Question about Dell OptiPlex GX260 PC Desktop

1 Answer

This device cannot start. (code 10) audio

In device manager device driver has yellow mark on it i tried all drivers no luck

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 231 Answers

Check with support.dell.com for the drivers, but there may be another issue with that machine.
The Optiplex 260 has a 97% failure rate due to some bad capacitors which were sold at the time. Pop open the case and look for swollen or leaking capacitors on the motherboard - this may be the actual issue. These can be replaced at an electronics repair shop or by swapping out the motherboard.
Here is an article which will help you identify the problem better
http://hothardware.com/News/Dell-Blames-97-Optiplex-Failure-Rate-on-Everyone-Else/

Posted on Apr 13, 2014

Testimonial: "thanks for quick reply its gx280 not gx260 sorry for miss writting"

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: reloading software, Hard drive replacment

i hope u re install your operating system,
after the re installation u did not install the drivers that is the reson, best way u buy an ethernet card and try to get net connection and down load the drivers from dell.com ,then remove the card ,thats it.

Posted on Jan 15, 2008

IB4G2008
  • 3587 Answers

SOURCE: USB drivers

ahuh..remove that usb controller, and then do a hardware scan for differences should work well

and by the way, got backup for that Dell?

Posted on Feb 20, 2008

  • 41 Answers

SOURCE: dell

if you have the dimension 4600 , you can find all the drivers on the website support.dell.com, its very simple , easy and free to download

Posted on Apr 21, 2008

dealt_soul
  • 296 Answers

SOURCE: cant find ethernet driver

Try the program Driver Max. You can download it for free and update needed drivers.

Posted on Mar 17, 2009

  • 18 Answers

SOURCE: cannot fix code 28 for network controller for dell1525 laptop

If you are getting a code 28 then you will need to download a new driver on another computer for the network card. If you have a wireless adapter that you can connect to the computer and your router has wireless capability then that could work as well but you will need to get a new driver on to that computer some how.

Finding the driver will be easy though. You can go to the computer's manufacturer website, or the website of the network card's manufacturer and search for it there. Shouldn't be too hard to find but if you can't find it let me know and I will get you a link.

Posted on Apr 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a nec vy16f/rf-r notebook. i have tried to install realtek ac 97 audio drivers but it still shows yellow marks !


if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question / exclamation? ! mark or a red X Right click to reinstall drivers or if you don't have a disk with the sound drivers you need download the drivers

Download the driver software by

http://download.cnet.com/Realtek-High-Definition-Audio-Codec-Windows-Vista-Windows-7-32-bit/3000-2120_4-10788600.html free sound drivers

http://download.cnet.com/Realtek-AC-97-Driver-Windows-98-Me-2000-XP-2003/3000-2120_4-10238712.html
Realtek AC'97 Drivers & Applications. The package includes: Driver/Application Setup Program; RtlRack for Win98/Me/2000/XP and AvRack for Win95/NT4; Realtek Sound Effect Manager. DirectX 8 is required to enable advanced features.

http://download.cnet.com/Realtek-AC-97-Driver-Windows-Vista-Windows-7/3000-2120_4-10962344.html

http://www.boxdrivers.com

using this link you will be able select your drivers


click start control panel sounds and audio volume advanced speakers make sure you have selected the

(appropriate speakers) also audio you will find 3 drop down lists make sure you have the correct settings there

click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it


hope this helps

May 17, 2012 | Computers & Internet

1 Answer

When install realtek AC97 Audio, then have a message from my pc "this device cannot start (code 10)" what I can do about that, thanks in advance!


(CODE 10) no drivers
if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound video and game controllers you might see a yellow question exclamation mark? ! or a red X Right click to reinstall drivers

hope this helps you

Oct 10, 2011 | EPoX EP-8RDA3I Motherboard

1 Answer

I have CODE 10 on my Realtek PCIE GBA Family controller


code 10 no driver has been intalled for this device
if this is for an internet connection
you will have to open up your network connections click start control panel network connections this may vary depending on your operating system look for local area connection if you see a red x or a yellow exclamation or question mark ! ? you will need to update or install the driver or it could be firewalled or you could click start control panel administration tools computer management device manager look for network adapters + expand Ethernet driver if you see a yellow question exclamation mark or a red X you will need to update/reinstall the driver for the device if you computer came with a motherboard disk the driver could be on it
the drivers might be installed properly for this device

click start control panel administration tools computer management device manager scroll through all of your devices if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver
if you can see your usb device but its not working sroll to Ports(Com&Ltd) right click to update driver if you computer came with a motherboard disk the drivers could be on it

or you might have to download one
http://download.cnet.com/realtek-rtl8139-810x-family/3000-2112_4-82823.html

http://download.cnet.com/realtek-rtl8139-810x-family/3000-2112_4-96337.html
if these driver packages aren

Sep 15, 2011 | Computers & Internet

1 Answer

This device cannot start. (Code 10) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available. I get this code when I look at the...


code 10 no drivers installed
if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question exclamation mark? ! or a red X Right click to reinstall drivers
if you need more help with this post a reply
hope this helps you

Aug 15, 2011 | A D S Computers & Internet

1 Answer

I have a canon ZR960 DV camcorder. I've used it several times in the past to upload to my computer (windows XP service pack 3) via firewire with no problems. After my trip, my computer recognizes...



here is a general look at the drivers and how to update them
if your computer came with a motherboard disc the drivers could be on it
click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or
if you can see your usb but its not working
ports(com&lpt)right click update driver also
click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you should see a yellow question mark?
right click to reinstall drivers
if you can see your usb drive but its not working
ports(com&lpt)right click update driver if this fails to fix the problem
check the USB leads that attach to the motherboard usually red white green black make sure they are securely seated and have no dust build up on them dust will cause static and a lot of unforeseen problems for a computer and its parts also
scroll to disk drives if you can see your drive + to expand right click you should see options update driver disable uninstall scan for hardware changes
select properties you should see options in the general tab to troubleshoot policies volumes driver and details under the driver tab you will have the options to check the driver details update driver rollback driver or uninstall
hope this helps

Apr 30, 2011 | Computers & Internet

1 Answer

Yellow question mark on high definition audio bus at device manager, already installed driver dvd package with motherboard.


if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers

Apr 20, 2011 | Computers & Internet

1 Answer

I need the driver for the usb to vga converter. where can i get it?


if your computer came with a motherboard disc the sound drivers could be on it Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! red x right click select reinstall drivers
or you could try some of these

http://majorgeeks.com/SiS_UniVGA5_Graphics_Driver_For_Windows_7_d6264.htmlif your computer came with a motherboard disc the sound drivers could be on it click start control panel administrive tools computer management device manager scroll to sound,video and game controllers you might see a yellow question mark? Right click to reinstall drivers Click start control panel administrive tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! red x right click select reinstall drivers hope this helps http://majorgeeks.com/SiS_UniVGA5_Graphics_Driver_For_Vista_d5611.html
http://majorgeeks.com/SiS_UniVGA5_Graphics_Driver_For_Windows_7_d6264.html

http://majorgeeks.com/SiS_UniVGA3_Graphics_Driver_d4401.html

http://ati-catalyst-drivers.en.softonic.com/ Optimise your ATi graphics card

Mar 31, 2011 | Manhattan HiSpeed USB 20 to VGA Converter...

2 Answers

Code 10


If you run into the error "This device cannot start. Code 10? (often followed by a driver identifier, for example "This device cannot start. Code 10 in audio driver"), here is what it means.

The Windows error "This device cannot start. Code 10? or "This device cannot start. (Code 10)" is a hardware error that most commonly means that you have a bad, missing, or incompatible device driver. So, for example, "This device cannot start. Code 10 in audio driver" means that you have a bad or missing or incompatible driver for your sound card.

The technical explanation for this message, according to Microsoft, is this:

"If the device has a FailReasonString value in its hardware key, that string appears as the error message. The driver or enumerator puts this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message:

This device cannot start. (Code 10)"

What does that mean in plain English? It means that if the device which is throwing the error has added its own custom error text to your Windows system when the device was installed, then when the device encounters an error, you will see the custom error message specific to that device. But if it doesn't have its own custom error message, then Windows uses its own generic error message for devices, which is "This device cannot start. (Code 10)"

Microsoft recommends that when this happens, you click "Update Driver" to update the drivers for the device. You can also start the Windows troubleshooting wizard by going to the general properties tab of the device, and clicking on "Troubleshoot".

Before doing this, be sure that you have the correct and most up-to-date versions of the driver(s) for that device. You can also try uninstalling and reinstalling the device, using the disk which came with it.

Finally, you can go to the website of the device's manufacturer, and check their downloads or support section for current, up-to-date drivers.

Mar 15, 2011 | Computers & Internet

2 Answers

I am unable to hear sound after getting windows reinstalled. Can anyone help me?


you need to install sound driver
go to device manager
at device manager there are yellow mark (?) or (!)
insert your motherboard cd driver
and install sound driver
the other way is at device manager right click at yellow mark and chose update drive, then follow instruction until finish and the yellow mark at device manager disappear

try to play sound

i hope this helpful
thank you for using fixya

Feb 23, 2011 | ASUS P5RD2-VM Motherboard

Not finding what you are looking for?
Dell OptiPlex GX260 PC Desktop Logo

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...