Question about Vivitar ViviCam 3315 Digital Camera

1 Answer

Need imfo about the buttons on top of the camera/I bought the camera used

I do not know what to set the buttons on the top of the camera. Is this for the flash settings? Where should it be set for auto? thanks kim

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I just got this camera and it gets me difficult to adjust it to the time.Foreisntance I dont how to work with it at night. can you send me the manual?

Posted on Jan 07, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I bought my camera 4 years ago but till now still i cannot get a picture of me in my canon power shot A410, the problem is i dont know the steps in setting timer to get me a picture. can you please teach...


Press the FUNC/SET button. Use the cursor keys to select Drive Mode. Use left/right to select the desired delay and press FUNC/SET. Start the self-timer by pressing the shutter release button.

Full details are in the "Using the Self-Timer" section of the advanced guide. (page 35 in my copy). If you need any of the manuals, you can download them from the manufacturer's web site at
http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_a_series/powershot_a410#BrochuresAndManuals

http://www.usa.canon.com/cusa/support/consumer/
digital_cameras/powershot_a_series/
powershot_a410#BrochuresAndManuals

Aug 02, 2011 | Canon PowerShot A410 Digital Camera

1 Answer

I dont know how to use the self timer


Press the FUNC/SET button. Use up/down to select Drive Mode (the rectangle, third item from the top). Use left/right to select the desired delay and press FUNC/SET. Start the self-timer by pressing the shutter release button.

Feb 23, 2011 | Canon PowerShot A530 Digital Camera

1 Answer

I don't know how to activate the self timer on my canon a450 power shot camera


Press the FUNC/SET button. Use up/down to select Drive Mode (the rectangle, third item from the top). Use left/right to select the desired delay and press FUNC/SET. Start the self-timer by pressing the shutter release button.

Feb 09, 2011 | Cameras

1 Answer

I dont know how to set the automatic timer on my canon 510 power shot camera


Press the FUNC/SET button. Use up/down to select Drive Mode (the rectangle, third item from the top). Use left/right to select the desired delay and press FUNC/SET.

Start the self-timer by pressing the shutter release button.

Jan 09, 2011 | Cameras

1 Answer

I am putting in a used oem radio I bought and I have the tag with all the imfo, I need to know how to unlock the radio


turn key to run,press 1 and 4 together,hold till ------ lines show on display, next enter code..then press mn and oo will appear ,press mn again to make the last two digets agree with your code.....then press hr to make the first one or two digits agree.....then press am fm after code is confirmed,this works on my 98 gmc...wilfy

Oct 05, 2010 | 2005 Chevrolet Silverado 2500HD 2WD

1 Answer

Want to know can I set date and time


Yes. With the camera turned on, press the Menu button, and then scroll left or right until you are on the settings menu (hammer and wrench at the top). Scroll down until you are on the date/time setting option, and press the SET button. Use the left/right buttons to select month, day, year, hour, minute, and use the up/down buttons to change settings. Press SET to save, then press Menu to exit.

Apr 24, 2009 | Canon Cameras

1 Answer

Setting date on Canon elph Jr.


To set the date:
1. Press the Date button (rear left button on top of the camera)
2. Press the Select button (small round button up and to right of date button, may need pen point to press), display may show 97 1 1, with the 97 blinking.
3. Press the Set button (below the Select button) to change the value of the blinking character.
4. Press the Select button again to change to the next character. Use Set again to change. Repeat until date is set.
5. Press the Select button when all characters are set.

To set time, press the Date button again and the display should change to time (24 hour mode). Use the Select and Set buttons as above to set the correct time.

C, H, and P indicate the type of picture you want to take. C stands for Classic, and the picture will be in a standard aspect ratio. H is the wide angle setting, and the printed picture will be printed wide angle. P is panoramic, and the printed picture will be even wider angle than H. All this depends on the processor who develops your pictures for you. Ask if their equipment can read and process according to the instructions your camera will automatically put on each exposure on your film.

The three buttons on the left side are:
Top -- Flash setting. On (lightning bolt) or Off (lightning bolt with line through it).
Middle -- Film rewind button. Film should rewind automatically when fully exposed, but you can rewind before the film is fully exposed by using this button.
Bottom -- Self timer. Pressing this button puts a clock symbol on the display. When this is set, the shutter will delay 10 seconds after the shutter button is pressed. Press this button a second time to turn off the self timer.

Mar 17, 2009 | Canon Elph Jr. APS Point and Shoot Camera

1 Answer

How do I turn this camera off ????


Hi there. The power off lever is on the shutter release button. (the button you press to take a picture).
There are 3 positions for this lever, they are:
Power off is the middle setting while Power on is the top setting and the Self-timer as the bottom setting.

Replace your battery and remember to move the lever to the middle position to turn it off when your done. Don't forget to rate my solution, and have fun with your camera!

Rob

Mar 03, 2009 | Canon EOS-AE-1 35mm SLR Camera

1 Answer

My camera will not take multiple shots


Ok, what you need to do is look at the top of your camera, around that smaller LCD screen. On the right side of the screen, you will see a button with three boxes stacked on top of each other.

You need to press that button until it displays the same icon in the TOP RIGHT corner of the smaller LCD screen right next to the button you are pressing.

That button switches the camera from Single shot mode to Multiple shot mode ( as well as a few other modes).

Jan 18, 2009 | Nikon D80 Digital Camera with 18-135mm...

1 Answer

Close up pics with canon S3 IS


To get the sharpest possible pictures always mount your camera on a tripod.
Step 1 set your S3 camera to Program mode using the wheel control on top of the camera to P position.
Step 2 Press the function button on the rear of the camera, you will see a list of settings appear on the left side of the screen, you can scroll down through each of those settings using the up/down buttons of the up/down/left/right control on the back of the camera.
You can change the settings using the left/right buttons of that same up/down/left/right control. If you change a setting press the SET button to implement the change.
Set those settings as follows.
The top one set it to Zero
2nd one set it to AWB
3rd one set it to OFF
4th one set it to AEB (the center setting) then press SET button. your camera will now take 3 pictures each time you press the shutter, each at a different exposure setting so you can choose the best one.
5th one set it to Zero
6th one set it to Evaluative
7th one is video mode it is not neccessary to change this for taking stll pictures.
8th and last one, set it to L then press the SET button it takes you to a second option set this to S then press SET button again, now the display for that setting should show SL ( this sets your camera to use the highest resolution settings)

Now you have your camera set up you can get ready to take your pictures, press the function button again to close out the settings list.
Keep your camera in Program mode (P on the wheel control)
If you want to take close up pictures,
Press the macro button located on the left side of the lens close to the body of the camera it has a flower icon above it.
On your camera screen you will see it say macro, this is for close ups.
If you hold that same button down for about half a second it will change to super macro mode for extreme close ups. This allows your camera to focus on objects very close to the camera lens.
Position your camera as close to the subject as neccessary to make it fill the screen.
Now if you are using a tripoid, press the shooting mode selection button located just behind the shutter release button, each time you press this button you will see a different shooting mode appear on the screen. Press it repeatedly untill it says Self Timer. This mode allows you to press the shutter release then let go of the camera altogether so you will not cause camera shake. the camera will beep and take the picture several seconds later.
I would strongly recommend you use a tripod but f you are not using one ignore that last step and try to hold the camera as still as possible while you take the picture. If you follow those instructions you should get good sharp pictures.

Nov 04, 2008 | Canon PowerShot S3 IS Digital Camera

Not finding what you are looking for?
Vivitar ViviCam 3315 Digital Camera Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vivitar Cameras Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Tony

Level 3 Expert

2600 Answers

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

Are you a Vivitar Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...