down button to change the call setting.

More programming details (with pics) are available in the user's manual which can be downloaded HERE

user666.jpg

Nov 20, 2010 | Cobra microTALK LI6000-2 (14 Channels)...

1 Answer

Not able to choose between flash settings


Take the camera out of the AUTO or Easy (heart) mode. In these two modes, only Auto is available for the flash.

Feb 23, 2010 | Canon PowerShot SX110 IS Digital Camera

2 Answers

Camera fails to flash every time we take a picture


1.Turn off the camera.
2.Install a set of new or fully charged batteries into the camera. then turn it ON
3.Press the Flash Status button to scroll through the flash options until Fill Flash (the lightning bolt icon alone, with no other letter or symbol) is displayed. This forces the camera to use the flash. a86196b.jpg
4.Take a picture. [If flash still doesn't work contact Kodak support line 1 800 235 6325 (23KODAK)]

Nov 16, 2009 | Kodak EasyShare C875 Digital Camera

2 Answers

How do I stop the Service Icons flashing on the Gilera Fuoco instrument panel? Ta


on the x9500 that uses the same engine there's a reset button to press after a service hidden under a front panel, on some of the other Piaggios it's reset by using bottons on the speedo. so sorry I can't actually tell you on this model, but it will be along those lines.

Jul 21, 2009 | Gilera Nexus 500 Motorcycles

1 Answer

I have a 'relaxed nature sounds lcd clock' with no instructions


Moderately difficult, but not impossible. ;) I picked up this clock @ second hand store with no instructions and was able to figure it out how to set it in about 15 minutes. I liked the calendar feature on the face and the LCD (as opposed to LED because I prefer my bedroom dark when I sleep).
When setting this clock, one of the keys is to pay attention to the the icons displayed on the face toward the lower left. Default "MODE" is time set. To set the time: Press "SET" followed by either "HOUR" or "MIN" while the display is flashing to increment the hours and the minutes to the correct time. As previously state, the default "MODE" is time set.
Pressing "MODE" one time accesses a secondary clock that you might use if you regularly travel to another time zone (new icon w/ 2 clocks appears). Setting the secondary clock uses the same method above.
Pressing "MODE" a second time accesses the first alarm setting (alarm clock icon starts flashing). Same method to set.
Pressing "MODE" a third time accesses the secondary alarm setting (second alarm clock icon appears and begins flashing). Same method to set.
Pressing "MODE" a fourth time accesses a timer (hourglass icon appears). Same method to set.
Pressing "MODE" a fifth time allows you to set the calendar (calendar year appears where the digital clock display was). Press "SET" to change the date: "HOUR" increments the month; "MIN" increments the day; "MODE" increments the year. Press "SET" again to exit.
Pressing "MODE" a sixth time returns to the default time set mode.
I hope this helps someone! God's blessings in Jesus Christ! ~Thomas

Mar 09, 2009 | Audio Players & Recorders

1 Answer

Lost my manual and cant figure out how to set the time. Any help out there. Thank you


From the user's manual

Setting the Clock
1 Turn the Mode control until the clock icon is highlighted
with brackets .
2 Press the Mode control. The clock icon and time display will
flash.
3 Turn the Mode control to adjust the time.
4 Press the Mode control again to set the time. The display
reverts to its previous mode and the new time is set.
Note: The clock can display time in either 12 hour or 24 hour
format. To change the time display turn the mode control to
highlight the clock icon with brackets . Press and hold the mode
control for 5 seconds. The display will show “12H” or “24H”. Turn the
mode control to select the time format you want, then press the
control.

Mar 08, 2009 | Boston Acoustics Duo-i Horizon Clock Radio

2 Answers

I can't set the clock


I had the same problem. Looked here for help and found no solution, so dug through the attic till I found the manual. Thankfully I had kept the box. Here's the instructions from the manual:

Setting the Time
  1. Press the SET button, the ":" will flash on the display.
  2. Press REV or FWD to set the time.
  3. AM or PM icon will show beside the time.
TIP: No icon will be flashing if all selectors are set, if you see any icon flashing on display, press the SET button repeatedly to confirm everything is set correctly.

Sep 13, 2007 | Thomson RP5600 Clock Radio

1 Answer

Flash pops up but does not flash


Turning the Flash Off and On: 1. With the camera in any user set, repeatedly press the Flash/ISO button on the lens barrel until the flash cancel icon (a lightning bolt in a circle with a slash through it) is displayed on the control panel and screen. 2. When finished, to return to the default setting, press the Flash/ISO button until AUTO and the lightning bolt icon are displayed on the control panel and no flash icon is displayed on the screen. If it still doesnt help: 1. Check that batteries are fresh. 2. Check that camera hasn't been set for no-flash mode. 3. Give the flash time to charge before pressing shutter.

Sep 07, 2005 | Nikon Coolpix 5700 Digital Camera

Not finding what you are looking for?
Nikon D3000 Digital Camera Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nikon Cameras Experts

kakima

Level 3 Expert

102366 Answers

Steve

Level 3 Expert

3287 Answers

Ric Donato

Level 2 Expert

225 Answers

Are you a Nikon Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...