Question about Health & Beauty
Yesterday when I was riding my Rascal Scooter, I let go of the throttle but the scooter didn't stop like it should have. I had to turn the key off to get it to stop.Now it won't start up.I figure I must have blown a fuse or circuit breaker but can't figure out where one is located.I traced all the wires I could find, under seat,etc.
What happen is the the area where the set bolt is broke, won't start because it still thinks you are trying drive, cause it is no longer centered or the return spring broke same result though. Scooter Doctor App
I’m happy to assist further over the phone at https://www.6ya.com/expert/bill_bcbb89783b08c489
Posted on Apr 14, 2016
If the throttle is stuck a little bit then it may not let you start it while the throttle is on
Posted on Apr 17, 2014
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: lil rascal stopped again
make sure you hands are not touching the forward or reverse lever when you insert the key. many times if you have your finger or thumb touching the lever just a tid, the scooter will only move a little then stop, or not work at all. this is a safty. Usally I change out the throttle pot and the Key switch (speed pot) together. As for the price, He didn't over charge you if the 150.00 included his labor. Ask if he can replace the throttle if the product is less then 30 days old. But be prepaird to pay shipping and his labor for replacing the first one.
Posted on Sep 07, 2009
On some scooters it is possible to change the polarity of the motor. If its a two brush motor (most are) you can just swap the red and black wires around in the connector plug for the motor. Make sure you get the right wires if you do this but I have to point out that there is obviously a problem with the scooter and I would strongly advise you to get it looked at by your local dealer as the problem is potentially serious and may cause other problems aswell. I cant really understand why it would only go backwards. May be a throttle pot problem or main controller fault. Either way, as I said, best get it looked at as even if you do swap the wires, it is most likely that the scooter will only travel forward at the usual speed for reverse, normally 2mph! Hope this helps...
Posted on Mar 19, 2010
Visit:WWW.ALLDATASHEET.COM .type in your info you require in the correct boxes & you will locate it.& you will find everything you need there as it is all data.
Posted on May 13, 2010
most rascal 235 and 245 scooters come equiped with power seat height control. you turn the key to the left and then the throttle lever becomes the seat height controller. the seat motor is ditectly uuder front of seat post. if it will not run follow wires to see that they are plugged up good.
Posted on Oct 03, 2010
Obtaining a 4-wheeled front section is the best way to improve stability. The 3-wheeled front section on rascal 235 and 245 scooters easily detaches and interchanges with the 4-wheeled front sections(235 models are a little shorter (less legroom).
Posted on Oct 03, 2010
Tips for a great answer:
Apr 10, 2018 | Health & Beauty
Apr 09, 2018 | Health & Beauty
May 29, 2015 | Health & Beauty
Jan 15, 2015 | Health & Beauty
Oct 12, 2014 | Health & Beauty
Sep 24, 2010 | Golden Technologies Golden CompanioN II -...
Jun 09, 2010 | Golden Technologies Golden CompanioN II -...
317 people viewed this question
Usually answered in minutes!