Question about Lexmark X2670 All-In-One Printer

Open Question

Thinks it has a jam but can't find one

I have never had this issue before but my printer tells me there is a jam but I cannot find a paper jam. When I turn off and back on it will bring the paper completely through but then say there is a jam

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ajkill
  • 2035 Answers

SOURCE: Paper Jam issue

Turn the printer off and open the access cover.
Look for any obstructions in the paper path and remove them if necessary. (It is possible to move the carrier assembly with the power off.)
Turn the printer on, load some paper, and press the Form Feed button. (On the X83, press the Select button.)
Watch the paper as it feeds through and try to determine where the jam is occurring.
Check to see if all the rollers are turning.

If all the rollers are turning, there may be something in the feed path that you can't see. Go to step 6.
If not, there is probably a feed motor or a gear problem and the printer may require service.

If the paper is jamming under the carrier assembly, you may be able to fix it using the manual feed slot.
Turn the printer off.
Take a #10 envelope and feed it through the left side of the manual feed slot until it comes right through the printer to the back of the exit rollers.
Move it up and down first, and then slowly move it over to the right side. If something is stuck under the black guide plate, this may work it loose.

Posted on Mar 25, 2008

yalmer
  • 549 Answers

SOURCE: paper jam error message

Try this website for a paper jam problem with your printer.
Click Here

Posted on May 26, 2008

  • 4 Answers

SOURCE: 202 pam jam

usually it means that a sensor in your fuser is bad. If you have a P.M. Kit replaced the fuser and clean the printer.

but before you do, make sure that you have cleared all jams, including in the fuser.

Its probably time for a Preventive Maintanence

Posted on Aug 08, 2008

adnanbhatti
  • 1188 Answers

SOURCE: The paper jams when it tries to feed. I have

Use only recommended paper. Paper must be straight and low moisture content. Moisture can cause such problems.
If the problem remains then I ask whether your printer is new or dismantled for repairs?

Posted on Jul 29, 2009

  • 990 Answers

SOURCE: printer thinks there is a paper jam, but there is

Hello sir; First, check carefully go through entire paper path make sure there have nothing stuck over there, then check the both end of the cross bar ( carriage steel shaft ) find anything removed it.

Posted on Oct 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause paper jams in a hp 4100 printer


Where is it jamming. Printer this age could have fuser issues, worn rollers that are not picking up properly. Is the jammed paper crinkled up or does the printer stop before damaging the paper? If paper is not damaged, the cause is usually in the paper pickup slipping and causing the printer to think that the paper is either too long or too short. Clean all the rollers in the paper tray cavity with a damp cloth.

Sep 05, 2014 | HP LaserJet 4100 Printer

1 Answer

The printer thinks there is a paper jam-when we ask it to print it doesn't "grab" the next piece of paper-it clicks and then give a "paper jam" message please help


Typically these failure-to-feed problems are due to worn rollers - the feed roller is so worn
that it fails to feed the sheet of paper, which the printer misinterprets as a paper jam (because a
sensor tells the print processor that the sheet of paper is not present where is should be, and
therefore the printer microprocessor software issues a "PAPER JAM" error message).

The printer repair tech solution to this problem is to install a "roller kit," which entails the
replacement of every roller in the printer (since they all wear at about the same rate, replacing
just one is less effective than replacing them all).

Your quickie (temporary) solution - get the roller damp (this makes it grip a little better), then
load the paper tray to its maximum (pushing the paper into the paper pickup roller), then print a
couple precious pages while you order the roller kit online, and text your handy geek friend
who can change out all the rollers in your printer for a pizza.

Feb 18, 2011 | Canon PIXMA iP1600 Printer

1 Answer

My printer reads," Media Jam Registration" It of course will not print. I think I have cleaned all the jammed paper out of it but still will not work.


The paper registration senor accurator that tell the printer that paper has arrived and left the registration part of the paper flow may be broken (Sensor may be filled with paper dust) the accurator may be jammed.

Aug 09, 2010 | Minolta magicolor 3100 Laser Printer

1 Answer

Paper Jam


Usually with lexmarks its the sensor in there, it either has something going across it
Ths other thing it can be is the pinch roller that is in there if you can clean it with a qtip and achohol

Aug 13, 2009 | Lexmark X5150 All-In-One InkJet Printer

2 Answers

Paper jam no paper jam D7460


after going through your problem, i think that there is a communication failure between your printer and computer, in such cases, it is common to get false error messages like paper jam, etc, even though there is no actual paper jam. I recommend u uninstall and reinstall the printer driver. Im sure your issue will be resolved.

Aug 04, 2009 | HP Photosmart D7460 Printer

2 Answers

242.13 paper jam error We cannot find any paper jammed in the paper


hello,

The paper jam error 242.13 can be caused by an actual paper jam in the printer but since you did not find any paper the next thing would be pickup rollers. The pickup rollers can become worn and if they don't grap the paper right it will not more from the tray. There is a sensor that tells the printer that the paper exiting the paper tray and to start the printing. If this sensor does not detect paper when it should be there it gives a "paper jam" error thinking the paper is jammed. Look at the top page of paper for 1 or 2 light gray marks. If you see them then the rollers are the problem. You can see the rollers if you turn the printer on its side and remove the paper tray. To test the pickup rollers you can take off the rubber rollers( they look like white rubber band) from the wheel and turn them inside out, this will work as a temp fix untill you can get them replaced. If you need them replaced we can provide them or you can call a local repair show. I hope this helps, if so please rate my solution.

Buddy
Corporate Computer
Over 21 years of computer and printer support/repair

Jun 18, 2009 | Lexmark T644 Laser Printer

1 Answer

Paper jam


when that happens it's one of two things, or your printer needs your Manteinance Kit to be Replaced or it's an Issue related to a sensor that's under the toner cartdrige when that sensor it's dirty, it got stuck and make the machine thinks it has a jam when obviously there's nothing there hope that i could help

Sep 23, 2008 | Xerox Phaser 4500 Printer

3 Answers

Paper Jam error


Try feeding paper from the front, if it works, your paper pickup rollers maybe having problems (dusty/worn-out).

- Bianca

Jun 19, 2008 | Dell 1720dn Laser Printer

Not finding what you are looking for?
Lexmark X2670 All-In-One Printer Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18391 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...